Blog
  2. ASTM
  3. Washers
  4. ASTM A240 Specification

ASTM A240 Specification

Washers, Rings, Spectacle Blind Flanges, Spacers

Scope

ASTM A240 specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications.

Related Specifications of ASTM A240

ASTM B96 ASTM B127 ASTM B162 ASTM B168 ASTM B171 ASTM B265 ASTM B409 ASTM B424 ASTM B551 ASTM B708

ASTM A240 Chemical Composition

UNS DesignationB TypeC CD Mn P S Si Cr Ni Mo N Cu Other ElementsE, F
Austenitic (Chromium-Nickel) (Chromium-Manganese-Nickel)
N08020 . . . 0.07 2.00 0.045 0.035 1.00 19.0-21.0 32.0-38.0 2.00-3.00 . . . 3.00-4.00 Cb 8×C min,
1.00 max
N08367 . . . 0.030 2.00 0.040 0.030 1.00 20.0-22.0 23.5-25.5 6.0-7.0 0.18-0.25 0.75 . . .
N08700 . . . 0.04 2.00 0.040 0.030 1.00 19.0-23.0 24.0-26.0 4.3-5.0 . . . 0.50 Cb 8×C min
0.40 max
N08800 800G 0.10 1.50 0.045 0.015 1.00 19.0-23.0 30.0-35.0 . . . . . . 0.75 FeH 39.5 min
Al 0.15-0.60
Ti 0.15-0.60
N08810 800HG 0.05-0.10 1.50 0.045 0.015 1.00 19.0-23.0 30.0-35.0 . . . . . . 0.75 FeH 39.5 min
Al 0.15-0.60
Ti 0.15-0.60  
N08811 . . . 0.06-0.10 1.50 0.040 0.015 1.00 19.0-23.0 30.0-35.0 . . . . . . 0.75 FeH 39.5 min
TiI 0.25-0.60
AlI 0.25-0.60
N08904 904LG 0.020 2.00 0.045 0.035 1.00 19.0-23.0 23.0-28.0 4.00-5.00 0.10 1.00-2.00 . . .
N08925 . . . 0.020 1.00 0.045 0.030 0.50 19.0-21.0 24.0-26.0 6.00-7.00 0.10-0.20 0.80-1.50 . . .
N08926 . . . 0.020 2.00 0.030 0.010 0.50 19.0-21.0 24.0-26.0 6.00-7.00 0.15-0.25 0.50-1.50 . . .
S20100 201 0.15 5.50-7.50 0.060 0.030 1.00 16.0-18.0 3.5-5.5 . . . 0.25 . . . . . .
S20103 . . . 0.03 5.50-7.50 0.045 0.030 0.75 16.0-18.0 3.5-5.5 . . . 0.25 . . . . . .
S20153 . . . 0.03 6.40-7.50 0.045 0.015 0.75 16.0-17.5 4.0-5.0 . . . 0.10-0.25 1.00 . . .
S20161 . . . 0.15 4.00-6.00 0.040 0.040 3.00-4.00 15.0-18.0 4.0-6.0 . . . 0.08-0.20 . . . . . .
S20200 202 0.15 7.50-10.00 0.060 0.030 1.00 17.0-19.0 4.0-6.0 . . . 0.25 . . . . . .
S20400 . . . 0.030 7.00-9.00 0.040 0.030 1.00 15.0-17.0 1.50-3.00 . . . 0.15-0.30 . . . . . .
S20431 . . . 0.12 5.00-7.00 0.045 0.030 1.00 17.0-18.0 2.0-4.0 . . . 0.10-0.25 1.50-3.50 . . .
S20432 . . . 0.08 3.00-5.00 0.045 0.030 1.00 17.0-18.0 4.0-6.0 . . . 0.05-0.20 2.00-3.00 . . .
S20433 . . . 0.08 5.50-7.50 0.045 0.030 1.00 17.0-18.0 3.5-5.5 . . . 0.10-0.25 1.50-3.50 . . .
S20910 XM-19J 0.06 4.00-6.00 0.040 0.030 0.75 20.5-23.5 11.5-13.5 1.50-3.00 0.20-0.40 . . . Cb 0.10-0.30
V 0.10-0.30  
S21400 XM-31J 0.12 14.00-16.00 0.045 0.030 0.30-1.00 17.0-18.5 1.00 . . . 0.35 min . . . . . .
S21600 XM-17J 0.08 7.50-9.00 0.045 0.030 0.75 17.5-22.0 5.0-7.0 2.00-3.00 0.25-0.50 . . . . . .
S21603 XM-18J 0.03 7.50-9.00 0.045 0.030 0.75 17.5-22.0 5.0-7.0 2.00-3.00 0.25-0.50 . . . . . .
S21640 . . . 0.08 3.50-6.50 0.060 0.030 1.00 17.5-19.5 4.0-6.5 0.50-2.00 0.08-0.30 . . . Cb 0.10-1.00
S21800 . . . 0.10 7.00-9.00 0.060 0.030 3.5-4.5 16.0-18.0 8.0-9.0 . . . 0.08-0.18 . . . . . .
S21904 XM-11J 0.04 8.00-10.00 0.060 0.030 0.75 19.0-21.5 5.5-7.5 . . . 0.15-0.40 . . . . . .
S24000 XM-29J 0.08 11.50-14.50 0.060 0.030 0.75 17.0-19.0 2.3-3.7 . . . 0.20-0.40 . . . . . .
S30100 301 0.15 2.00 0.045 0.030 1.00 16.0-18.0 6.0-8.0 . . . 0.10 . . . . . .
S30103 301LG 0.03 2.00 0.045 0.030 1.00 16.0-18.0 6.0-8.0 . . . 0.20 . . . . . .
S30153 301LNG 0.03 2.00 0.045 0.030 1.00 16.0-18.0 6.0-8.0 . . . 0.07-0.20 . . . . . .
S30200 302 0.15 2.00 0.045 0.030 0.75 17.0-19.0 8.0-10.0 . . . 0.10 . . . . . .
S30400 304 0.07 2.00 0.045 0.030 0.75 17.5-19.5 8.0-10.5 . . . 0.10 . . . . . .
S30403 304L 0.030 2.00 0.045 0.030 0.75 17.5-19.5 8.0-12.0 . . . 0.10 . . . . . .
S30409 304H 0.04-0.10 2.00 0.045 0.030 0.75 18.0-20.0 8.0-10.5 . . . . . . . . . . . .
S30415 . . . 0.04-0.06 0.80 0.045 0.030 1.00-2.00 18.0-19.0 9.0-10.0 . . . 0.12-0.18 . . . Ce 0.03-0.08
S30435 . . . 0.08 2.00 0.045 0.030 1.00 16.0-18.0 7.0-9.0 . . . . . . 1.50-3.00 . . .
S30441 . . . 0.08 2.00 0.045 0.030 1.0-2.0 17.5-19.5 8.0-10.5 . . . 0.10 1.5-2.5 Cb 0.1-0.5
W 0.2-0.8
S30451 304N 0.08 2.00 0.045 0.030 0.75 18.0-20.0 8.0-10.5 . . . 0.10-0.16 . . . . . .
S30452 XM-21J 0.08 2.00 0.045 0.030 0.75 18.0-20.0 8.0-10.5 . . . 0.16-0.30 . . . . . .
S30453 304LN 0.030 2.00 0.045 0.030 0.75 18.0-20.0 8.0-12.0 . . . 0.10-0.16 . . . . . .
S30500 305 0.12 2.00 0.045 0.030 0.75 17.0-19.0 10.5-13.0 . . . . . . . . . . . .
S30530 . . . 0.08 2.00 0.045 0.030 0.50-2.50 17.0-20.5 8.5-11.5 0.75-1.50 . . . 0.75-3.50 . . .
S30600 . . . 0.018 2.00 0.020 0.020 3.7-4.3 17.0-18.5 14.0-15.5 0.20 . . . 0.50 . . .
S30601 . . . 0.015 0.50-0.80 0.030 0.013 5.0-5.6 17.0-18.0 17.0-18.0 0.20 0.05 0.35 . . .
S30615 . . . 0.16-0.24 2.00 0.030 0.030 3.2-4.0 17.0-19.5 13.5-16.0 . . . . . . . . . Al 0.80-1.50
S30815 . . . 0.05-0.10 0.80 0.040 0.030 1.40-2.00 20.0-22.0 10.0-12.0 . . . 0.14-0.20 . . . Ce 0.03-0.08
S30908 309S 0.08 2.00 0.045 0.030 0.75 22.0-24.0 12.0-15.0 . . . . . . . . . . . .
S30909 309HG 0.04-0.10 2.00 0.045 0.030 0.75 22.0-24.0 12.0-15.0 . . . . . . . . . . . .
S30940 309CbG 0.08 2.00 0.045 0.030 0.75 22.0-24.0 12.0-16.0 . . . . . . . . . Cb 10×C min
,1.10 max
S30941 309HCbG 0.04-0.10 2.00 0.045 0.030 0.75 22.0-24.0 12.0-16.0 . . . . . . . . . Cb 10×C min
, 1.10 max
S31008 310S 0.08 2.00 0.045 0.030 1.50 24.0-26.0 19.0-22.0 . . . . . . . . . . . .
S31009 310HG 0.04-0.10 2.00 0.045 0.030 0.75 24.0-26.0 19.0-22.0 . . . . . . . . . . . .
S31040 310CbG 0.08 2.00 0.045 0.030 1.50 24.0-26.0 19.0-22.0 . . . . . . . . . Cb 10×C min
, 1.10 max
S31041 310HCbG 0.04-0.10 2.00 0.045 0.030 0.75 24.0-26.0 19.0-22.0 . . . . . . . . . Cb 10×C min
, 1.10 max
S31050 310 MoLNG 0.020 2.00 0.030 0.010 0.50 24.0-26.0 20.5-23.5 1.60-2.60 0.09-0.15 . . . . . .
S31060 . . . 0.05-0.10 1.00 0.040 0.030 0.50 22.0-24.0 10.0-12.5 . . . 0.18-0.25 . . . Ce + La 0.025-0.070
Ce + La 0.025-0.070
B 0.001-0.010
S31254 . . . 0.020 1.00 0.030 0.010 0.80 19.5-20.5 17.5-18.5 6.0-6.5 0.18-0.25 0.50-1.00 . . .
S31266 . . . 0.030 2.00-4.00 0.035 0.020 1.00 23.0-25.0 21.0-24.0 5.2-6.2 0.35-0.60 1.00-2.50 W 1.50-2.50
S31277 . . . 0.020 3.00 0.030 0.010 0.50 20.5-23.0 26.0-28.0 6.5-8.0 0.30-0.40 0.50-1.50 . . .
S31600 316 0.08 2.00 0.045 0.030 0.75 16.0-18.0 10.0-14.0 2.00-3.00 0.10 . . . . . .
S31603 316L 0.030 2.00 0.045 0.030 0.75 16.0-18.0 10.0-14.0 2.00-3.00 0.10 . . . . . .
S31609 316H 0.04-0.10 2.00 0.045 0.030 0.75 16.0-18.0 10.0-14.0 2.00-3.00 . . . . . . . . .
S31635 316TiG 0.08 2.00 0.045 0.030 0.75 16.0-18.0 10.0-14.0 2.00-3.00 0.10 . . . Ti 5 × (C + N)  min
, 0.70 max
S31640 316CbG 0.08 2.00 0.045 0.030 0.75 16.0-18.0 10.0-14.0 2.00-3.00 0.10 . . . Cb 10 × C min
, 1.10 max
S31651 316N 0.08 2.00 0.045 0.030 0.75 16.0-18.0 10.0-14.0 2.00-3.00 0.10-0.16 . . . . . .
S31653 316LN 0.030 2.00 0.045 0.030 0.75 16.0-18.0 10.0-14.0 2.00-3.00 0.10-0.16 . . . . . .
S31700 317 0.08 2.00 0.045 0.030 0.75 18.0-20.0 11.0-15.0 3.0-4.0 0.10 . . . . . .
S31703 317L 0.030 2.00 0.045 0.030 0.75 18.0-20.0 11.0-15.0 3.0-4.0 0.10 . . . . . .
S31725 317LMG 0.030 2.00 0.045 0.030 0.75 18.0-20.0 13.5-17.5 4.0-5.0 0.20 . . . . . .
S31726 317LMNG 0.030 2.00 0.045 0.030 0.75 17.0-20.0 13.5-17.5 4.0-5.0 0.10-0.20 . . . . . .
S31727 . . . 0.030 1.00 0.030 0.030 1.00 17.5-19.0 14.5-16.5 3.8-4.5 0.15-0.21 2.80-4.00 . . .
S31730 . . . 0.030 2.00 0.040 0.010 1.00 17.0-19.0 15.0-16.5 3.0-4.0 0.045 4.0-5.0 . . .
S31753 317LNG 0.030 2.00 0.045 0.030 0.75 18.0-20.0 11.0-15.0 3.0-4.0 0.10-0.22 . . . . . .
S32050 . . . 0.030 1.50 0.035 0.020 1.00 22.0-24.0 20.0-23.0 6.0-6.8 0.21-0.32 0.4 . . .
S32053 . . . 0.030 1.00 0.030 0.010 1.00 22.0-24.0 24.0-26.0 5.0-6.0 0.17-0.22 . . . . . .
S32100 321 0.08 2.00 0.045 0.030 0.75 17.0-19.0 9.0-12.0 . . . 0.10 . . . Ti 5 × (C + N) min,
0.70 max
S32109 321H 0.04-0.10 2.00 0.045 0.030 0.75 17.0-19.0 9.0-12.0 . . . . . . . . . Ti 4 × (C + N) min
, 0.70 max
S32615 . . . 0.07 2.00 0.045 0.030 4.80-6.00 16.5-19.5 19.0-22.0 0.30-1.50 . . . 1.50-2.50 . . .
S32654 . . . 0.020 2.00-4.00 0.030 0.005 0.50 24.0-25.0 21.0-23.0 7.0-8.0 0.45-0.55 0.30-0.60 . . .
S33228 . . . 0.04-0.08 1.00 0.020 0.015 0.30 26.0-28.0 31.0-33.0 . . . . . . . . . Ce 0.05-0.10
Cb 0.6-1.0
Al 0.025
S33400 334G 0.08 1.00 0.030 0.015 1.00 18.0-20.0 19.0-21.0 . . . . . . . . . Al 0.15-0.60
Ti 0.15-0.60
S33425 . . . 0.08 1.50 0.045 0.020 1.00 21.0-23.0 20.0-23.0 2.00-3.00 . . . . . . Al 0.15-0.60
Ti 0.15-0.60
S33550 . . . 0.04-0.10 1.50 0.040 0.030 1.00 25.0-28.0 16.5-20.0 . . . 0.18-0.25 . . . Cb 0.05-0.15
La + Ce 0.025-0.070
S34565 . . . 0.030 5.00-7.00 0.030 0.010 1.00 23.0-25.0 16.0-18.0 4.0-5.0 0.40-0.60 . . . Cb 0.10
S34700 347 0.08 2.00 0.045 0.030 0.75 17.0-19.0 9.0-13.0 . . . . . . . . . Cb 10 × C min
, 1.00 max
S34709 347H 0.04-0.10 2.00 0.045 0.030 0.75 17.0-19.0 9.0-13.0 . . . . . . . . . Cb 8 × C min,
S34751 347LN 0.005-0.020 2.00 0.045 0.030 1.00 17.0-19.0 9.0-13.0 . . . 0.06-0.10 . . . Cb 0.20-0.50,
15 × C min
S34800 348 0.08 2.00 0.045 0.030 0.75 17.0-19.0 9.0-13.0 . . . . . . . . . (Cb + Ta) 10×C min
, 1.00 max
Ta 0.10
Co 0.20
S34809 348H 0.04-0.10 2.00 0.045 0.030 0.75 17.0-19.0 9.0-13.0 . . . . . . . . . (Cb + Ta) 8×C min,
1.00 max
Ta 0.10
Co 0.20
S35045 . . . 0.06-0.10 1.50 0.045 0.015 1.00 25.0-29.0 32.0-37.0 . . . . . . 0.75 Al 0.15-0.60
Ti 0.15-0.60
S35115 . . . 0.030 1.00 0.045 0.015 0.50-1.50 23.0-25.0 19.0-22.0 1.50-2.50 0.20-0.30 . . . . . .
S35125 . . . 0.10 1.00-1.50 0.045 0.015 0.50 20.0-23.0 31.0-35.0 2.00-3.00 . . . . . . Cb 0.25-0.60
S35135 . . . 0.08 1.00 0.045 0.015 0.60-1.00 20.0-25.0 30.0-38.0 4.0-4.8 . . . 0.75 Ti 0.40-1.00
S35140 . . . 0.10 1.00-3.00 0.045 0.030 0.75 20.0-22.0 25.0-27.0 1.00-2.00 0.08-0.20 . . . Cb 0.25-0.75
S35315 . . . 0.04-0.08 2.00 0.040 0.030 1.20-2.00 24.0-26.0 34.0-36.0 . . . 0.12-0.18 . . . Ce 0.03-0.10
S38100 XM-15J 0.08 2.00 0.030 0.030 1.50-2.50 17.0-19.0 17.5-18.5 . . . . . . . . . . . .
S38815 . . . 0.030 2.00 0.040 0.020 5.50-6.50 13.0-15.0 13.0-17.0 0.75-1.50 . . . 0.75-1.50 Al 0.30
Duplex (Austenitic-Ferritic)
S31200 . . . 0.030 2.00 0.045 0.030 1.00 24.0-26.0 5.5-6.5 1.20-2.00 0.14-0.20 . . . . . .
S31260 . . . 0.03 1.00 0.030 0.030 0.75 24.0-26.0 5.5-7.5 2.5-3.5 0.10-0.30 0.20-0.80 W 0.10-0.50
S31803 . . . 0.030 2.00 0.030 0.020 1.00 21.0-23.0 4.5-6.5 2.5-3.5 0.08-0.20 . . . . . .
S32001 . . . 0.030 4.00-6.00 0.040 0.030 1.00 19.5-21.5 1.00-3.00 0.60 0.05-0.17 1.00 . . .
S32003 . . . 0.030 2.00 0.030 0.020 1.00 19.5-22.5 3.0-4.0 1.50-2.00 0.14-0.20 . . . . . .
S32101 . . . 0.040 4.00-6.00 0.040 0.030 1.00 21.0-22.0 1.35-1.70 0.10-0.80 0.20-0.25 0.10-0.80 . . .
S32202 . . . 0.030 2.00 0.040 0.010 1.00 21.5-24.0 1.00-2.80 0.45 0.18-0.26 . . . . . .
S32205 2205G 0.030 2.00 0.030 0.020 1.00 22.0-23.0 4.5-6.5 3.0-3.5 0.14-0.20 . . . . . .
S32304 2304G 0.030 2.50 0.040 0.030 1.00 21.5-24.5 3.0-5.5 0.05-0.60 0.05-0.20 0.05-0.60  
S32506 . . . 0.030 1.00 0.040 0.015 0.90 24.0-26.0 5.5-7.2 3.0-3.5 0.08-0.20 . . . W 0.05-0.30
S32520 . . . 0.030 1.50 0.035 0.020 0.80 24.0-26.0 5.5-8.0 3.0-4.0 0.20-0.35 0.50-2.00 . . .
S32550 255G 0.04 1.50 0.040 0.030 1.00 24.0-27.0 4.5-6.5 2.9-3.9 0.10-0.25 1.50-2.50 . . .
S32750 2507G,O 0.030 1.20 0.035 0.020 0.80 24.0-26.0 6.0-8.0 3.0-5.0 0.24-0.32 0.50 . . .
S32760K . . . 0.030 1.00 0.030 0.010 1.00 24.0-26.0 6.0-8.0 3.0-4.0 0.20-0.30 0.50-1.00 W 0.50-1.00
S32808 . . . 0.030 1.10 0.030 0.010 0.50 27.0-27.9 7.0-8.2 0.80-1.2 0.30-0.40 . . . W 2.10-2.50
S32900 329 0.08 1.00 0.040 0.030 0.75 23.0-28.0 2.0-5.00 1.00-2.00 . . . . . . . . .
S32906 . . . 0.030 0.80-1.50 0.030 0.030 0.80 28.0-30.0 5.8-7.5 1.50-2.60 0.30-0.40 0.80 . . .
S32950 . . . 0.030 2.00 0.035 0.010 0.60 26.0-29.0 3.5-5.2 1.00-2.50 0.15-0.35 . . . . . .
S39274 . . . 0.030 1.00 0.030 0.020 0.80 24.0-26.0 6.0-8.0 2.5-3.5 0.24-0.32 0.20-0.80 W 1.50-2.50
S81921 . . . 0.030 2.00-4.00 0.040 0.030 1.00 19.0-22.0 2.0-4.0 1.00-2.00 0.14-0.20 . . . . . .
S82011 . . . 0.030 2.00-3.00 0.040 0.020 1.00 20.5-23.5 1.0-2.0 0.10-1.00 0.15-0.27 0.50 . . .
S82012 . . . 0.05 2.00-4.00 0.040 0.005 0.80 19.0-20.5 0.8-1.5 0.10-0.60 0.16-0.26 1.00 . . .
S82031 . . . 0.05 2.50 0.040 0.005 0.80 19.0-22.0 2.0-4.0 0.60-1.40 0.14-0.24 1.00 . . .
S82121 . . . 0.035 1.00-2.50 0.040 0.010 1.00 21.0-23.0 2.0-4.0 0.30-1.30 0.15-0.25 0.20-1.20 . . .
S82122 . . . 0.030 2.0-4.0 0.040 0.020 0.75 20.5-21.5 1.5-2.5 0.60 0.15-0.20 0.50-1.50 . . .
S82441 . . . 0.030 2.50-4.00 0.035 0.005 0.70 23.0-25.0 3.0-4.5 1.00-2.00 0.20-0.30 0.10-0.80 . . .
Ferritic or Martensitic (Chromium)
S32803 . . . 0.015 0.50 0.020 0.0035 0.55 28.0-29.0 3.0-4.0 1.80-2.50 0.020 (C+N) 0.030 . . . Cb 12×(C+N)  min,
0.15-0.50
S40300 403 0.15 1.00 0.040 0.030 0.50 11.5-13.0 0.60 . . . . . .    . . . . . .
S40500 S40900L 405
409L		 0.08 1.00 0.040 0.030 1.00 11.5-14.5 0.60 . . . . . .    . . . Al 0.10-0.30
S40910 . . . 0.030 1.00 0.040 0.020 1.00 10.5-11.7 0.50 . . . 0.03 . . . Ti 6×(C+N) min,
0.50 max;
Cb 0.17
S40920 . . . 0.030 1.00 0.040 0.020 1.00 10.5-11.7 0.50 . . . 0.030 . . . Ti 8×(C+N) min,
Ti  0.15-0.50;
Cb 0.10
S40930 . . . 0.030 1.00 0.040 0.020 1.00 10.5-11.7 0.50 . . . 0.030 . . . (Ti+Cb) [0.08+8 ×
(C+N)] min,
0.75 max;
Ti 0.05 min
S40945 . . . 0.030 1.00 0.040 0.030 1.00 10.5-11.7 0.50 . . . 0.030 . . . Cb 0.18-0.40
Ti 0.05-0.20
S40975 . . . 0.030 1.00 0.040 0.030 1.00 10.5-11.7 0.50-1.00 . . . 0.030 . . . Ti 6×(C+N) min,
0.75 max
S40977 . . . 0.030 1.50 0.040 0.015 1.00 10.5-12.5 0.30-1.00 . . . 0.030 . . . . . .
S41000 410 0.08-0.15 1.00 0.040 0.030 1.00 11.5-13.5 0.75 . . . . . . . . . . . .
S41003 . . . 0.030 1.50 0.040 0.030 1.00 10.5-12.5 1.50 . . . 0.030 . . . . . .
S41008 410S 0.08 1.00 0.040 0.030 1.00 11.5-13.5 0.60 ... ... ... ...
S41045 ... 0.030 1.00 0.040 0.030 1.00 12.0-13.0 0.50 ... 0.030 ... Cb 9×(C+N) min,
0.60 max
S41050 . . . 0.04 1.00 0.045 0.030 1.00 10.5-12.5 0.60-1.10 . . . 0.10 . . . . . .
S41500M . . . 0.05 0.50-1.00 0.030 0.030 0.60 11.5-14.0 3.5-5.5 0.50-1.00 . . . . . . . . .
S42000 420 0.15 min 1.00 0.040 0.030 1.00 12.0-14.0 0.75 0.50 . . . . . . . . .
S42035 . . . 0.08 1.00 0.045 0.030 1.00 13.5-15.5 1.0-2.5 0.2-1.2 . . . . . . Ti 0.30-0.50
S42200 422 0.20-0.25 0.50-1.00 0.025 0.025 0.50 11.0-12.5 0.50-1.00 0.90-1.25 . . . . . . V 0.20-0.30
W 0.90-1.25,
S42900 429G 0.12 1.00 0.040 0.030 1.00 14.0-16.0 . . . . . . . . . . . . . . .
S43000 430 0.12 1.00 0.040 0.030 1.00 16.0-18.0 0.75 . . . . . . . . . . . .
S43035 439 0.030 1.00 0.040 0.030 1.00 17.0-19.0 0.50 . . . 0.030 . . . Ti [0.20+4(C+N)] min,
1.10 max; Al 0.15
S43100 431 0.20 1.00 0.040 0.030 1.00 15.0-17.0 1.25-2.50 . . . . . . . . . . . .
S43400 434 0.12 1.00 0.040 0.030 1.00 16.0-18.0 . . . 0.75-1.25 . . . . . . . . .
S43600 436 0.12 1.00 0.040 0.030 1.00 16.0-18.0 . . . 0.75-1.25 . . . . . . Cb 5×C min,
0.80 max
S43932 . . . 0.030 1.00 0.040 0.030 1.00 17.0-19.0 0.50 . . . 0.030 . . . (Ti+Cb) [0.20+4(C+N)] min,
0.75 max; Al 0.15
S43940 . . . 0.030 1.00 0.040 0.015 1.00 17.5-18.5 . . . . . . . . . . . . Ti 0.10-0.60
Cb [0.30+(3×C)] min
S44100 . . . 0.030 1.00 0.040 0.030 1.00 17.5-19.5 1.00 . . . 0.030 . . . Ti 0.1-0.5
Cb [0.3 + (9× C)] min, 0.90 max
S44200 442 0.20 1.00 0.040 0.040 1.00 18.0-23.0 0.60 . . . . . . . . . . . .
S44330 . . . 0.025 1.00 0.040 0.030 1.00 20.0-23.0 . . . . . . 0.025 0.30-0.80 (Ti+Cb) 8×
(C+N)
min, 0.80 max
S44400 444 0.025 1.00 0.040 0.030 1.00 17.5-19.5 1.00 1.75-2.50 0.035 . . . (Ti+Cb)[0.20+
4(C+N)] min,
0.80 max
S44500 . . . 0.020 1.00 0.040 0.012 1.00 19.0-21.0 0.60 . . . 0.03 0.30-0.60 Cb 10×(C+N) min,
0.80 max
S44535 . . . 0.030 0.30-0.80 0.050 0.020 0.50 20.0-24.0 . . . . . . . . . 0.50 La 0.04-0.20
Ti 0.03-0.20
Al 0.50
S44536 . . . 0.015 1.00 0.040 0.030 1.00 20.0-23.0 0.5 . . . 0.015 . . . (Ti+Cb) 8X(C+N)-0.8,
Cb min 0.05
S44537 . . . 0.030 0.8 0.050 0.006 0.1-0.6 20.0-24.0 0.5 . . . 0.04 0.5 Al 0.1 W 1.0-3.0
Cb 0.2-1.0
Ti 0.02-0.20
S44626 XM-33J 0.06 0.75 0.040 0.020 0.75 25.0-27.0 0.50 0.75-1.50 0.04 0.20 La 0.04-0.20
Ti 0.20-1.00;
S44627 XM-27J 0.010N 0.40 0.020 0.020 0.40 25.0-27.5 0.50 0.75-1.50 0.015N 0.20 Ti 7(C+N) min
Cb 0.05-0.20
(Ni + Cu) 0.50
S44635 . . . 0.025 1.00 0.040 0.030 0.75 24.5-26.0 3.5-4.5 3.5-4.5 0.035 . . . (Ti+Cb) [0.20+4
(C+N)] min, 0.80 max
S44600 446 0.20 1.50 0.040 0.030 1.00 23.0-27.0 0.75 . . . 0.25 . . . . . .
S44660 . . . 0.030 1.00 0.040 0.030 1.00 25.0-28.0 1.0-3.5 3.0-4.0 0.040 . . . (Ti+Cb) 0.20 − 1.00,
Ti + Cb 6×(C+N) min
S44700 . . . 0.010 0.30 0.025 0.020 0.20 28.0-30.0 0.15 3.5-4.2 0.020 0.15 (C+N) 0.025
S44725 . . . 0.015 0.40 0.040 0.020 0.040 25.0-28.5 0.30 1.5-2.5 0.018 . . . (Ti+Cb) ≥ 8×(C+N
S44735 . . . 0.030 1.00 0.040 0.030 1.00 28.0-30.0 1.00 3.6-4.2 0.045 . . . (Ti+Cb) 0.20-1.00,
(Ti+Cb) 6× (C+N) min
S44800 . . . 0.010 0.30 0.025 0.020 0.20 28.0-30.0 2.00-2.50 3.5-4.2 0.020 0.15 (C+N) 0.025
S46800 . . . 0.030 1.00 0.040 0.030 1.00 18.0-20.0 0.50 . . . 0.030 . . . Ti 0.07-0.30
Cb 0.10-0.60
(Ti+Cb) [0.20+4 (C+N)] min,
0.80 max
  • A Maximum, unless range or minimum is indicated. Where ellipses (. . .) appear in this table, there is no requirement and the element need not be determined or reported.
  • B Designation established in accordance with Practice E527 and SAE J 1086.
  • C Unless otherwise indicated, a grade designation originally assigned by the American Iron and Steel Institute (AISI).
  • D Carbon analysis shall be reported to nearest 0.01 % except for the low-carbon types, which shall be reported to nearest 0.001 %.
  • E The terms Columbium (Cb) and Niobium (Nb) both relate to the same element.
  • F When two minimums or two maximums are listed for a single type, as in the case of both a value from a formula and an absolute value, the higher minimum or lower maximum shall apply.
  • G Common name, not a trademark, widely used, not associated with any one producer.
  • H Iron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements.
  • I (Al + Ti) 0.85-1.20.
  • J Naming system developed and applied by ASTM.
  • K Cr + 3.3 Mo + 16 N = 40 min.
  • L S40900 (Type 409) has been replaced by S40910, S40920, and S40930. Unless otherwise specified in the ordering information, an order specifying S40900 or Type 409 shall be satisfied by any one of S40910, S40920, or S40930 at the option of the seller. Material meeting the requirements of S40910, S40920, or S40930, may at the option of the manufacturer be certified as S40900.
  • M Plate version of CA-6NM.
  • N Product (check or verification) analysis tolerance over the maximum limit for C and N in XM-27 shall be 0.002 %.
  • O Cr + 3.3 Mo + 16 N = 41 min.

ASTM A240 Mechanical Requirements

UNS Designation TypeA Tensile Strength,
min		 Yield Strength,
B min		 Elongation in 2 in.
or 50 mm, min, %		 Hardness, maxC Cold Bend°D
ksi MPa ksi MPa Brinell.HBW Rockwell
N08020 . . . 80 550 35 240 30E 217 95 HRBW not required
N08367 Sheet and Strip . . . 100 690 45 310 30 . . . 100 HRBW not required
Plate . . . 95 655 45 310 30 241 . . . not required
N08700 . . . 80 550 35 240 30 192 90 HRBW not required
N08800 800F 75 520 30G 205G 30H ... ... not required
N08810 800HF 65 450 25G 170G 30 . . . . . . not required
N08811 . . . 65 450 25 170 30 . . . . . . not required
N08904 904LF 71 490 31 220 35 . . . 90 HRBW not required
N08925 . . . 87 600 43 295 40 . . . . . . not required
N08926 . . . 94 650 43 295 35 . . . . . . not required
S20100 201-1I 75 515 38 260 40 217 95 HRBW . . .
S20100 201-2I 95 655 45 310 40 241 100 HRBW . . .
S20103 201LF 95 655 38 260 40 217 95 HRBW not required
S20153 201LNF 95 655 45 310 45 241 100 HRBW not required
S20161 . . . 125 860 50 345 40 255 25 HRC not required
S20200 202 90 620 38 260 40 241 . . . . . .
S20400 . . . 95 655 48 330 35 241 100 HRBW not required
S20431 . . . 90 620 45 310 40 241 100 HRBW not required
S20432 . . . 75 515 30 205 40 201 92 HRBW not required
S20433 . . . 80 550 35 240 40 217 95 HRBW not required
S20910 Sheet and Strip XM-19J 105 725 60 415 30 241 100 HRBW not required
Plate 100 690 55 380 35 241 100 HRBW not required
S21600 Sheet and Strip XM-17J 100 690 60 415 40 241 100 HRBW not required
Plate 90 620 50 345 40 241 100 HRBW not required
S21603 Sheet and Strip XM-18J 100 690 60 415 40 241 100 HRBW not required
Plate 90 620 50 345 40 241 100 HRBW not required
S21640 . . . 95 650 45 310 40 . . . . . . not required
S21800 . . . 95 655 50 345 35 241 100 HRBW not required
S21904 Sheet and Strip XM-11J 100 690 60 415 40 241 100 HRBW not required
Plate 90 620 50 345 45 241 100 HRBW not required
S24000 Sheet and Strip XM-29J 100 690 60 415 40 241 100 HRBW not required
Plate 100 690 55 380 40 241 100 HRBW not required
S30100 301 75 515 30 205 40 217 95 HRBW not required
S30103 301LF 80 550 32 220 45 241 100 HRBW not required
S30153 301LNF 80 550 35 240 45 241 100 HRBW not required
S30200 302 75 515 30 205 40 201 92 HRBW not required
S30400 304 75 515 30 205 40 201 92 HRBW not required
S30403 304L 70 485 25 170 40 201 92 HRBW not required
S30409 304H 75 515 30 205 40 201 92 HRBW not required
S30415 . . . 87 600 42 290 40 217 95 HRBW not required
S30435 . . . 65 450 23 155 45 187 90 HRBW . . .
S30441 . . . 75 515 30 205 40 201 92 HRBW not required
S30451 304N
XM-21J		 80 550 35 240 30 217 95 HRBW not required
S30452 Sheet and Strip XM-21J 90 620 50 345 30 241 100 HRBW not required
Plate 85 585 40 275 30 241 100 HRBW not required
S30453 304LN 75 515 30 205 40 217 95 HRBW not required
S30500 305 70 485 25 170 40 183 88 HRBW not required
S30530 . . . 75 515 30 205 40 201 92 HRBW not required
S30600 . . . 78 540 35 240 40 . . . . . . . . .
S30601 . . . 78 540 37 255 30 . . . . . . not required
S30615 . . . 90 620 40 275 35 217 95 HRBW not required
S30815 . . . 87 600 45 310 40 217 95 HRBW . . .
S30908 309S 75 515 30 205 40 217 95 HRBW not required
S30909 309HF 75 515 30 205 40 217 95 HRBW not required
S30940 309CbF 75 515 30 205 40 217 95 HRBW not required
S30941 309HCbF 75 515 30 205 40 217 95 HRBW not required
S31008 310S 75 515 30 205 40 217 95 HRBW not required
S31009 310HF 75 515 30 205 40 217 95 HRBW not required
S31040 310CbF 75 515 30 205 40 217 95 HRBW not required
S31041 310HCbF 75 515 30 205 40 217 95 HRBW not required
S31050 310 MoLNF
t ≤ 0.25 in.
t > 0.25 in.		 84 580 39 270 25 217 95 HRBW not required
78 540 37 255 25 217 95 HRBW not required
S31060 . . . 87 600 41 280 40 217 95 HRBW not required
S31254 Sheet and Strip . . . 100 690 45 310 35 223 96 HRBW not required
Plate . . . 95 655 45 310 35 223 96 HRBW not required
S31266 . . . 109 750 61 420 35 . . . . . . not required
S31277 . . . 112 770 52 360 40 . . . . . . not required
S31600 316 75 515 30 205 40 217 95 HRBW not required
S31603 316L 70 485 25 170 40 217 95 HRBW not required
S31609 316H 75 515 30 205 40 217 95 HRBW not required
S31635 316TiF 75 515 30 205 40 217 95 HRBW not required
S31640 316CbF 75 515 30 205 30 217 95 HRBW not required
S31651 316N 80 550 35 240 35 217 95 HRBW not required
S31653 316LN 75 515 30 205 40 217 95 HRBW not required
S31700 317 75 515 30 205 35 217 95 HRBW not required
S31703 317L 75 515 30 205 40 217 95 HRBW not required
S31725 317LMF 75 515 30 205 40 217 95 HRBW not required
S31726 317LMNF 80 550 35 240 40 223 96 HRBW not required
S31727 . . . 80 550 36 245 35 217 96 HRBW not required
S31730 . . . 70 480 25 175 35 . . . 90 HRBW not required
S31753 317LN 80 550 35 240 40 217 95 HRBW not required
S32050 . . . 98 675 48 330 40 250 . . . not required
S32053 . . . 93 640 43 295 40 217 96 HRBW not required
S32100 321 75 515 30 205 40 217 95 HRBW not required
S32109 321H 75 515 30 205 40 217 95 HRBW not required
S32615K . . . 80 550 32 220 25 . . . . . . not required
S32654 . . . 109 750 62 430 40 250 . . . not required
S33228 . . . 73 500 27 185 30 217 95 HRBW not required
S33400 334F 70 485 25 170 30 . . . 92 HRBW not required
S33425 . . . 75 515 30 205 40 . . . . . . not required
S33550 . . . 87 600 41 280 35 217 95 HRBW not required
S34565 . . . 115 795 60 415 35 241 100 HRBW not required
S34700 347 75 515 30 205 40 201 92 HRBW not required
S34709 347H 75 515 30 205 40 201 92 HRBW not required
S34751 347LN 75 515 30 205 40 201 92 HRBW not required
S34800 348 75 515 30 205 40 201 92 HRBW not required
S34809 348H 75 515 30 205 40 201 92 HRBW not required
S35045 . . . 70 485 25 170 35 . . . . . . not required
S35115 . . . 85 585 40 275 40 241 100 HRBW not required
S35125 . . . 70 485 30 205 35 . . . . . . not required
S35135 Sheet and Strip   80 550 30 205 30 . . . . . . not required
Plate . . . 75 515 30 205 30 . . . . . . not required
S35140 . . . 90 620 40 275 30 241 100 HRBW not required
S35315 . . . 94 650 39 270 40 217 95 HRBW not required
S38100 XM-15J 75 515 30 205 40 217 95 HRBW not required
S38815 . . . 78 540 37 255 30 . . . . . . not required
Duplex (Austenitic-Ferritic)
S31200 . . . 100 690 65 450 25 293 31 HRC not required
S31260 . . . 100 690 70 485 20 290 . . . . . .
S31803 . . . 90 620 65 450 25 293 31 HRC not required
S32001 . . . 90 620 65 450 25 . . . 25 HRC not required
S32003 t ≤ 0.187 in.
[5.00 mm]		 100 690 70 485 25 293 31 HRC not required
t > 0.187 in.
[5.00 mm]		 95 655 65 450 25 293 31 HRC not required
S32101 t ≤ 0.187 in.
[5.00 mm]		 101 700 77 530 30 290 31 HRC not required
t > 0.187 in.
[5.00 mm]		 94 650 65 450 30 290 31 HRC not required
S32202 . . . 94 650 65 450 30 290 31 HRC not required
S32205 2205F 95 655 65 450 25 293 31 HRC not required
S32304 2304F 87 600 58 400 25 290 32 HRC not required
S32506 . . . 90 620 65 450 18 302 32 HRC not required
S32520 . . . 112 770 80 550 25 310 32 HRC not required
S32550 255F 110 760 80 550 15 302 32 HRC not required
S32750 2507F 116 795 80 550 15 310 32 HRC not required
S32760 . . . 108 750 80 550 25 270 28 HRC not required
S32808 . . . 101 700 72 500 15 310 32 HRC not required
S32900 329 90 620 70 485 15 269 28 HRC not required
S32906 t ≤ 0.187 in.
[10.0 mm]		 116 800 94 650 25 310 32 HRC not required
t > 0.187 in.
[10.0 mm]		 109 750 80 550 25 310 32 HRC not required
S32950L . . . 100 690 70 485 15 293 32 HRC not required
S39274 . . . 116 800 80 550 15 310 32 HRC not required
S81921 . . . 90 620 65 450 25 293 31 HRC not required
S82011 t ≤ 0.187 in.
[5.00 mm]		 101 700 75 515 30 293 31 HRC not required
t > 0.187 in.
[5.00 mm]		 95 655 65 450 30 293 31 HRC not required
S82012 t > 0.187 in.
[5.00 mm]		 94 650 58 400 35 290
t ≤ 0.187 in.
[5.00 mm]		 102 700 73 500 35 31 HRC not required
S82031 t > 0.187 in.
[5.0 mm]		 94 650 58 400 35 290   not required
t ≤ 0.187 in.
[5.0 mm]		 102 700 73 500 35   31 HRC not required
S82121 . . . 94 650 65 450 25 286 30 HRC not required
S82122 t < 0.187 in.
[3.0 mm]		 101 700 72 500 25 290 32 HRC not required
t ≥ 0.187 in.
[3.0 mm]		 87 600 58 400 30 290 32 HRC not required
S82441 t < 0.187 in.
[10.0 mm]		 107 740 78 540 25 290 31 HRC not required
t ≥ 0.187 in.
[10.0 mm]		 99 680 70 480 25 290 31 HRC not required
Ferritic or Martensitic (Chromium)
S32803 . . . 87 600 72 500 16 241 100 HRBW not required
S40300 403 70 485 30 205 25N 217 96 HRBW 180
S40500
S40900M		 405
409M		 60 415 25 170 20 179 88 HRBW 180
S40910 . . . 55 380 25 170 20 179 88 HRBW 180
S40920 . . . 55 380 25 170 20 179 88 HRBW 180
S40930 . . . 55 380 25 170 20 179 88 HRBW 180
S40945 . . . 55 380 30 205 22 . . . 80 HRBW 180
S40975 . . . 60 415 40 275 20 197 92 HRBW 180
S40977 . . . 65 450 41 280 18 180 88 HRBW not required
S41000 410 65 450 30 205 20 217 96 HRBW 180
S41003 . . . 66 455 40 275 18 223 20 HRC not required
S41008 410S 60 415 30 205 22N 183 89 HRBW 180
S41045 . . . 55 380 30 205 22 . . . 80 HRBW 180
S41050 . . . 60 415 30 205 22 183 89 HRBW 180
S41500 . . . 115 795 90 620 15 302 32 HRC not required
S42000 420 100Q 690Q . . . . . . 15 217 96 HRBW not required
S42035 . . . 80 550 55 380 16 180 88 HRBW not required
S42200 422 . . . . . . . . . . . . . . . 248 24 HRC not required
S42900 429F 65 450 30 205 22N 183 89 HRBW 180
S43000 430 65 450 30 205 22N 183 89 HRBW 180
S43035 439 60 415 30 205 22 183 89 HRBW 180
S43100 431 . . . . . . . . . . . . . . . 285 29 HRC not required
S43400 434 65 450 35 240 22 . . . 89 HRBW 180
S43600 436 65 450 35 240 22 . . . 89 HRBW 180
S43932 . . . 60 415 30 205 22 183 89 HRBW 180
S43940 . . . 62 430 36 250 18 180 88 HRBW not required
S44330 . . . 56 390 30 205 22 187 90 HRBW not required
S44100 . . . 60 414 35 241 20 190 90 HRBW not required
S44200 442 65 515 40 275 20 217 96 HRBW 180
S44400 . . . 60 415 40 275 20 217 96 HRBW 180
S44500 . . . 62 427 30 205 22 . . . 83 HRBW 180
S44535 . . . 58 400 36 250 25E ... 90O HRBW not required
S44536 . . . 60 410 35 245 20 192 90 HRBW 180
S44537 . . . 65 450 46 320 18P 200 93 HRBW 180
S44600 446 65 515 40 275 20 217 96 HRBW 135
S44626 XM-33J 68 470 45 310 20 217 96 HRBW 180
S44627 XM-27J 65 450 40 275 22 187 90 HRBW 180
S44635 . . . 90 620 75 515 20 269 28 HRC 180
S44660 . . . 85 585 65 450 18 241 100 HRBW 180
S44700 . . . 80 550 60 415 20 223 20 HRC 180
S44725 . . . 65 450 40 275 20 210 95 HRBW 180
S44735 . . . 80 550 60 415 18 255 25 HRC 180
S44800 . . . 80 550 60 415 20 223 20 HRC 180
S46800 . . . 60 415 30 205 22 . . . 90 HRBW 180
  • A Maximum, unless range or minimum is indicated. Where ellipses (. . .) appear in this table, there is no requirement and the element need not be determined or reported.
  • B Designation established in accordance with Practice E527 and SAE J 1086.
  • C Unless otherwise indicated, a grade designation originally assigned by the American Iron and Steel Institute (AISI).
  • D Carbon analysis shall be reported to nearest 0.01 % except for the low-carbon types, which shall be reported to nearest 0.001 %.
  • E The terms Columbium (Cb) and Niobium (Nb) both relate to the same element.
  • F When two minimums or two maximums are listed for a single type, as in the case of both a value from a formula and an absolute value, the higher minimum or lower maximum shall apply.
  • G Common name, not a trademark, widely used, not associated with any one producer.
  • H Iron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements.
  • I (Al + Ti) 0.85-1.20.
  • J Naming system developed and applied by ASTM.
  • K Cr + 3.3 Mo + 16 N = 40 min.
  • L S40900 (Type 409) has been replaced by S40910, S40920, and S40930. Unless otherwise specified in the ordering information, an order specifying S40900 or Type 409 shall be satisfied by any one of S40910, S40920, or S40930 at the option of the seller. Material meeting the requirements of S40910, S40920, or S40930, may at the option of the manufacturer be certified as S40900.
  • M Plate version of CA-6NM.
  • N Product (check or verification) analysis tolerance over the maximum limit for C and N in XM-27 shall be 0.002 %.
  • O Cr + 3.3 Mo + 16 N = 41 min

ASTM A240 Certifications

  • EN 10204 3.1
  • EN 10204 3.2
  • PED 2014/68/EC
  • MERKBLATT AD 2000 W2/W7/W10
  • API 20 E BSL 1/ BSL 2
  • NACE MR 0175
  • NACE MR 0103

ASTM A240 Supplementary Requirements

S1 Charpy Impact Testing of Plate 
S2 Materials for High-Temperature Service