Werkstoff 2.4360 Monel 400 Stainless Steel Forgings
2.4360, NICU30, 400, N04400
2.4360 Forgings are classified under Monel. Werkstoff 2.4360 Forgings are internationally known as forgings manufactured from monel 400.
Related Products
Nickel-Copper 400 Boltsmonel Alloy 400 Bolts Monel 400 Fasteners Monel 400 Forgings Nickel-Copper 400 Nuts Nickel-Copper 400 Screws Alloy 400 Springs Monel 400 Studs Nickel-Copper 400 Washersmonel Alloy 400 Washers 2.4360 Nuts
Werkstoff 2.4360 Stainless Steel Forgings Properties
Werkstoff 2.4360 Stainless Steel Forgings Chemical Requirements
| UNS | Element | Composition, % | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cu | Fe | Mn | C | Si | S | Cr | Al | Ti | Nb + Ta | Mo | P | W | Co | V | N | B | La | Al + Ta | Ni + Mo | Nb | Ta | Zr | Ce | Y | Mg | ||
| UNS N04400 | Ni Cu Alloy | 63.0B min | 28.0-34.0 | 2.5 | 2.0 | 0.3 | 0.5 | 0.024 | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... |
Werkstoff 2.4360 Stainless Steel Forgings Mechanical Requirements
| Material and Condition | Maximum Section Thickness, in. (mm) | Tensile Strength, min, ksi (MPa) | Yield Strength, 0.2 % Offset, min, ksi (MPa) | Elongation in 2 in. or 50 mm or 4D, min, % |
|---|---|---|---|---|
| Nickel-copper alloy UNS N04400, annealed | ... | 70 (483) | 25 (172) | 35 |