Inconel 600 Fasteners
B166 N06600, F468 N06600, 2.4816, NCF 600, NICR15FE, N06600
Inconel 600 Fasteners are fasteners manufactured from alloy containing nickel as base element with additions of chromium. Inconel 600 Fasteners have good resistance to aqueous corrosion, has high mechanical strength, and is readily formed and machined. TorqBolt is an eminent Inconel 600 fastener supplier in India.
Related Products
Inconel 600 Hex Bolts Inconel Alloy 600 Fasteners Inconel 600 Forgings Inconel 600 Nuts Inconel 600 Screws Alloy 600 Springs Inconel 600 Threaded Rod Inconel 600 Washers 2.4816 Screws
Inconel 600 Fasteners Properties
Inconel 600 Chemical Requirements
| Composition Limits, % | Element | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS | Ni | Cr | S | Mo | Fe | Mn | Al | C | Cu | Si | S | Ti | P | Zr | Y | B | N | Nb | Ce | W |
| UNS N06600 | 72.0 min | 14.0-17.0 | ... | ... | 6.0-10.0 | 1.0 max | ... | 0.15 max | 0.5 max | 0.5 max | 0.015 max | ... | ... | ... | ... | ... | ... | ... | ... | ... |
Inconel 600 Mechanical Requirements
| Condition and Diameter or Distance Between Parallel Surfaces, in. (mm) |
Tensile Strength, min, psi (MPa) |
Yield Strength (0.2 % offset), min, psi (MPa) |
Elongation in 2 in. or 50 mm or 4D, min,% |
|---|---|---|---|
| UNS N06600 | |||
| Cold-worked (as worked): | |||
| Rounds: | |||
| Under 1⁄2 (12.7) | 120000 (825) | 90000 (620) | 7A |
| 1⁄2 to 1 (12.7 to 25.4), incl | 110000 (760) | 85000 (585) | 10 |
| Over 1 to 21⁄2 (25.4 to 63.5), incl | 105000 (725) | 80000 (550) | 12 |
| Squares, hexagons, and rectangles: | |||
| 1⁄4 (6.4) and under | 100 95000 (690) | 80000 (550) | 5A 7 |
| Over 1⁄4 to 1⁄2 (6.4 to 12.7), excl | 95000 (655) | 70000 (480) | 7 |
| Hot worked (as worked): | |||
| Rounds: | |||
| 1⁄4 to 1⁄2 (6.4 to 12.7), incl | 95000 (655) | 45000 (310) | 20 |
| Over 1⁄2 to 3 (12.7 to 76.2), incl | 90000 (620) | 40000 (275) | 25 |
| Over 3 (76.2) | 85000 (585) | 35000 (240) | 30 |
| Squares, hexagons, and rectangles: | |||
| All sizes | 85000 (585) | 35000 (240) | 20 |
| Rings and disksB | - | - | - |
| Cold-worked (annealed) or hot-worked (annealed): | |||
| Rods and bars, all sizes | 80000 (550) | 35000 (240) | 30A |
| Rings and disksC | - | - | - |
| Forging Quality: | D | D | D |
| All sizes | |||