Werkstoff 1.4016 Stainless Steel Fasteners
430S17, BS2320, 1.4016, 430, S43000, X6CR17
1.4016 Fasteners are classified under Stainless Steel. Werkstoff 1.4016 Fasteners are internationally known as fasteners manufactured from 430 Stainless Steel.
Related Products
430 SS Bolts 430 Stainless Fasteners Type 430 Stainless Forgings 430 Stainless Nuts 430 Stainless Steel Machine Screws Type 430 Stainless Steel Threaded Rod 430 Stainless Washers 1.4016 Forgings
Werkstoff 1.4016 Stainless Steel Fasteners Properties
Werkstoff 1.4016 Stainless Steel Fasteners Common Designations for cold heading
| Type Of Steel/Alloy | Grade | Steel Number | Steel Designation | UNS | Trade Name |
|---|---|---|---|---|---|
| Ferritic | F1 | 1.4016 | X6Cr17 | S43000 | 430 |
Werkstoff 1.4016 Stainless Steel Fasteners Chemical Requirements
| Stainless steel grade | Chemical composition a (cast analysis, mass fractionin %) b | Other elements and notes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Si | Mn | P | S | Cr | Mo | Ni | Cu | N | |||
| Ferritic | F1 | 0,08 | 1,00 | 1,00 | 0,040 | 0,030 | 15,0 to 18,0 | _ f | 1,00 | - | - | j |
Werkstoff 1.4016 Stainless Steel Fasteners Mechanical Requirements
Mechanical properties (Martensitic and Ferritic Steel)
| Stainless steel grade | Property class | Tensile strength a Rmf min. MPa | Stress at 0,2 % non-proportional elongation b Rpf mm. MPa | Elongation after fracture A min. mm | ||||
|---|---|---|---|---|---|---|---|---|
| Ferritic | F1d | 45 | 450 | 250 | 0,2d | 135 to 220 | - | 128 to 209 |
| 60 | 600 | 410 | 0,2d | 180 to 285 | - | 171 to 271 | ||
Applicability of tests for fasteners with full loadability
| Stainless steel grade | Property and related test method | |||||
|---|---|---|---|---|---|---|
| Minimum tensile strength Rmr | Stress at 0,2 % non-proportional elongation Rpf | Elongation after fracture A | Minimum breaking torque M B | Hardness | ||
| Tensile test 9.1 | Wedge tensile test 9.4 | Tensile test 9.1 | Tensile test 9.1 | Torsional test 9.5 | Hardness test 9.6 | |
| F1 | d ≥ 3 mm I ≥ 2,Sd b ≥ 2d | Not relevant | d ≥ 3 mm I ≥ 2,Sd b ≥ 2d | d ≥ 3 mm I ≥ 2,Sd b ≥ 2d | No value available | Applicable |
Applicability of tests for fasteners with reduced loadability
| Stainless steel grade | Property and related test method | ||||
|---|---|---|---|---|---|
| Minimum tensile strength Rmr | Stress at 0,2 % non-proportional elongation Rpf | Elongation after fracture A | Minimum tensile load Fmr | Hardness | |
| Tensile test 9.1, 9.3 | Tensile test 9.1 | Tensile test 9.1 | Tensile test 9.2 | Hardness test 9.6 | |
| F1 | d ≥ 3 mm for all lengths, when b ≥ 3d a | d ≥ 3 mm for all lengths | Applicable | ||