Blog
BS DIN EN 1.4016 stainless Steel Forgings | UNS S43000
  • Bolting Specifications
  • Forgings
  • Werkstoff 1.4016 Stainless Steel Forgings

    • Werkstoff 1.4016 Stainless Steel Forgings

    430S17, BS2320, 1.4016, 430, S43000, X6CR17

    1.4016 Forgings are classified under Stainless Steel. Werkstoff 1.4016 Forgings are internationally known as forgings manufactured from 430 Stainless Steel.

    Related Products

    430 SS Bolts 430 Stainless Fasteners Type 430 Stainless Forgings 430 Stainless Nuts 430 Stainless Steel Machine Screws Type 430 Stainless Steel Threaded Rod 430 Stainless Washers 1.4016 Threaded Rod

    Werkstoff 1.4016 Stainless Steel Forgings Properties

    Werkstoff 1.4016 Stainless Steel Forgings Common Designations for cold heading

    Type Of Steel/Alloy Grade Steel Number Steel Designation UNS Trade Name
    Ferritic F1 1.4016 X6Cr17 S43000 430

    Werkstoff 1.4016 Stainless Steel Forgings Chemical Requirements

    Stainless steel grade Chemical composition a (cast analysis, mass fractionin %) b Other elements and notes
    C Si Mn P S Cr Mo Ni Cu N
    Ferritic F1 0,08 1,00 1,00 0,040 0,030 15,0 to 18,0 _ f 1,00 - - j

    Werkstoff 1.4016 Stainless Steel Forgings Mechanical Requirements

    Mechanical properties (Martensitic and Ferritic Steel)

    Stainless steel grade Property class Tensile strength a Rmf min. MPa Stress at 0,2 % non-proportional elongation b Rpf mm. MPa Elongation after fracture A min. mm
    Ferritic F1d 45 450 250 0,2d 135 to 220 - 128 to 209
    60 600 410 0,2d 180 to 285 - 171 to 271

    Applicability of tests for fasteners with full loadability

    Stainless steel grade Property and related test method
    Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum breaking torque M B Hardness
    Tensile test 9.1 Wedge tensile test 9.4 Tensile test 9.1 Tensile test 9.1 Torsional test 9.5 Hardness test 9.6
    F1 d ≥ 3 mm I ≥ 2,Sd b ≥ 2d Not relevant d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d No value available Applicable

    Applicability of tests for fasteners with reduced loadability

    Stainless steel grade Property and related test method
    Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum tensile load Fmr Hardness
    Tensile test 9.1, 9.3 Tensile test 9.1 Tensile test 9.1 Tensile test 9.2 Hardness test 9.6
    F1 d ≥ 3 mm for all lengths, when b ≥ 3d a d ≥ 3 mm for all lengths Applicable

    Related Keywords

  • Werkstoff 1.4016 Stud Bolts
  • Werkstoff 1.4016 Bolt
  • En 1.4016 Bolting
  • Din 1.4016 Screws
  • Bs 1.4016 Fasteners
  • Wr No.1.4016 Bolt
  • 1.4016 Nuts
  • Werkstoff 1.4016 Screws
  • Werkstoff 1.4016 Threaded Rod
  • Bs 1.4016 Screws
  • Bs 1.4016 Bolting
  • Din 1.4016 Bolt
  • Din 1.4016 Threaded Rod
  • En 1.4016 Fasteners
  • Wr No.1.4016 Nuts
  • Wr No.1.4016 Fasteners
  • 1.4016 Fasteners
  • En 1.4016 Washers
  • Wr No.1.4016 Bolting
  • Bs 1.4016 Bolt
  • 1.4016 Stud Bolts
  • Bs 1.4016 Washers
  • Bs 1.4016 Bolts
  • Din 1.4016 Studs
  • Din 1.4016 Bolting
  • 1.4016 Studs
  • 430 Ss Forged Bars
  • 430 Stainless Steel Forged Disc
  • 430 Stainless Steel Forged RingS
  • Ss 430 Forged Bars
  • Type 430 Stainless Forgings
  • 430 Stainless Steel Forgings
  • Type 430 Stainless Steel Forged RingS
  • Type 430 Stainless Forged Disc
  • Ss 430 Forged RingS
  • Type 430 Stainless Forged Bars
  • 430 Stainless Forged Disc
  • 430 Ss Rings
  • 430 Stainless Forged RingS
  • 430 Ss Forgings
  • 430 Stainless Steel Shafts
  • 430 Stainless Forged Bars
  • Ss 430 Rings
  • 430 Stainless Steel Rings
  • Ss 430 Shafts
  • Type 430 Stainless Forged RingS
  • Type 430 Stainless Rings
  • Type 430 Stainless Steel Forged Bars
  • Type 430 Stainless Steel Forgings
  • Type 430 Stainless Shafts
  • Ss 430 Forged Disc
  • Type 430 Stainless Steel Rings
  • 430 Stainless Shafts
  • 430 Stainless Steel Forged Bars
  • Type 430 Stainless Steel Forged Disc
  • Ss 430 Forgings