Blog
BS DIN EN 3.4365 Aluminium 7075 Stainless Steel Nuts | ASTM F468 UNS A97075 Specifications
  • Fasteners
  • Werkstoff 3.4365 Aluminium 7075 Stainless Steel Nuts

    • Werkstoff 3.4365 Aluminium 7075 Stainless Steel Nuts

    AIZNMGCU1.5, BSL95/L96, 3.4365, 7075, A97075

    3.4365 Fasteners like Nuts are classified under Aluminium Alloy. Werkstoff 3.4365 Fasteners are internationally known as fasteners manufactured from Aluminium 7075.

    Related Products

    Aluminium 7075 Bolts Aluminium 7075 Fasteners Aluminium 7075 Forgings Aluminium 7075 Nuts Aluminium 7075 Screws Aluminium 7075 Studs Aluminium 7075 Threaded Rod Aluminium 7075 Washers 3.4365 Screws

    Werkstoff 3.4365 Stainless Steel Nuts Properties

    Werkstoff 3.4365 Stainless Steel Nuts Chemical Requirements

    UNS Designation Number Alloy General Name AlB Cr Cu Fe, max Mn, max Si, max Ti, max Zn, max Mg Other Elements, max
    Each Total
    ASTM F468 Grade A97075 7075 Aluminum 7075 balance 0.18-0.35 1.2-2.0 0.50 0.30 0.40 0.20D 5.1-6.1 2.1-2.9 0.05 0.15

    Werkstoff 3.4365 Stainless Steel Nuts Mechanical Requirements

    Alloy Mechanical Property Marking Nominal Thread Diameter, in. HardnessA Full-Size TestsB Machined Specimen Tests
    Tensile Strength, ksi Yield Strength, min, ksiC Tensile Strength, min, ksi Yield Strength min, ksiC Elongation in 4D, min, %D
    ASTM F468 Alloy Al 7075-T73F F468Z All 80-90 HRB 61-76 50 68 56 10

    ASTM F468/F468M Tensile Stress Areas and Threads(Inch)

    Nominal Size, in. Coarse Threads-UNC Fine Threads-UNF 8 Thread Series-8UN
    Threads/ in. Stress AreaA, in.2 Threads/ in. Stress AreaA, in.2 Threads/ in. Stress AreaA, in.2
    1/4 20 0.0318 28 0.0364 . . . . . .
    5/16 18 0.0524 24 0.0580 . . . . . .
    3/18 16 0.0775 24 0.0878 . . . . . .
    7/16 14 0.1063 20 0.1187 . . . . . .
    1/2 13 0.1419 20 0.1599 . . . . . .
    9/16 12 0.1820 18 0.2030 . . . . . .
    5/8 11 0.2260 18 0.2560 . . . . . .
    3/4 10 0.3340 16 0.3730 . . . . . .
    7/8 9 0.4620 14 0.5090 . . . . . .
    1 8 0.6060 12 0.6630 . . . . . .
    11/8 7 0.7630 12 0.8560 8 0.790
    11/4 7 0.9690 12 1.0730 8 1.000
    13/8 6 1.1550 12 1.3150 8 1.233
    11/2 6 1.4050 12 1.5810 8 1.492