Werkstoff 3.1355 Aluminium 2024 Stainless Steel Forgings
ALCUMG2, 3.1355, 2024, A92024
3.1355 Forgings are classified under Aluminium Alloy. Werkstoff 3.1355 Forgings are internationally known as forgings manufactured from Aluminium 2024.
Related Products
Aluminium 2024 Bolts Aluminium 2024 Fasteners Aluminium 2024 Forgings Aluminium 2024 Nuts Aluminium 2024 Screws Aluminium 2024 Studs Aluminium 2024 Threaded Rod Aluminium 2024 Washers 3.1355 Nuts
Werkstoff 3.1355 Stainless Steel Forgings Properties
Werkstoff 3.1355 Stainless Steel Forgings Chemical Requirements
| UNS Designation Number | Alloy | General Name | AlB | Cr | Cu | Fe, max | Mn, max | Si, max | Ti, max | Zn, max | Mg | Other Elements, max | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | Total | ||||||||||||
| ASTM F468 Grade A92024 | 2024 | Aluminum 2024 | balance | 0.10 max | 3.8-4.9 | 0.50 | 0.30-0.9 | 0.50 | 0.15C | 0.25 | 1.2-1.8 | 0.05 | 0.15 |
Werkstoff 3.1355 Stainless Steel Forgings Mechanical Requirements
| Alloy | Mechanical Property Marking | Nominal Thread Diameter, in. | HardnessA | Full-Size TestsB | Machined Specimen Tests | |||
|---|---|---|---|---|---|---|---|---|
| Tensile Strength, ksi | Yield Strength, min, ksiC | Tensile Strength, min, ksi | Yield Strength min, ksiC | Elongation in 4D, min, %D | ||||
| ASTM F468 Alloy Al 2024-T4F | F468X | All | 70-85 HRB | 55-70 | 36 | 62 | 40 | 10 |
ASTM F468/F468M Tensile Stress Areas and Threads(Inch)
| Nominal Size, in. | Coarse Threads-UNC | Fine Threads-UNF | 8 Thread Series-8UN | |||
|---|---|---|---|---|---|---|
| Threads/ in. | Stress AreaA, in.2 | Threads/ in. | Stress AreaA, in.2 | Threads/ in. | Stress AreaA, in.2 | |
| 1/4 | 20 | 0.0318 | 28 | 0.0364 | . . . | . . . |
| 5/16 | 18 | 0.0524 | 24 | 0.0580 | . . . | . . . |
| 3/18 | 16 | 0.0775 | 24 | 0.0878 | . . . | . . . |
| 7/16 | 14 | 0.1063 | 20 | 0.1187 | . . . | . . . |
| 1/2 | 13 | 0.1419 | 20 | 0.1599 | . . . | . . . |
| 9/16 | 12 | 0.1820 | 18 | 0.2030 | . . . | . . . |
| 5/8 | 11 | 0.2260 | 18 | 0.2560 | . . . | . . . |
| 3/4 | 10 | 0.3340 | 16 | 0.3730 | . . . | . . . |
| 7/8 | 9 | 0.4620 | 14 | 0.5090 | . . . | . . . |
| 1 | 8 | 0.6060 | 12 | 0.6630 | . . . | . . . |
| 11/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
| 11/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
| 13/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
| 11/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.492 |