Werkstoff 3.1355 Aluminium 2024 Stainless Steel Bolts
ALCUMG2, 3.1355, 2024, A92024
3.1355 Fasteners like Bolts are classified under Aluminium Alloy. Werkstoff 3.1355 Fasteners are internationally known as fasteners manufactured from Aluminium 2024.
Related Products
Aluminium 2024 Bolts Aluminium 2024 Fasteners Aluminium 2024 Forgings Aluminium 2024 Nuts Aluminium 2024 Screws Aluminium 2024 Studs Aluminium 2024 Threaded Rod Aluminium 2024 Washers 3.1355 Fasteners
Werkstoff 3.1355 Stainless Steel Bolts Properties
Werkstoff 3.1355 Stainless Steel Bolts Chemical Requirements
| UNS Designation Number | Alloy | General Name | AlB | Cr | Cu | Fe, max | Mn, max | Si, max | Ti, max | Zn, max | Mg | Other Elements, max | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | Total | ||||||||||||
| ASTM F468 Grade A92024 | 2024 | Aluminum 2024 | balance | 0.10 max | 3.8-4.9 | 0.50 | 0.30-0.9 | 0.50 | 0.15C | 0.25 | 1.2-1.8 | 0.05 | 0.15 |
Werkstoff 3.1355 Stainless Steel Bolts Mechanical Requirements
| Alloy | Mechanical Property Marking | Nominal Thread Diameter, in. | HardnessA | Full-Size TestsB | Machined Specimen Tests | |||
|---|---|---|---|---|---|---|---|---|
| Tensile Strength, ksi | Yield Strength, min, ksiC | Tensile Strength, min, ksi | Yield Strength min, ksiC | Elongation in 4D, min, %D | ||||
| ASTM F468 Alloy Al 2024-T4F | F468X | All | 70-85 HRB | 55-70 | 36 | 62 | 40 | 10 |
ASTM F468/F468M Tensile Stress Areas and Threads(Inch)
| Nominal Size, in. | Coarse Threads-UNC | Fine Threads-UNF | 8 Thread Series-8UN | |||
|---|---|---|---|---|---|---|
| Threads/ in. | Stress AreaA, in.2 | Threads/ in. | Stress AreaA, in.2 | Threads/ in. | Stress AreaA, in.2 | |
| 1/4 | 20 | 0.0318 | 28 | 0.0364 | . . . | . . . |
| 5/16 | 18 | 0.0524 | 24 | 0.0580 | . . . | . . . |
| 3/18 | 16 | 0.0775 | 24 | 0.0878 | . . . | . . . |
| 7/16 | 14 | 0.1063 | 20 | 0.1187 | . . . | . . . |
| 1/2 | 13 | 0.1419 | 20 | 0.1599 | . . . | . . . |
| 9/16 | 12 | 0.1820 | 18 | 0.2030 | . . . | . . . |
| 5/8 | 11 | 0.2260 | 18 | 0.2560 | . . . | . . . |
| 3/4 | 10 | 0.3340 | 16 | 0.3730 | . . . | . . . |
| 7/8 | 9 | 0.4620 | 14 | 0.5090 | . . . | . . . |
| 1 | 8 | 0.6060 | 12 | 0.6630 | . . . | . . . |
| 11/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
| 11/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
| 13/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
| 11/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.492 |