304N Stainless Steel Hex Nuts
1.4311, 304LN, S30451, X2CRNIN18-10
304N Stainless Steel Nuts are austenitic stainless steel nuts manufactured from alloy containing chromium, nickel with addition of nitrogen with restricted carbon content. Stainless Steel 304N Nuts are used for low temperature service and highly corrosive environments. TorqBolt is an eminent 304 Stainless Steel Nut supplier in India.
Related Products
Type 304N Stainless Bolts 304N Stainless Steel Bolts And Nuts 304N Stainless Forgings SS 304N Nuts Type 304N Stainless Steel Screws 304N Stainless Threaded Rod 304N Stainless Steel Flat Washers Astm A193 Grade B8N Class 2 Bolts Astm A193 Grade B8Na Bolts Astm A194 Grade 8N Nuts Astm A194 Grade 8Na Nuts Astm A320 Grade B8Ln Class 1 Bolts Astm A320 Grade B8Lna Bolts
304N Stainless Steel Hex Nuts Properties
304N Stainless Steel Hex Nuts Chemical Composition
Austenitic Steels
| Grade | Description and UNS Designatio | Classes | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | CbF | Ti | V | N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASTM A193 Grade B8N, B8NA | 304N, S30451 | 1A, 1B, 1D, 2 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 | . . . | . . . | . . . | . . . | . . . | 0.10-0.16 |
| Product Analysis VariationB | 0.01 | 0.04 | 0.010 | 0.005 | 0.05 | 0.20 | 0.15 | . . . | . . . | . . . | . . . | . . . | 0.01 |
304N Stainless Steel Hex Nuts Mechanical Requirements
Austenitic Steels (Inch)
| Grade | Diameter, in. |
Heat TreatmentB | Tensile Strength, min, ksi |
Yield Strength, min, 0.2 % offset, ks |
Elongation in 4 D,min | Reduction of Area,min | Hardness, max |
|---|---|---|---|---|---|---|---|
| ASTM A193 Grade B8NA Class 1A | All diameters | carbide solution treated in the finished condition | 75 | 30 | 30 | 50 | 192 HBW or 90 HRB |
| ASTM A193 Grade B8N Classes 1B and 1D | All diameters | carbide solution treated | 80 | 35 | 30 | 40 | 223 HBW or 96 HRBC |
Austenitic Steels (Metric)
| Grade Class , mm |
Diameter | Heat TreatmentB | Tensile Strength, min,MPa |
Yield Strength, min, 0.2 % offset, MPa |
Elongation in 4 D,min % | Reduction of Area,min % | Hardness, max |
|---|---|---|---|---|---|---|---|
| ASTM A193M Grade B8NA Class 1A | All diameters | carbide solution treated in the finished condition | 515 | 205 | 30 | 50 | 192 HBW or 90 HRB |
| ASTM A193M Grade B8N Classes 1B and 1D | All diameters | carbide solution treated | 550 | 240 | 30 | 40 | 223 HBW or 96 HRBC |