BS DIN EN 1.4021 stainless Steel Nuts | UNS S42000

Werkstoff 1.4021 Stainless Steel Nuts

420S37, BS2303, 1.4021, 420J1, S42000, X20CR13

1.4021 Fasteners like Nuts are classified under Stainless Steel. Werkstoff 1.4021 Fasteners are internationally known as fasteners manufactured from 420 Stainless Steel.

Related Products

420 SS Bolts 420 SS Fasteners 420 SS Forgings 420 Stainless Steel Nuts SS 420 Screws 420 SS Threaded Rod 420 Stainless Washers 1.4021 Forgings

Werkstoff 1.4021 Stainless Steel Nuts Properties

Werkstoff 1.4021 Stainless Steel Nuts Common Designations for cold heading

Type Of Steel/Alloy Grade Steel Number Steel Designation UNS Trade Name
General purpose martensitic C1 1.4021 X20Cr13 S42000 420

Werkstoff 1.4021 Stainless Steel Nuts Chemical Requirements

Stainless steel grade Chemical composition a (cast analysis, mass fractionin %) b Other elements and notes
C Si Mn P S Cr Mo Ni Cu N
Martensitic C1 0,09 to 0,15 1,00 1,00 0,050 0,030 11,5 to 14,0 - 1,00 - - i

Werkstoff 1.4021 Stainless Steel Nuts Mechanical Requirements

Mechanical properties (Martensitic and Ferritic Steel)

Stainless steel grade Property class Tensile strength a Rmr min. MPa Stress at 0,2 % non-proportional elongation b Rpr mm. MPa Elongation after fracture A min. mm Hardness min. to max.
HV HRC HBW
Martensitic C1 50 500 250 0,2d 155 to 220 - 147 to 209
70 700 410 0,2d 220 to 330 20 to 34 209 to 314
110 c 1100 820 0,2d 350 to 440 36 to 45 -

Applicability of tests for fasteners with full loadability

Stainless steel grade Property and related test method
Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum breaking torque M B Hardness
Tensile test 9.1 Wedge tensile test 9.4 Tensile test 9.1 Tensile test 9.1 Torsional test 9.5 Hardness test 9.6
C1 d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d No value available Applicable

Applicability of tests for fasteners with reduced loadability

Stainless steel grade Property and related test method
Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum tensile load Fmr Hardness
Tensile test 9.1, 9.3 Tensile test 9.1 Tensile test 9.1 Tensile test 9.2 Hardness test 9.6
C1 C3 C4 d ≥ 3 mm for all lengths, when b ≥ 3d a d ≥ 3 mm for all lengths Applicable

Related Keywords

  • Bs 1.4021 Washers
  • 1.4021 Screws
  • Wr No.1.4021 Screws
  • En 1.4021 Washers
  • En 1.4021 Studs
  • Werkstoff 1.4021 Nuts
  • En 1.4021 Bolt
  • 1.4021 Nuts
  • En 1.4021 Stud Bolts
  • Werkstoff 1.4021 Threaded Rod
  • En 1.4021 Nuts
  • Din 1.4021 Screws
  • Din 1.4021 Nuts
  • Bs 1.4021 Nuts
  • Wr No.1.4021 Bolt
  • Wr No.1.4021 Bolts
  • Wr No.1.4021 Stud Bolts
  • 1.4021 Stud Bolts
  • Bs 1.4021 Bolts
  • Werkstoff 1.4021 Bolt
  • Wr No.1.4021 Washers
  • Din 1.4021 Bolting
  • Wr No.1.4021 Fasteners
  • Werkstoff 1.4021 Studs
  • 1.4021 Bolt
  • Werkstoff 1.4021 Screws
  • En 1.4021 Threaded Rod
  • Din 1.4021 Stud Bolts
  • Ss 420 Nut
  • 420 Stainless Nuts
  • Type 420 Stainless Nut
  • Ss 420 Hex Nut
  • 420 Stainless Steel Hex Nuts
  • 420 Ss Heavy hex Nut
  • Ss 420 Nuts
  • Type 420 Stainless Hex Nuts
  • 420 Stainless Nut
  • Type 420 Stainless Steel Hex Nut
  • Type 420 Stainless Steel Nut
  • Type 420 Stainless Steel Hex Nuts
  • 420 Ss Hex Nut
  • Ss 420 Lock Nut
  • 420 Stainless Heavy hex Nut
  • Type 420 Stainless Steel Nuts
  • Type 420 Stainless Hex Nut
  • Ss 420 Hex Nuts
  • 420 Stainless Hex Nuts
  • Type 420 Stainless Steel Lock Nut
  • 420 Stainless Steel Hex Nut
  • 420 Stainless Lock Nut
  • 420 Stainless Steel Lock Nut
  • 420 Stainless Steel Nuts
  • 420 Ss Nuts
  • 420 Ss Lock Nut
  • 420 Ss Nut
  • Type 420 Stainless Steel Heavy hex Nut
  • Type 420 Stainless Nuts
  • Type 420 Stainless Heavy hex Nut
  • Ss 420 Heavy hex Nut
  • 420 Stainless Steel Nut
  • 420 Stainless Steel Heavy hex Nut
  • 420 Stainless Hex Nut
  • 420 Ss Hex Nuts