BS DIN EN 1.4016 stainless Steel Screws | UNS S43000

Werkstoff 1.4016 Stainless Steel Screws

430S17, BS2320, 1.4016, 430, S43000, X6CR17

1.4016 Fasteners like Screws are classified under Stainless Steel. Werkstoff 1.4016 Fasteners are internationally known as fasteners manufactured from 430 Stainless Steel.

Related Products

430 SS Bolts 430 Stainless Fasteners Type 430 Stainless Forgings 430 Stainless Nuts 430 Stainless Steel Machine Screws Type 430 Stainless Steel Threaded Rod 430 Stainless Washers 1.4016 Nuts

Werkstoff 1.4016 Stainless Steel Screws Properties

Werkstoff 1.4016 Stainless Steel Screws Common Designations for cold heading

Type Of Steel/Alloy	Grade	Steel Number	Steel Designation	UNS	Trade Name
Ferritic	F1	1.4016	X6Cr17	S43000	430

Werkstoff 1.4016 Stainless Steel Screws Chemical Requirements

Stainless steel grade		Chemical composition ^a (cast analysis, mass fractionin %) ^b										Other elements and notes
Stainless steel grade		C	Si	Mn	P	S	Cr	Mo	Ni	Cu	N	Other elements and notes
Ferritic	F1	0,08	1,00	1,00	0,040	0,030	15,0 to 18,0	_ ^f	1,00	-	-	^j

Werkstoff 1.4016 Stainless Steel Screws Mechanical Requirements

Mechanical properties (Martensitic and Ferritic Steel)

Stainless steel grade		Property class	Tensile strength ^a R_mf min. MPa	Stress at 0,2 % non-proportional elongation ^b R_pf mm. MPa	Elongation after fracture A min. mm
Ferritic	F1^d	45	450	250	0,2d	135 to 220	-	128 to 209
Ferritic	F1^d	60	600	410	0,2d	180 to 285	-	171 to 271

Applicability of tests for fasteners with full loadability

Stainless steel grade	Property and related test method
	Minimum tensile strength Rmr		Stress at 0,2 % non-proportional elongation Rpf	Elongation after fracture A	Minimum breaking torque M B	Hardness
	Tensile test 9.1	Wedge tensile test 9.4	Tensile test 9.1	Tensile test 9.1	Torsional test 9.5	Hardness test 9.6
F1	d ≥ 3 mm I ≥ 2,Sd b ≥ 2d	Not relevant	d ≥ 3 mm I ≥ 2,Sd b ≥ 2d	d ≥ 3 mm I ≥ 2,Sd b ≥ 2d	No value available	Applicable

Applicability of tests for fasteners with reduced loadability

Stainless steel grade	Property and related test method
	Minimum tensile strength R_mr	Stress at 0,2 % non-proportional elongation R_pf	Elongation after fracture A	Minimum tensile load F_mr	Hardness
	Tensile test 9.1, 9.3	Tensile test 9.1	Tensile test 9.1	Tensile test 9.2	Hardness test 9.6
F1	d ≥ 3 mm for all lengths, when b ≥ 3d ^a			d ≥ 3 mm for all lengths	Applicable

Related Keywords

Werkstoff 1.4016 Stud Bolts

Werkstoff 1.4016 Bolt

En 1.4016 Bolting

Din 1.4016 Screws

Bs 1.4016 Fasteners

Wr No.1.4016 Bolt

1.4016 Nuts

Werkstoff 1.4016 Screws

Werkstoff 1.4016 Threaded Rod

Bs 1.4016 Screws

Bs 1.4016 Bolting

Din 1.4016 Bolt

Din 1.4016 Threaded Rod

En 1.4016 Fasteners

Wr No.1.4016 Nuts

Wr No.1.4016 Fasteners

1.4016 Fasteners

En 1.4016 Washers

Wr No.1.4016 Bolting

Bs 1.4016 Bolt

1.4016 Stud Bolts

Bs 1.4016 Washers

Bs 1.4016 Bolts

Din 1.4016 Studs

Din 1.4016 Bolting

1.4016 Studs

Ss 430 Self Drilling Screws

Type 430 Stainless Steel Flat Head Screws

Type 430 Stainless Pan Head Screws

Ss 430 Set Screw

430 Stainless Metric Screws

430 Ss Hex Cap Screws

430 Ss Set Screws

Type 430 Stainless Steel Machine Screws

430 Stainless Steel Cap Screws

Type 430 Stainless Steel Screws

430 Ss Screws

Type 430 Stainless Steel Set Screw

430 Stainless Steel Socket Head Cap Screws

Type 430 Stainless Steel Metric Screws

Type 430 Stainless Self Tapping Screws

430 Stainless Steel Wood Screws

430 Ss Grub Screws

Ss 430 Set Screws

430 Stainless Cap Screws

Type 430 Stainless Self Drilling Screws

430 Stainless Steel Flat Head Screws

Ss 430 Self Tapping Screws

430 Ss Self Drilling Screws

430 Ss Wood Screws

Type 430 Stainless Steel Self Tapping Screws

430 Stainless Steel Metric Screws

Type 430 Stainless Socket Head Cap Screws

Type 430 Stainless Steel Socket Head Cap Screws

Type 430 Stainless Steel Self Drilling Screws