Alloy 230 Fasteners
B564, N06230
Alloy 230 Fastener Properties
Alloy 230 Fastener Chemical Requirements
| UNS | Element | Composition, % | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cu | Fe | Mn | C | Si | S | Cr | Al | Ti | Nb + Ta | Mo | P | W | Co | V | N | B | La | Al + Ta | Ni + Mo | Nb | Ta | Zr | Ce | Y | Mg | ||
| UNS N06230 | Ni Cr-W Mo Alloy | balanceB | ... | 3.0 | 0.30-1.00 | 0.05-0.15 | 0.25-0.75 | 0.015 | 20.0-24.0 | 0.50 | ... | ... | 1.0-3.0 | 0.030 | 13.0-15.0 | 5.0 | ... | ... | 0.015 | 0.005-0.050 | ... | ... | ... | ... | ... | ... | ... | ... |
Alloy 230 Fastener Mechanical Requirements
| Material and Condition | Maximum Section Thickness, in. (mm) | Tensile Strength, min, ksi (MPa) | Yield Strength, 0.2 % Offset, min, ksi (MPa) | Elongation in 2 in. or 50 mm or 4D, min, % |
|---|---|---|---|---|
| Nickel-chromium-Molybdenum-tungsten alloy UNS N06230, solution annealedC | ... | 110 (758) | 45 (310) | 40 |