Geomet 720 Coated Fasteners
GEOMET® 720 is applied to protect fasteners and many types of metallic parts from corrosion and is used in many industries. It can be combined with PLUS® topcoats to provide a very broad range of friction coefficients. It is the reference
zinc flake coating in Asia
- Thin dry-film, non-electrolytic
- Water-based chemistry
- Passivated zinc and aluminum flakes in a binder, patented chemistry
- Metallic silver appearance
GEOMET® 720 can be applied by Dip-Spin, Spray, Dip-Drain-Spin using bulk or rack
- Aqueous dispersion
- Complies with REACh Complies with the 2000/53/CE and 2002/95/CE directives
- The coefficient of friction can be adjusted to targeted values ranging from
- 0.06 to 0.20 (ISO 16047) with NOF METAL COATING GROUP’s selected topcoats
- Can be used with or without topcoat
- No hydrogen embrittlement
- Excellent assembly and multi-tightening behavior (with lubricated topcoat)
- Performance maintained at elevated temperatures (up to 300°C)
- Paintable coating
- Electrical conductivity for most application processes
- Bimetallic compatibility with aluminum
| Coating Weight |
Salt Spray Test (ISO 9227 / ASTM B117) |
| 24 g/m2 |
> 1000 hours without red rust |
| > 24 g/m2 + topcoat |
> 1500 hours without red rust |
- Results may vary depending on substrate, geometry of parts and type of application processes
|
- HONDA
- HYUNDAI - KIA
- NISSAN
- TOYOTA