Ferralium 255 Nuts, Hex Nut, Weld Nut, Dome Nut, Wing Nut, Lock Nut, DIN 934/936/982/985, ISO 4032/4033/4035, ASME B18.2.2, B126.96.36.199M, Inch, Metric Threads
Ferralium 255 Nuts are dual phase austenitic-ferritic duplex nuts manufactured from alloy containing chromium, nickel and molybdenum with restricted carbon content and minimum PREN 42. Alloy 32520 Nuts have high strength, resistance to pitting, stress corrosion cracking, erosion and corrosion fatigue, crevice corrosion resistant. TorqBolt is an eminent Ferralium 255 nut supplier in India.
ASTM A182 / A479 / A276 F61
ASME SA182 / SA479 / SA276 F61
– Finish: Pickling and Passivation
– Marking: TorqBolt S32520
– Type: Cold Forged, Hot Forged, Bar Stock Machined
|Dimensions||DIN 934/936/982/985, ISO 4032/4033/4035, ASME B18.2.2, B188.8.131.52M|
|Threads||Unless otherwise specified, the threads shall be tapped horizontally or vertically at the option of TorqBolt|
|Threads Configuration||ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
Ferralium 255 Nuts Specification
S32520 is also known as UNS S32550 or Bs En 1.4507. It is a high chromium nickel super duplex stainless steel. It has very good resistance against corrosion and pitting against corrosives such as sulphuric acid. It is advisable not to use this type of steel in high temperature applications where tensile strength of a material is 770 Mpa and yield strength is 550 MPa. They are used in oil refining, fertilizer, papermaking, petroleum, high temperature heat exchangers. etc.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Bright Finish Ferralium 255 Hex Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Hexagonal Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Ferralium is a registered trademark of Langley Alloys Limited.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.