Nimonic 75 Washers, Flat Washers, Spring Washers, Lock Washers, Square Washers, DIN 125/127, ISO 7089/7090, ASME B18.22.1

Nimonic 75 Washers, Flat Washers, Spring Washers, Lock Washers, Square Washers, DIN 125/127, ISO 7089/7090, ASME B18.22.1

£0.03

£0.03-£287

Write A Review | Questions & Answers

Nimonic 75 Washers are low creep superalloy washers manufactured from alloy containing more than 50% nickel , 20% chromium with addition of titanium and aluminium. Nimonic Alloy 75 Washers have an ability to withstand very high temperatures. TorqBolt is an eminent Nimonic 75 washer supplier in India.

DIN 17744

– Finish: Pickling and Passivation

– Compatible Fasteners: Nimonic 75 Screw | Nimonic 75 Bolts

– Marking: TorqBolt N06075

– Type: Cold Formed, Hot Formed, Bar Stock Machined

000

Product Features

DimensionsDIN 125/127, ISO 7089/7090, ASME B18.22.1
Melt OriginIndia
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

Nimonic 75 Washers Specification

NIMONIC 75 is a nickel chromium alloy with additions of carbon and titanium. Also Known as Alloy 75 this alloy is resistant to oxidation at elevated temperatures with a medium strength. Nimonic Alloy 75A can be provided in solution annealed and precipitation hardened condition.

Nimonic 75 Properties

Chemical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

ADDITIONAL INFORMATION

TorqBolt is a well known stockist of Pitch Dia Nimonic 75 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

Nimonic is a registered trademark of Special Metals Corporation.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.