Nickel 200 Fasteners, Alloy 200 Hex Bolt, Nut, Stud, Screw, Washer
Nickel 200 Fasteners are fasteners manufactured from commercially pure wrought nickel which is ferromagnetic in nature. Nickel 200 Fasteners have highly ductile mechanical properties across a wide temperature range with high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. TorqBolt is an eminent Nickel 200 fastener supplier in India.
ASTM B160 Alloy 200 | ASTM B160 Alloy 200
ASME SB160 Alloy 200 | ASME SB160 Alloy 200
EN 10088; DIN 17740 | EN 10088; DIN 17740
– Finish: Pickling and Passivation
– Marking: TorqBolt N02200
– Type: Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling
|Dimensions||DIN 931, 933, 934, 7991, 976, ASME B18.2.1, B18.3|
|Threads||Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically at the option of TorqBolt|
|Threads Configuration||ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads|
|Melt Origin||East Europe/South America/Korea/Japan|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
Nickel 200 Fasteners Specification
Nickel 200 is commercially unadulterated (99.6%) fashioned Nickel with best of the mechanical properties and resistance to a range of corrosive media. It has Good thermal, electrical and magnetostrictive properties. Used for variety of processing equipment. Especially to retain product purity in handling foods, Synthetic fibres and alkalies.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Pitch Dia Nickel 200 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.