Monel k-500 Washers, Flat Washers, Spring Washers, Lock Washers, Square Washers, DIN 125/127, ISO 7089/7090, ASME B18.22.1
Monel k-500 Washers are precipitation hardening washers manufactured from copper nickel alloy with addition of titanium and aluminium. Monel k-500 Washers have high tensile strength with better corrosion resistance. TorqBolt is an eminent Monel K-500 washer supplier in India.
ASTM B127 TYPE 5500
ASME SB127 TYPE 5500
– Finish: Pickling and Passivation
– Marking: TorqBolt N05500
– Type: Cold Formed, Hot Formed, Bar Stock Machined, Bar Stock Milling
|Dimensions||DIN 125/127, ISO 7089/7090, ASME B18.22.1|
|Melt Origin||East Europe/South America/Korea/Japan|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
Monel k-500 Washers Specification
Monel Alloy K-500 is a precipitation- hardened Nickel-copper alloy that merges the corrosion resistance of Monel alloy 400 with higher strength and hardness. It possesses low permeability and is non-magnetic at temperatures as low as -150 degrees F (-101 Degrees C). Widely used for various industry applications such as pump shafts, oil-well tools and instruments, doctor blades and scrappers, spring valve trim, washers and marine propeller shafts etc.
Add a Review
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Pitch Dia Monel k-500 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Monel is a registered trademark of Special Metals Corporation.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.