Monel k-500 Fasteners, ASTM F467W/F468W Alloy 500 Hex Bolt, Nut, Stud, Screw, Washer
Monel k-500 Fasteners are precipitation hardening fasteners manufactured from copper nickel alloy with addition of titanium and aluminium. Monel k-500 Fasteners have high tensile strength with better corrosion resistance. TorqBolt is an eminent Monel K-500 fastener supplier in India.
ASTM F468, B564, B164 Alloy k-500 | ASTM F467, B564, B164 Alloy k-500
ASME SF468 / SB564, B164 Alloy k-500 | ASME SF468 / SB564, B164 Alloy k-500
DIN 17743 | B564 DIN 17743
– Finish: Pickling and Passivation
– Marking: TorqBolt N05500
– Type: Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling
|Dimensions||DIN 931, 933, 934, 7991, 976, ASME B18.2.1, B18.3|
|Threads||Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically at the option of TorqBolt|
|Threads Configuration||ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads|
|Melt Origin||East Europe/South America/Korea/Japan|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
Monel Alloy k-500 Fasteners Specification
Monel Alloy K-500 is a precipitation- hardened Nickel-copper alloy that merges the corrosion resistance of Monel alloy 400 with higher strength and hardness. It possesses low permeability and is non-magnetic at temperatures as low as -150 degrees F (-101 Degrees C). Widely used for various industry applications such as pump shafts, oil-well tools and instruments, doctor blades and scrappers, spring valve trim, fasteners and marine propeller shafts etc.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Pitch Dia Monel k-500 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Monel is a registered trademark of Special Metals Corporation.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.