Monel 400 Threaded Rod, Stud Bolt, Studs, Double/Part/Single End Threaded, DIN 975/976, DIN 2510/939/940, ASME B18.2.1, B18.31.3, B16.5, Inch, Metric Threads
Monel 400 Threaded Rod are precipitation hardening threaded rod manufactured from copper nickel alloy with addition of titanium and aluminium. Monel 400 Threaded Rod have high tensile strength with better corrosion resistance. TorqBolt is an eminent Monel 400 threaded rod supplier in India.
ASTM F468, B564 Alloy 400
ASME SF468 / SB564 Alloy 400
– Finish: Pickling and Passivation
– Marking: TorqBolt N04400
– Type: Cold Drawn, Hot Drawn, Bar Stock Machined
|Dimensions||DIN 975/976, ASME B18.2.1, B18.31.3, B16.5|
|Threads||Unless otherwise specified, the threads shall be rolled or cut at the option of TorqBolt|
|Threads Configuration||ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads|
|Melt Origin||East Europe/South America/Korea/Japan|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
Monel 400 Studs Specification
Monel Alloy 400 is a Nickel-copper alloy that has high strength and extreme corrosion resistance in a range of media, including sea water, hydrofluoric acid, sulphuric acid, sulphuric acid and alkalis and hence it has variety of industrial applications. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, threaded-rod and heat exchangers.
Add a Review
TorqBolt is a well known stockist of Pitch Dia Monel 400 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Monel is a registered trademark of Special Metals Corporation.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.