Inconel 718 Springs, ASTM B637, Wire Springs, Flat Springs, Retaining Rings

Inconel 718 Springs, ASTM B637, Wire Springs, Flat Springs, Retaining Rings

£4.50

£4.5-£1436

Write A Review | Questions & Answers

Inconel 718 Springs are age hardened springs with good corrosion resistance. Inconel 718 Springs are good for use in elevated temperature applications with no magnetism. Torqbolt is a prominent Inconel 718 Spring supplier in India.

– Finish: Pickling and Passivation

– Compatible Fasteners: inconel 718 Spring Washers | inconel 718 Flat Washers

– Marking: TorqBolt N07718

– Type: Cold Formed, Hot Formed, Bar Stock Machined, Bar Stock Milling

SKU: 100101458 Categories: , Tags: , ,
000

Product Features

DimensionsTailor Made as per Clients requirements
EndsSquare Ends, Grounded Ends
Melt OriginEast Europe/South America/Korea/Japan
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

Inconel 718 Springs Specification

Alloy 718 NACE is a chromium nickel alloy with high strength and corrosion resistance. Alloy 718 can be provided in both solution annealed condition and age hardened condition. Ace Alloy 718 confirms all requirements of the NACE MR0175, MR0103 and ISO 15156-3 specifications for use in oil tools used for sour service.

Inconel 718 Properties

Chemical Mechanical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

ADDITIONAL INFORMATION

TorqBolt is a well known stockist of Spring Tempered Inconel 718 Wires from ¼ Inch to 4 inch & 6mm to 100mm in 50 Kg, 100 Kg & 500 Kg Coils. All Spring Tempered WIres are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

Inconel is a registered trademark of Special Metals Corporation.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.