Inconel 625 Washers, Flat Washers, Spring Washers, Lock Washers, Square Washers, DIN 125/127, ISO 7089/7090, ASME B18.22.1
Inconel 625 Washers are washers manufactured from alloy containing nickel as base element containing chromium and Molybdenum with additions of aluminium and titanium. Inconel 625 Washers have possesses high strength properties and resistance to elevated temperatures. TorqBolt is an eminent Inconel 625 washer supplier in India.
ASTM B443 Alloy 625
ASME SB443 Alloy 625
– Finish: Pickling and Passivation
– Marking: TorqBolt N06625
– Type: Cold Formed, Hot Formed, Bar Stock Machined, Bar Stock Milling
|Dimensions||DIN 125/127, ISO 7089/7090, ASME B18.22.1|
|Melt Origin||East Europe/South America/Korea/Japan|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
Inconel 625 Washers Specification
Inconel Alloy 625 is a Nickel chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloyÕs matrix and which provides better strength without a strengthening heat treatment. Alloy resists a wide range of extreme corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors.
Add a Review
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Pitch Dia Inconel 625 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Inconel is a registered trademark of Special Metals Corporation.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.