Inconel 603 Washers, Flat Washers, Spring Washers, Lock Washers, Square Washers, DIN 125/127, ISO 7089/7090, ASME B18.22.1
Inconel 603 Washers are washers manufactured from alloy containing nickel as base element with additions of chromium. Inconel 603 Washers have good resistance to aqueous corrosion, has high mechanical strength, and is readily formed and machined. TorqBolt is an eminent Inconel 603 washer supplier in India.
– Finish: Pickling and Passivation
– Marking: TorqBolt N06603
– Type: Cold Formed, Hot Formed, Bar Stock Machined, Bar Stock Milling
|Dimensions||DIN 125/127, ISO 7089/7090, ASME B18.22.1|
|Melt Origin||East Europe/South America/Korea/Japan|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
Inconel 603 Washers Specification
It covers Inconel Forging. These are classified into different grades according to chemical composition. A chemical analysis shall be employed employed on each alloy in order to determine its chemical composition. Grain size and mechanical properties like tensile strength, yield strength and elongation shall be measured. A tension test and ultrasonic tests shall be done for each specimen. values given in Inch-Pound shall be regarded as standard. The values given in paranthesis are mathematical conversions to SI units that are provided for information only.
Add a Review
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Pitch Dia Inconel 603 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Inconel is a registered trademark of Special Metals Corporation.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.