Inconel 600 Screws
B166 N06600, F468 N06600, 2.4816, NCF 600, NICR15FE, N06600
Inconel 600 Screws are fasteners manufactured from alloy containing nickel as base element with additions of chromium. Inconel 600 Screws have good resistance to aqueous corrosion, has high mechanical strength, and is readily formed and machined. TorqBolt is an eminent Inconel 600 fastener supplier in India.
Related Products
Alloy 600 Bolts Astm B166 Alloy 600 Fasteners Astm B166 Alloy 600 Forgings Inconel 600 Nuts Inconel 600 Hex Cap Screws Inconel 600 Springs Inconel 600 Turbo Studs Alloy 600 Washers 2.4816 Fasteners
Inconel 600 Cap Screw Properties
Inconel 600 Chemical Requirements
| Composition Limits, % | Element | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS | Ni | Cr | S | Mo | Fe | Mn | Al | C | Cu | Si | S | Ti | P | Zr | Y | B | N | Nb | Ce | W |
| UNS N06600 | 72.0 min | 14.0-17.0 | ... | ... | 6.0-10.0 | 1.0 max | ... | 0.15 max | 0.5 max | 0.5 max | 0.015 max | ... | ... | ... | ... | ... | ... | ... | ... | ... |
Inconel 600 Mechanical Requirements
| Condition and Diameter or Distance Between Parallel Surfaces, in. (mm) |
Tensile Strength, min, psi (MPa) |
Yield Strength (0.2 % offset), min, psi (MPa) |
Elongation in 2 in. or 50 mm or 4D, min,% |
|---|---|---|---|
| UNS N06600 | |||
| Cold-worked (as worked): | |||
| Rounds: | |||
| Under 1⁄2 (12.7) | 120000 (825) | 90000 (620) | 7A |
| 1⁄2 to 1 (12.7 to 25.4), incl | 110000 (760) | 85000 (585) | 10 |
| Over 1 to 21⁄2 (25.4 to 63.5), incl | 105000 (725) | 80000 (550) | 12 |
| Squares, hexagons, and rectangles: | |||
| 1⁄4 (6.4) and under | 100 95000 (690) | 80000 (550) | 5A 7 |
| Over 1⁄4 to 1⁄2 (6.4 to 12.7), excl | 95000 (655) | 70000 (480) | 7 |
| Hot worked (as worked): | |||
| Rounds: | |||
| 1⁄4 to 1⁄2 (6.4 to 12.7), incl | 95000 (655) | 45000 (310) | 20 |
| Over 1⁄2 to 3 (12.7 to 76.2), incl | 90000 (620) | 40000 (275) | 25 |
| Over 3 (76.2) | 85000 (585) | 35000 (240) | 30 |
| Squares, hexagons, and rectangles: | |||
| All sizes | 85000 (585) | 35000 (240) | 20 |
| Rings and disksB | - | - | - |
| Cold-worked (annealed) or hot-worked (annealed): | |||
| Rods and bars, all sizes | 80000 (550) | 35000 (240) | 30A |
| Rings and disksC | - | - | - |
| Forging Quality: | D | D | D |
| All sizes | |||