Incoloy 800H Forgings
B564, B408 N08810, 1.4958, NCF 800 H, N08810, X8NICRALTI32-21
Incoloy 800H Forgings are components manufactured from chromium nickel alloy with additions of aluminium, titanium and high carbon content. Incoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures. TorqBolt is an eminent Incoloy 800h forged ring supplier in India.
Related Products
Incoloy 800H Bolts Incoloy 800H Fasteners Alloy 800H Rings Incoloy 800H Hex Nuts Inconel 800H Cap Screws Alloy 800H Threaded Rod Incoloy 800H Washers 1.4958 Screws
Incoloy 800h Properties
Incoloy 800H Chemical Requirements
| UNS | Element | Composition, % | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cu | Fe | Mn | C | Si | S | Cr | Al | Ti | Nb + Ta | Mo | P | W | Co | V | N | B | La | Al + Ta | Ni + Mo | Nb | Ta | Zr | Ce | Y | Mg | ||
| UNS N08810 | Ni-Fe-Cr Alloy | 30.0-35.0 | 0.75 | 39.5B min | 1.5 | 0.05-0.10 | 1.0 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... |
Incoloy 800H Mechanical Requirements
| Material and Condition | Maximum Section Thickness, in. (mm) | Tensile Strength, min, ksi (MPa) | Yield Strength, 0.2 % Offset, min, ksi (MPa) | Elongation in 2 in. or 50 mm or 4D, min, % |
|---|---|---|---|---|
| UNS N08810 and UNS N08811, annealed | ... | 65 (448) | 25 (172) | 30 |