Werkstoff 1.4959 Fasteners, incoloy 800HT, Hex Bolt, Nut, Stud, Screw, Washer, DIN 931, 933, 934, 7991, 976, Inch, Metric Threads

Werkstoff 1.4959 Fasteners, incoloy 800HT, Hex Bolt, Nut, Stud, Screw, Washer, DIN 931, 933, 934, 7991, 976, Inch, Metric Threads

£0.40

£0.4-£870

Write A Review | Questions & Answers

1.4959 Fasteners like Bolts, Nuts, Washers and Threaded Rods are classified under Incoloy. Werkstoff 1.4959 Fasteners are internationally known as fasteners manufactured from incoloy 800HT.

– Finish: Pickling and Passivation

– Compatible Fasteners: Incoloy 800ht Washers | Incoloy 800ht Nuts

– Marking: TorqBolt 1.4959

– Type: Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling

000

Product Features

DimensionsDIN 931, 933, 934, 7991, 976
ThreadsUnless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically at the option of TorqBolt
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Melt OriginEast Europe/South America/Korea/Japan
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

1.4959 Fasteners Specification

Incoloy 800ht Properties

Chemical Physical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

ADDITIONAL INFORMATION

TorqBolt is a well known stockist of Pitch Dia incoloy 800HT Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

Incoloy is a registered trademark of Special Metals Corporation.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.