ASTM A453 Grade 660 Class D Bolts, A286, Square, Hex Bolts, Hex Cap Screws, Lag Screws, Hex Socket and Spline Socket Screws, Studs, Stud Bolts, Threaded Rod, DIN 2510/939/940, ASME B18.2.1, B18.3, B1.1 Inch Unified Threads
ASTM A453 Grade 660 Class D bolts are Iron Based Super Alloy bolts manufactured from iron-nickel-chromium alloy with additions of molybdenum and titanium. A453 660 Class D Bolts maintain good strength and oxidation resistance at temperatures up to 1300ºF. Torqbolt is a prominent A453 gr 660 Class D bolt supplier in India.
Precipitation Hardening Steel
Solution Annealed and Precipitation Hardened
– Finish: Pickling and Passivation
– Marking: TorqBolt | BEA 660D
– Type: Cold Forged, Hot Forged, Bar Stock Machined
|Dimensions||ASME B18.2.1, B18.3|
|Threads||Unless otherwise specified, the threads shall be rolled or cut at the option of TorqBolt|
|Threads Configuration||ASME B1.1 2A/3A Inch Unified Threads and B1.13M 6h Metric Coarse Threads|
|Melt Origin||East Europe/South America/Korea/Japan|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
ASTM A453 660 Class D Bolts Specification
ASTM A453 Grade 660 Class D Bolts, Screws, studs and nuts are Iron Based Super Alloy bolts with 24% Nickel and 13.5% Chromium used as high temperature bolting with austenite stainless steel type Co-efficient of expansion. A453 660 Cl D Bolts have a relatively higher tensile strength as compared to Grade 660 A, B & C Bolting. To achieve higher tensile stress & yield strength A453 Grade 660 Class D Boltings are aged twice at around 70 degrees Celsius lower than the first ageing treatment. Unlike Gr 660 Class d Bolts, Class c Bolts require stress-rupture test at 650 degrees Celsius with a minimum stress of 385 Mpa for at least 100 hours. The maximum permissible hardness for 660 C Bolting is 35 HRC.
Finishing Process for ASTM A453 Gr 660D Stud Bolts, Bolts, Screws Threads for studs, screws and bolts made of A453 Gr 660D can be formed by machining or rolling from Pitch Diameter. Keeping the heat treatment condition of A453 Grade 660D, Threads may be formed after precipitation hardening or after solution annealing but prior to precipitation age hardening.The following Type designations of A453 660D Studs & Bolts are as follows:
- Type M1threads formed by machining after Precipitation Hardening.
- Type M2threads formed by machining after solution annealing but prior to precipitation hardening.
- Type R1threads formed by rolling after precipitation hardening.
- Type R2threads formed by rolling after solution annealing but prior to precipitation hardening.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Pitch Dia ASTM A453 Grade 660 Class D Round Bars from ¼-4 & 6mm 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter as specified in ASTM A453 Specification . ATI A286 is a registered trademark of ATI Metals.