Werkstoff 3.4365 Aluminium 7075 Stainless Steel Bolts
AIZNMGCU1.5, BSL95/L96, 3.4365, 7075, A97075
3.4365 Fasteners like Bolts are classified under Aluminium Alloy. Werkstoff 3.4365 Fasteners are internationally known as fasteners manufactured from Aluminium 7075.
Related Products
Aluminium 7075 Bolts Aluminium 7075 Fasteners Aluminium 7075 Forgings Aluminium 7075 Nuts Aluminium 7075 Screws Aluminium 7075 Studs Aluminium 7075 Threaded Rod Aluminium 7075 Washers 3.4365 Fasteners
Werkstoff 3.4365 Stainless Steel Bolts Properties
Werkstoff 3.4365 Stainless Steel Bolts Chemical Requirements
| UNS Designation Number | Alloy | General Name | AlB | Cr | Cu | Fe, max | Mn, max | Si, max | Ti, max | Zn, max | Mg | Other Elements, max | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | Total | ||||||||||||
| ASTM F468 Grade A97075 | 7075 | Aluminum 7075 | balance | 0.18-0.35 | 1.2-2.0 | 0.50 | 0.30 | 0.40 | 0.20D | 5.1-6.1 | 2.1-2.9 | 0.05 | 0.15 |
Werkstoff 3.4365 Stainless Steel Bolts Mechanical Requirements
| Alloy | Mechanical Property Marking | Nominal Thread Diameter, in. | HardnessA | Full-Size TestsB | Machined Specimen Tests | |||
|---|---|---|---|---|---|---|---|---|
| Tensile Strength, ksi | Yield Strength, min, ksiC | Tensile Strength, min, ksi | Yield Strength min, ksiC | Elongation in 4D, min, %D | ||||
| ASTM F468 Alloy Al 7075-T73F | F468Z | All | 80-90 HRB | 61-76 | 50 | 68 | 56 | 10 |
ASTM F468/F468M Tensile Stress Areas and Threads(Inch)
| Nominal Size, in. | Coarse Threads-UNC | Fine Threads-UNF | 8 Thread Series-8UN | |||
|---|---|---|---|---|---|---|
| Threads/ in. | Stress AreaA, in.2 | Threads/ in. | Stress AreaA, in.2 | Threads/ in. | Stress AreaA, in.2 | |
| 1/4 | 20 | 0.0318 | 28 | 0.0364 | . . . | . . . |
| 5/16 | 18 | 0.0524 | 24 | 0.0580 | . . . | . . . |
| 3/18 | 16 | 0.0775 | 24 | 0.0878 | . . . | . . . |
| 7/16 | 14 | 0.1063 | 20 | 0.1187 | . . . | . . . |
| 1/2 | 13 | 0.1419 | 20 | 0.1599 | . . . | . . . |
| 9/16 | 12 | 0.1820 | 18 | 0.2030 | . . . | . . . |
| 5/8 | 11 | 0.2260 | 18 | 0.2560 | . . . | . . . |
| 3/4 | 10 | 0.3340 | 16 | 0.3730 | . . . | . . . |
| 7/8 | 9 | 0.4620 | 14 | 0.5090 | . . . | . . . |
| 1 | 8 | 0.6060 | 12 | 0.6630 | . . . | . . . |
| 11/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
| 11/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
| 13/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
| 11/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.492 |