Blog
BS DIN EN 3.3211 Aluminium 6061 Stainless Steel Bolts | ASTM F468 UNS A96061 Specifications
  • Fasteners
  • Werkstoff 3.3211 Aluminium 6061 Stainless Steel Bolts

    • Werkstoff 3.3211 Aluminium 6061 Stainless Steel Bolts

    ALMG1SICU, 3.3211, 6061, A96061

    3.3211 Fasteners like Bolts are classified under Aluminium Alloy. Werkstoff 3.3211 Fasteners are internationally known as fasteners manufactured from Aluminium 6061.

    Related Products

    Aluminium 6061 Bolts Aluminium 6061 Fasteners Aluminium 6061 Forgings Aluminium 6061 Nuts Aluminium 6061 Screws Aluminium 6061 Studs Aluminium 6061 Threaded Rod Aluminium 6061 Washers 3.3211 Fasteners

    Werkstoff 3.3211 Stainless Steel Bolts Properties

    Werkstoff 3.3211 Stainless Steel Bolts Chemical Requirements

    UNS Designation Number Alloy General Name AlB Cr Cu Fe, max Mn, max Si, max Ti, max Zn, max Mg Other Elements, max
    Each Total
    ASTM F468 Grade A96061 6061 Aluminum 6061 balance 0.04-0.35 0.15-0.40 0.7 0.15 0.40-0.8 0.15 0.25 0.8-1.2 0.05 0.15

    Werkstoff 3.3211 Stainless Steel Bolts Mechanical Requirements

    Alloy Mechanical Property Marking Nominal Thread Diameter, in. HardnessA Full-Size TestsB Machined Specimen Tests
    Tensile Strength, ksi Yield Strength, min, ksiC Tensile Strength, min, ksi Yield Strength min, ksiC Elongation in 4D, min, %D
    Al 6061-T6F F468Y All 40-50 HRB 37-52 31 42 35 10

    ASTM F468 Tensile Stress Areas and Threads(Inch)

    Nominal Size, in. Coarse Threads-UNC Fine Threads-UNF 8 Thread Series-8UN
    Threads/ in. Stress AreaA, in.2 Threads/ in. Stress AreaA, in.2 Threads/ in. Stress AreaA, in.2
    1/4 20 0.0318 28 0.0364 . . . . . .
    5/16 18 0.0524 24 0.0580 . . . . . .
    3/18 16 0.0775 24 0.0878 . . . . . .
    7/16 14 0.1063 20 0.1187 . . . . . .
    1/2 13 0.1419 20 0.1599 . . . . . .
    9/16 12 0.1820 18 0.2030 . . . . . .
    5/8 11 0.2260 18 0.2560 . . . . . .
    3/4 10 0.3340 16 0.3730 . . . . . .
    7/8 9 0.4620 14 0.5090 . . . . . .
    1 8 0.6060 12 0.6630 . . . . . .
    11/8 7 0.7630 12 0.8560 8 0.790
    11/4 7 0.9690 12 1.0730 8 1.000
    13/8 6 1.1550 12 1.3150 8 1.233
    11/2 6 1.4050 12 1.5810 8 1.492