310 Stainless Steel Washers, Flat Washers, Spring Washers, Lock Washers, Square Washers, DIN 125/127, ISO 7089/7090, ASME B18.22.1
310 Stainless Steel Washers are austenitic stainless steel washers manufactured from alloy containing chromium and nickel. Stainless Steel 310 Washers are used for high temperature service and highly corrosive environments. TorqBolt is an eminent 310 Stainless Steel washer supplier in India.
ASTM A240 Type 310
ASME SA240 Type 310
– Finish: Pickling and Passivation
– Marking: TorqBolt S31000
– Type: Cold Formed, Hot Formed, Bar Stock Machined
|Dimensions||DIN 125/127, ISO 7089/7090, ASME B18.22.1|
|Product Origin||Made in India|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Additional Certifications||PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified|
|Additional Requirements||NACE MR0103/MR0175/ISO 15156 Compliance|
|Mandatory Requirements||Free from Mercury & Radioactive Contamination|
310 Stainless Steel Washers Specification
AISI 310 it has very good and appreciable properties with good ductility and weldeabilty. It has good oxidation resisatnce at higher temperatures as 1150 Degrees celcious. As it has more chromium and nickel content, as it is superior in most environmnets. It is used in over linings, boiler baffles, lead pots, combustion tubes, refractory. This type of rade is easily welded using fusion or resiatnce method, however, oxytelene welding is not recommended. During hot working rapid cooling is required to maximize corossion resistance.
Add a Review
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
TorqBolt is a well known stockist of Pitch Dia 310 Stainless Steel Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.
Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.