NF Standards

STANDARDSDESCRIPTION
NF A35-557-1983(Iron and steel. Heat treatable steels for externally threaded, high performance fasteners for engineering purposes.)
NF P21-303-1993(TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF EMBEDDING STRENGTH AND FOUNDATION VALUES FOR DOWEL TYPE FASTENERS. (EUROPEAN STANDARD EN 383).)
NF E25-600-1984(FASTENERS. WOOD SCREWS FAMILY STANDARD.)
NF E25-006-2000(Fasteners – Acceptance inspection.)
NF E25-418-1991(FASTENERS. RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.)
NF E25-004-1984(Fasteners. Short notations.)
NF H50-010-1-1996(Methods of test for pallet joints. Part 1 : determination of bending resistance of pallet nails, other dowel-type fasteners and staples.)
NF E25-800-2-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-139-1987(FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.)
NF E65-115-1999(Acoustics – Noise test code for fastener driving tools – Engineering method.)
NF L23-310-1977(AIRCRAFT FASTENERS. SPLIT PINS.)
NF A35-558-1999(Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.)
NF E25-400-3-1992(Fasteners. Surface discontinuities. Nuts.)
NF E25-023-1992(Fasteners. Clearance hole for bolts and screws.)
NF P21-388-2002(Timber fasteners – Characteristic load-carrying capacities and slip-moduli for connector joints.)
NF E25-850-1985(FASTENERS. SQUARE BEND HOOKS.)
NF E25-800-0-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).)
NF E51-361-1995(Rotary tools for threaded fastners. Performance test method.)
NF E25-800-1-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-100-5-1998(Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.)
NF E65-100-6-2000(Hand-held non-electric power tools – Safety requirements – Part 6 : assembly power tools for threaded fasteners.)
NF E25-134-1987(Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.)
NF L23-350-1966(AIRCRAFT FASTENERS. TAB WASHERS MADE OF STEEL PLATE,FLAT TYPE.)
NF L22-031-2003(Fasteners – Selection of metallic materials.)
NF E25-100-3-1992(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).)
NF E27-191-1983(FASTENERS. SHOULDERED RETAINING SCREWS.)
NF E25-007-1982(Fasteners. Order and delivery specifications.)
NF P21-205-3-1995(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 3 : PARTICULAR SPECIFICATIONS BOOK.)
NF E25-400-1-1994(Mechanical properties of fasteners. Part 2 : nuts with specified proof load values. Coarse thread.)
NF E27-009-1979(FASTENERS. FATIGUE TEST UNDER AXIAL LOAD.)
NF E25-019-2000(Fasteners – Ends of parts with external ISO metric screw thread.)
NF E25-022-1987(FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.)
NF E25-140-1994(FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.)
NF L22-035-1966(AIRCRAFT FASTENERS. MARKING. (RECH.).)
NF E25-042-2003(Passivation of corrosion-resistant stainless-steel fasteners.)
NF E25-501-2000(Tolerances for fasteners – Part 3 : plain washers for bolts, screws and nuts – Product grades A and C.)
NF E25-851-1987(FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)
NF L22-062-1966(ISO ACROSS FLATS FOR FASTENERS WITH SPANNER DRIVE.)
NF E27-355-1980(FASTENERS. EQUIPMENT FOR WORKING THE SOIL. COUNTERSUNK HEAD NIB BOLTS FOR FASTENING THIN WEAR PARTS.)
NF E25-133-1987(Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.)
NF B51-166-2002(Wood-based panels – Determination of withdrawal capacity of fasteners.)
NF E25-100-4-1992(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).)
NF E25-142-1991(FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)
NF E25-100-1-1999(Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1 : bolts, screws and studs.)
NF E25-540-2002(Fasteners – Nut lock.)
NF L21-215-2000(Fasteners – Rivets, solid, universal head.)
NF T47-131-2002(Conveyor belts – Determination of strength of mechanical fastenings – Static test method.)
NF E25-035-1995(FASTENERS. STAINLESS STEEL THREADED CONNECTIONS. TEST METHODS. FITNESS FOR USE.)
NF E25-144-1991(FASTENERS. ENTIRELY THREADED ARC WELDING STUDS. SYMBOL SF.)
NF E25-136-1986(Fasteners. Threaded rods. Product grades A and B.)
NF L22-722-1966(AIRCRAFT FASTENERS. HOLLOW PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).)
NF L22-500-2001(Fasteners – Nuts, self-locking, with maximum operating temperature less than or equal to 425 o – Technical requirements.)
NF E25-100-7-1995(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
NF L22-030-1966(AIRCRAFT FASTENERS. STEEL GRADES AND MECHANICAL PROPERTIES. (RECH.).)
NF P21-205-2-1995(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 2 : DESIGN RULES.)
NF L22-723-1966(AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITHOUT SPLIT PIN HOLE. (ISO THREAD). (RECH.).)
P21-205-1995(DTU 31-3 – Timber structures connected with metal plate fasteners or gussets – Part 2 : design rules – Part 3 : particular specifications book.)
NF L21-271-2000(Fasteners – Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF E25-145-1991(FASTENERS. PARTIALLY THREADED ARC WELDING STUDS. SYMBOL SF.)
NF E27-156-1983(Fasteners. Structural round head rivets.)
NF L21-273-2000(Fasteners – Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF E25-113-1992(Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).)
NF E65-100-1-2000(Hand-held non-electric power tools – Safety requirements – Part 1 : assembly power tools for non-threaded mechanical fasteners.)
NF A35-556-1984(Iron and steel. Heat treatable steels for externally threaded fasteners for structural purposes.)
NF L20-010-1989(AEROSPACE SERIES. EQUIPMENT. CHOICE OF FASTENERS,NF E SERIES.)
NF E25-666-1987(FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. SYMBOL CBL ZS.)
NF L23-142-1966(AIRCRAFT FASTENERS. THICK CHAMFERED WASHERS.)
NF P21-205-1-1995(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 1 : CONSTRUCTION RULES.)
NF L21-250-2000(Fasteners – Rivets, tubular.)
NF L21-272-2000(Fasteners – Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF P21-384-1993(TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF THE YIELD MOMENT OF DOWEL TYPE FASTENERS. NAILS. (EUROPEAN STANDARD EN 409).)
NF L23-351-1966(AIRCRAFT FASTENERS. EXTERNAL TAB WASHERS MADE OF STEEL PLATE.)
NF E25-022-1-2001(Tolerances for fasteners – Bolts, screws, studs and nuts – Part 1 : product grades A, B and C.)
NF E25-040-2000(Fasteners – Non-electrolytically applied zinc flake coatings.)
NF E25-800-3-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.)
NF E25-143-1991(FASTENERS. WELDINGSTUDS BY CONDENSOR DISCHARGE. SYMBOL SD.)
NF E25-800-4-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.)
NF E25-100-6-1998(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
NF L22-721-1966(AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).)
NF L21-274-2000(Fasteners – Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF E25-651-2003(Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4 : tapping screws.)
NF P21-312-1999(Timber structures – Test methods – Joints made with punched metal plate fasteners.)
NF E25-100-8-1998(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.)
NF P21-380-2002(Timber structures – Test methods – Cyclic testing of joints made with mechanical fasteners.)
NF E25-009-1999(Fasteners – Electroplated coatings.)
NF P21-385-1999(Timber fasteners – Specifications for connectors for timber.)
NF E25-011-1992(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
NF L22-023-1967(LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO B.N.A.E. TOLERANCES.)
NF L22-024-1967(LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO ISO TOLERANCES.)
NF E25-001-2003(Fasteners – Quality assurance system.)
STANDARDSDESCRIPTION
NF L24-120-1998(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3010).)
NF L22-567-2001(Aircraft bolts and nuts – Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambiant temperature)
NF L21-272-2000(Fasteners – Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L24-228-1996(AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).)
NF E29-042-2-2002(Flanges and their joints – Bolting – Part 2 : classification of bolt materials for steel flanges, PN designated.)
NF E25-115-1-2001(Hexagon head bolts – Product grade C.)
NF F00-024-1978(RAILWAY MATERIAL IN GENERAL. FINISHED CLEARANCE FIT BOLTS.)
NF L22-436-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF E04-014-1933(TECHNICAL DRAWINGS FOR MECHANICAL,ELECTRICAL AND CONNECTED INDUSTRIES. GRAPHICAL SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.)
NF P37-414-1967(ROOFING ACCESSORIES. STAMPED SHEET OR STRIP METAL BOLT CLAMPS WITH INSERTED PIN.)
NF L24-229-1996(AEROSPACE SERIES. BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED. CLASSIFICATION : 1550 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2874).)
NF L24-102-1997(Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.)
NF L22-441-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L46-211-1988(AEROSPACE. OMEGA CLAMPS (SADDLE CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.)
NF P22-468-1987(Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.)
NF L22-574-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa ()
NF E27-342-1961(COUNTERSUNK OR RAISED COUNTERSUNK HEAD BOLTS (NIB OR SQUARE NECK) FOR TIMBER.)
NF L21-274-2000(Fasteners – Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L22-433-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.)
NF L24-179-1995(AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2649).)
NF E25-504-1998(HEXAGON BOLTS WITH FLANGE. SMALL SERIES. (EUROPEAN STANDARD EN 1662).)
NF E27-711-1982(Locking bolts and nuts intended for use in metal constructions. Hexagon bolts. Dimensions and tolerances.)
NF P22-469-1978(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. CALIBRATION OF TORQUE WRENCHES.)
NF L21-271-2000(Fasteners – Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L31-522-1988(Aerospace series. Bearings-spherical plain in steel with assembly slots. Dimensions and loads.)
NF L22-451-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-444-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-593-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa ()
NF L22-569-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated – Classification : 1 100 MPa (at ambient tempeer)
NF E25-501-2000(Tolerances for fasteners – Part 3 : plain washers for bolts, screws and nuts – Product grades A and C.)
NF E27-414-1969(CASTLE NUTS.)
NF L24-224-1994(AEROSPACE SERIES. BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (NORME EUROPEENNE EN 3063).)
NF E27-312-1959(CHEESE HEAD NIB BOLTS.)
NF L22-437-2000(Aircraft bolts and nuts – Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-591-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated – Classification : 1 100 MPa (at a)
NF L31-521-1988(Aerospace series. Bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads.)
NF E27-701-1984(Structural bolts and nuts intented for use in steel structures. Technical specifications. Order, test and delivery conditions.)
NF L22-443-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-570-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambient tempera)
NF L22-594-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa)
NF E27-702-1984(Structural bolts and nuts intented for use in steel structures. Test on suitability of bolts for use.)
NF E25-100-4-1992(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).)
NF E25-100-3-1992(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).)
NF P26-422-1949(HARDWARE. PADLOCK EYE.)
NF E27-000-1972(Bolts, nuts and accessories.nomenclature.)
NF P22-460-1979(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. STRUCTURES REQUIREMENTS AND CHECKING OF JOINTING.)
NF E27-353-1961(COUNTERSUNK HEAD NIB BOLTS (“PLOUGHSHARE“ TYPE).)
NF E25-800-0-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).)
NF E27-412-1973(LARGE SQUARE NUTS.DIAMETERS FROM 4 TO 30 MM.)
NF P22-461-1979(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. DETERMINAITON OF THE CONVENTIONAL COEFFICIENT OF FRICTION.)
NF E25-140-1994(FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.)
NF E27-314-1959(COUNTERSUNK OR RAISED COUNTERSUNK HEAD NIB BOLTS.)
NF T81-152-1978(TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. ROADS TANKERS. 500 AND 600 DOMCOVER. CLOSING DEVICES WITH CLAMPS.)
NF L22-439-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.)
NF M81-450-1989(MINING EQUIPMENT. RESIN ANCHOR BOLTS. SPECIFICATIONS AND TEST METHODS.)
NF E25-023-1992(Fasteners. Clearance hole for bolts and screws.)
NF E25-100-6-1998(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
NF L22-440-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF L24-116-1994(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3006).)
NF E74-300-1998(Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.)
NF F56-121-1984(Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized hexagon head bolts.)
NF P22-462-1978(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. FABRICATION AND PREPARATION OF JOINTS.)
NF F05-004-1972(FIXED RAILWAY EQUIPMENT. EXPANSION BOLTS WITH SPIKES FOR EXTRA FIRM FIXING.)
NF A47-251-5-2003(Terminations for steel wire ropes – Safety – Part 5 : U-bolt wire rope grips.)
NF L92-211-1980(Fastening eye bolts for aircraft handling equipment with metric ISO thread. Profile and BNAE tolerances.)
NF P22-463-1978(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. EXECUTION OF JOINTS.)
NF L22-592-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (a)
NF L22-525-2001(Aircraft bolts and nuts – Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambiant temperature) / 235 oC.)
NF L22-571-2000(Aircraft bolts and nuts – Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated – Classification : 1 100 MPa (at am)
NF E27-351-1969(ROUND HEAD SQUARE NECK BOLTS (“JAPY“ TYPE).)
NF L22-461-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
NF T81-151-1977(TRANSPORTATION AND HANDLING OF CHEMICALS. ROAD TANKERS. CAPS FOR VALVES FIXED BY PINS OR BOLTS.)
NF L22-236-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.)
NF R93-183-1980(MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.)
NF E29-041-1994(INDUSTRIAL PIPEWORK. REDUCED SHANK BOLTS. SPECIFICATIONS.)
NF R16-217-1986(ROAD VEHICLES. SINGLE FUEL FILTERS WITH HORIZONTAL FLANGES AND CENTRE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
NF E29-042-1-2000(Flanges and their joints – Bolting – Part 1 : selection of bolting.)
NF J65-175-1958(SHIPBUILDING. SHAFT LINES. COUPLINGS. DETAILS OF SHAFT ENDS,KEYS AND ASSEMBLY BOLTS FOR MUFF COUPLINGS.)
NF L24-103-1995(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).)
NF F00-022-1978(RAILWAY MATERIAL IN GENERAL. HALF-FINISHED ADJUSTING BOLTS.)
NF L22-519-2000(Aircraft bolts and nuts – Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 550 MPa (at ambient temperature) / 235 oC.)
NF L22-590-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient temper)
NF L20-021-1995(AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS DESIGN STANDARD. (EUROPEAN STANDARD EN 3202).)
NF L22-246-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.)
NF L22-576-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambien)
NF L22-462-2000(Aircraft bolts and nuts – Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
NF L22-577-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 M)
NF L22-572-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at)
NF F76-014-1987(Fixed railway equipment. Fork-wrenchs of 38 for fish-bolts.)
NF P22-466-1979(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. METHODS OF TIGHTENING AND CHECKING OF BOLTS.)
NF L24-118-1998(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).)
NF E25-525-2000(Plain washers for metric bolts, screws and nuts for general purposes – General plan.)
NF F56-208-1980(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. RINGS FOR BRACING BOLTS.)
NF L22-575-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambient t)
NF L22-596-2000(Aircraft bols and nuts – Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambien)
NF E27-488-1972(Cotter pin hole dimensions.)
NF P22-430-1982(Metal construction. Assembly by non-prestressed bolts. Conditions of construction and design of the bolts.)
NF E25-112-2001(Hexagon head bolts – Product grades A and B.)
NF L22-434-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF F37-060-1983(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS AND TANK CONTAINERS FOR CARRYING LIQUID CHEMICAL PRODUCTS. DOME COVER WITH A TOGGLE-BOLT CLOSING DEVICE.)
NF L22-541-2001()
NF L22-442-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF E25-800-3-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.)
NF L22-453-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF E25-800-1-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF L22-455-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.)
NF F76-026-1976(FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. KEY-BOLTS. KEY.)
NF E27-355-1980(FASTENERS. EQUIPMENT FOR WORKING THE SOIL. COUNTERSUNK HEAD NIB BOLTS FOR FASTENING THIN WEAR PARTS.)
NF A49-580-1988(Cooplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes. Requirements and test procedures.)
NF L35-172-1990(AEROSPACE SERIES. ROD ENDS,AJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AN THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2498).)
NF L24-971-1995(Aerospace series. Bolts, shoudered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 degrees celsius.)
NF E25-011-1992(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
NF P37-416-1967(ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH EXTENDED PIN.)
NF A87-021-1998(Welding. Studs and ceramic ferrules for arc stud welding.)
NF L22-432-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
NF L24-107-1995(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).)
NF L22-595-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient)
NF L22-589-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient tempe)
NF R16-218-1986(ROAD VEHICLES. HEADS FOR SPIN-ON FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
NF E27-313-1959(ROUND HEAD NIB BOLTS.)
NF L22-588-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient temper)
NF L31-554-1988(Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, light series. Dimensions and loads.)
NF A89-600-1998(WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).)
NF L22-587-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient temperatu)
NF M87-400-1984(Petroleum industry. Steel gate valves with-on flanges and joints. ISO PN 20 to ISO PN 420.)
NF L22-458-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF F00-025-1971(GENERAL RAILWAY EQUIPMENT. EYE-BOLTS.)
NF R16-331-1986(ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.)
NF L24-121-1998(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3011).)
NF L92-221-1980(Fastening eye bolts for aircraft handling equipment with metric ISO thread profile and tolerances. Strengthened type.)
NF L24-211-1994(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
NF L22-568-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperat)
NF E25-504-1-2003(Hexagon bolts with flange with metric fine pitch thread – Small series.)
NF L43-312-1973(SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,BANJO BOLT.)
NF P22-431-1978(METAL CONSTRUCTION. ASSEMBLY BY NON PRESTRESSED BOLTS. EXECUTION OF ASSEMBLIES.)
NF L22-438-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF E27-341-1973(BOLTS FOR TIMBER.)
NF L24-381-1994(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
NF F42-031-1990(RAILWAY FIXED EQUIPMENT. CRIMPED OR BOLT CRIMPED TERMINAL MATERIAL FOR ELECTRIC TRACTION LINES.)
NF L24-101-1994(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) /425 DEGREES C. (EUROPEAN STANDARD EN 3052).)
NF L24-104-1995(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).)
NF L22-573-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at)
NF F56-122-1984(Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized round head bolts.)
NF L24-030-1997(AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).)
NF E27-682-1965(Round or square washers for timber.)
NF E25-100-1-1999(Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1 : bolts, screws and studs.)
NF F00-023-1978(RAILWAY MATERIAL IN GENERAL. FINISHED TIGHT-FIT BOLTS.)
NF E25-505-1997(HEXAGON BOLTS WITH FLANGE. HEAVY SERIES. (EUROPEAN STANDARD EN 1665).)
NF E25-800-4-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.)
NF L24-119-1998(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED. CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3009).)
NF E29-043-1990(Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.)
NF L24-105-1995(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2887).)
NF R47-203-1952(Spring leaves fastening bolts.)
NF E25-800-2-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-113-1992(Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).)
NF E27-354-1961(COUNTERSUNK HEAD SQUARE NECK BOLTS (“PLOUGHSHARE“ TYPE).)
NF L05-224-1990(Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.)
NF L05-230-2-1990(AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.)
NF L22-512-2001(Aircraft bolts and nuts – Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambian)
NF L24-108-1995(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).)
NF E25-152-2001(Hexagon head bolts with metric fine pitch thread – Product grades A and B.)
NF E25-022-1-2001(Tolerances for fasteners – Bolts, screws, studs and nuts – Part 1 : product grades A, B and C.)
NF L22-040-1956(AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).)
NF S83-261-1995(Horology. Studs.)
NF L22-237-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.)
NF P37-415-1967(ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH INSERTED PIN.)
NF L24-106-1995(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2888).)
NF L31-553-1988(Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads.)
NF L22-457-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.)
NF P26-323-1999(Building hardware – Door and window bolts – Requirements and test methods.)
NF L31-555-1988(Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, normal series. Dimensions and loads.)
NF L21-273-2000(Fasteners – Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L22-431-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
NF E25-100-7-1995(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
STANDARDSDESCRIPTION
NF L22-436-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF E84-006-1998(Steel wire and wire products for fences. Part 3: hexagonal steel wire netting for engineering purposes.)
NF L24-601-1990(AEROSPACE. NUTS,HEXAGONAL,SELF-LOCKING,WITH MJ THREADS,COATED OR UNCOATED,CLASSIFICATION 1100 MPA/235 DEGREES C,1100 MPA/315 DEGREES C OR 1100 MPA/425 DEGREES C. DIMENSIONS.)
NF L22-435-2000(Nuts, hexagonal, plain, reduced height, normal across flats, ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter.)
NF L22-547-1975(Self-locking anchor nuts, single lug with two holes. Sim thread (rech.).)
NF E25-400-6-1998(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 2 : nuts.)
NF L43-400-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Tees, reduced with thrust wire nut on run.)
NF L22-594-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa)
NF E25-401-2001(Hexagon nuts, style 1 – Product grades A and B.)
NF E74-362-1997(Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.)
NF L22-451-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF F11-003-1970(RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.)
NF E25-407-2001(Hexagon nuts, style 2 – Product grades A and B.)
NF L24-665-1996(AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3013).)
NF L22-236-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.)
NF L22-541-2001()
NF L22-275-1982(Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.)
NF L22-237-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.)
NF E84-005-1998(Steel wire and wire products for fences. Part 2 : hexagonal steel wire netting for agricultural, insulation and fencing purposes.)
NF L22-444-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF E25-405-2-2001(Hexagon thin nuts (unchamfered) – Product grade B.)
NF E74-313-2001(Assembly tools for screws and nuts – Double-headed, deep offset and modified offset, box wrenches – Length of wrenches and thickness of the heads.)
NF L22-442-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-512-2001(Aircraft bolts and nuts – Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambian)
NF L22-438-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L24-513-2001(Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in steel, cadmium plated – Classification : 900 MPa (at ambient temperature) / 235 o C.)
NF L24-664-1996(AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION: 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3012).)
NF L22-457-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.)
NF E25-420-1997(PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS, STYLE 2. PROPERTY CLASSES 5, 8, 10 AND 12. (EUROPEAN STANDARD EN ISO 7042).)
NF L22-462-2000(Aircraft bolts and nuts – Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
NF L22-592-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (a)
NF L24-225-1996(Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L22-040-1956(AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).)
NF L22-595-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient)
NF E25-022-1-2001(Tolerances for fasteners – Bolts, screws, studs and nuts – Part 1 : product grades A, B and C.)
NF L24-509-1996(AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION: 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3377).)
NF E74-363-1-1997(Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.)
NF L22-555-1985(Self-locking anchor nuts, miniature series, two lugs. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
NF E27-215-1976(LOCKING SCREWS WITH HEXAGON NUT.)
NF L22-413-1973(HEXAGON THIN NUTS. SIM THREAD. (RECH.).)
NF L22-274-1982(Pan head screws,B.N.A.E. Cross recess. ISO thread.)
NF E25-406-1998(Hexagon nuts with flange.)
NF L24-512-2001(Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated – Classification : 900 MPa (at ambient temperature) / 650 o C.)
NF L22-565-1979(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 120 DEGREES C. ISO THREAD.)
NF L24-471-1989(AEROSPACE SERIES. NUTS,ANCHOR,SELF LOCKING,FIXED,TWO LUG,REDUCED SERIES,WITH COUNTERBORE. CLASSIFICATION : 1100 MPA/235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2752).)
NF E74-331-2003(Assembly tools for screws and nuts – Hexagon socket screw keys.)
NF L22-063-1970(CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)
NF P22-468-1987(Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.)
NF L22-569-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated – Classification : 1 100 MPa (at ambient tempeer)
NF E74-324-2001(Assembly tools for screws and nuts – Adjustable wrenches.)
NF L22-251-1968(GENERAL PURPOSE 100 DEGREES COUNTERSUNK HEAD SCREWS WITH A.I.C.M.A. CROSS RECESS.)
NF E25-406-1-2003(Hexagon nuts with flange – Fine pitch thread.)
NF L24-508-1996(AEROSPACE SERIES. NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 4069).)
NF L22-411-1973(ORDINARY HEXAGON NUTS. SIM THREAD. (RECH.).)
NF F03-016-1983(Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.)
NF E25-402-2001(Hexagon nuts – Product grade C.)
NF L22-577-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 M)
NF E74-354-2002(Assembly tools for screws and nuts – Spiral ratchet screwdriver ends – Dimensions.)
NF L22-567-2001(Aircraft bolts and nuts – Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambiant temperature)
NF L22-537-1975(Self-locking anchor nuts, countersunk type, single lug with two holes. Sim thread (rech.).)
NF L22-558-1966(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE WITH TWO LUGS. MAXIMUM TEMPERATURE : 260 DEGREES C – 425 DEGREES C.)
NF E74-303-2001(Assembly tools for screws and nuts – Forged and tubular socket wrenches – Maximum outside head dimensions.)
NF L23-352-1974(Tab washers with long tab.)
NF E25-400-1-1994(Mechanical properties of fasteners. Part 2 : nuts with specified proof load values. Coarse thread.)
NF L22-556-1985(Self-locking anchor nuts, miniature series, single lug. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
NF E74-365-1997(Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.)
NF E74-363-3-2001(Assembly tools for screws and nuts – Square drive sockets – Part 3 : machine-operated sockets (“non impact“) – Dimensions.)
NF E74-367-1995(Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.)
NF E74-310-2001(Assembly tools for screws and nuts – Double-headed open-ended engineers’ wrenches – Length of wrenches and thickness of the heads.)
NF E25-418-1991(FASTENERS. RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.)
NF E25-525-2000(Plain washers for metric bolts, screws and nuts for general purposes – General plan.)
NF L22-439-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.)
NF L43-384-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Thrust wire nut.)
NF L22-425-1954(AIRCRAFT FASTENERS. HEXAGON THIN CASTLE NUTS. (RECH.).)
NF L24-472-1996(AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).)
NF L22-247-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS. FINE PITCH.)
NF E74-381-1997(Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.)
NF L22-432-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
NF L22-534-1975(Self-locking anchor nuts, countersunk type, two lugs with countersunk rivet holes. Sim thread (rech.).)
NF L24-469-1997(AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2264).)
NF L43-212-1973(UNION NUTS FOR CYLINDRICAL UNION.)
NF L22-575-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambient t)
NF L22-510-1954(AIRCRAFT FASTENERS WITH SIM THREAD. SELF-LOCKING HEXAGON NUTS FOR TEMPERATURES BELOW 300 DEGREES C. (RECH.).)
NF R12-775-1987(ROAD VEHICLES. WHEELS FOR COMMERCIAL VEHICLES. ATTACHEMENT STUD AND NUT.)
NF L43-377-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Elbows 45 o welded end with thrust wire nut.)
NF L22-412-1973(HEXAGON REDUCED NUTS. SIM THREAD. (RECH.).)
NF L43-381-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Tees with thrust wire nut on run.)
NF E74-366-1997(Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.)
NF L43-371-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Elbows 90 o with thrust wire nut.)
NF J65-120-1958(SHIPBUILDING. SHAFT LINES. PRINCIPLES FOR LOCKING OF PROPELLER NUTS.)
NF J65-180-1958(SHIPBUILDING. SHAFT LINES. COUPLINGS. TAPER BORE FLANGES. GENERAL ARRANGEMENT. NUT LOCKING PLATES.)
NF E74-305-2001(Assembly tools for screws and nuts – Double-ended wrenches – Size pairings.)
NF L22-568-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperat)
NF L22-573-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at)
NF J65-165-1958(SHIPBUILDING. SHAFT LINES. COUPLINGS. SHAFT ENDS,KEYS,NUTS.)
NF E25-421-1997(PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT), STYLE 1, WITH METRIC FINE PITCH THREAD. PROPERTY CLASSES 6, 8 AND 10. (EUROPEAN STANDARD EN ISO 10512).)
NF L24-600-1988(AEROSPACE. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C. TEST METHODS.)
NF E74-352-1998(Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)
NF R93-183-1980(MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.)
NF L22-571-2000(Aircraft bolts and nuts – Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated – Classification : 1 100 MPa (at am)
NF E74-321-1998(ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.)
NF E25-405-1-2001(Hexagon thin nuts (chamfered) – Product grades A and B.)
NF J41-445-1957(SHIPBUILDING. KINGSTON VALVES. UPPER GUIDE. TAB WASHER.)
NF L22-561-1985(Self-locking anchor nuts, floating, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
NF L22-434-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF U26-136-1997(EQUIPMENT FOR CROP PROTECTION. AIR-ASSISTED SPRAYERS. DIMENSIONS OF NOZZLE SWIVEL NUTS.)
NF J65-109-1958(SHIPBUILDING. SHAFT LINES. COLLAR NUTS FOR PROPELLERS.)
NF L22-500-2001(Fasteners – Nuts, self-locking, with maximum operating temperature less than or equal to 425 o – Technical requirements.)
NF L22-596-2000(Aircraft bols and nuts – Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambien)
NF E27-000-1972(Bolts, nuts and accessories.nomenclature.)
NF L43-380-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Tees branch with thrust wire nut.)
NF L22-455-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.)
NF J65-111-1958(SHIPBUILDING. SHAFT LINES. ORDINARY AND CAP PROPELLER NUTS WITH 4 LUGS.)
NF L22-431-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
NF L22-588-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient temper)
NF L22-548-1975(Self-locking anchor nuts, single lug with two countersunk rivet holes. Sim thread (rech.).)
NF E25-422-1997(PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS, STYLE 2, WITH METRIC FINE PITCH THREAD. PROPERTY CLASSES 8, 10 AND 12. (EUROPEAN STANDARD EN ISO 10513).)
NF L22-443-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-458-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-257-1982(General purpose 100 degrees countersunk head screws,B.N.A.E. Cross recess. ISO thread.)
NF L22-572-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at)
NF E25-506-1998(Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread.)
NF J25-310-1969(SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. STUFFING BOXES WITH GLAND AND NUT.)
NF L22-259-1982(100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.)
NF L22-258-1967(AIRCRAFT FASTENERS. PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,B.N.A.E. CROSS RECESS.)
NF L22-546-1975(Self-locking anchor nuts, single lug with countersunk rivet hole. Sim thread (rech.).)
NF F03-007-1983(Railway rolling stock. Grade A. Round head and domed head nuts. Symbols R and CR.)
NF E74-325-2003(Assembly tools for screws and nuts – Hand torque tools – Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.)
NF L22-559-1966(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,SINGLE LUG WITH TWO HOLES. MAXIMUM TEMPERATURE : 260 DEGREES C – 425 DEGREES C.)
NF L24-421-1994(AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3196).)
NF L24-510-1996(AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), MOS2 COATED. CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3723).)
NF L43-385-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Nut for welded ferrule.)
NF E25-507-1998(Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread.)
NF L22-538-1975(Self-locking anchor nuts, countersunk type, single lug with two countersunk rivet holes. Sim thread (rech.).)
NF L22-552-1985(Self-locking anchor nuts, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
NF L24-685-2001(Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) silver plated – Classification : 1 100 MPa (at ambient temperature) / 650 o C.)
NF L22-525-2001(Aircraft bolts and nuts – Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambiant temperature) / 235 oC.)
NF E74-360-2001(Assembly tools for screws and nuts – Drive ends for hand- and machine-operated screwdriver bits and connecting parts – Dimensions, torque testing.)
NF E25-451-2001(Hexagon nuts, style 1, with metric fine pitch thread – Product grades A and B.)
NF L22-576-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambien)
NF L24-410-1997(AEROSPACE SERIES. NUTS, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286). CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 3004).)
NF L22-542-1966(AIRCRAFT FASTENERS. SELF-LOCKING HEXAGON NUTS. MAXIMUM TEMPERATURE : 120 DEGREES C.)
NF E25-800-3-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.)
NF L22-589-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient tempe)
NF E27-209-1976(THUMB NUT “VIOLON TYPE“.)
NF J65-113-1958(SHIPBUILDING. SHAFT LINES. GROOVED PROPELLER NUTS.)
NF L22-437-2000(Aircraft bolts and nuts – Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-500M1-1974()
NF E25-011-1992(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
NF E74-304-2001(Assembly tools for screws and nuts – Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches – Maximum widths of heads.)
NF L24-684-2001(Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 o C.)
NF L22-273-1966(AIRCRAFT FASTENERS. NON-MAGNETIC PAN HEAD SCREWS WITH TRUNCATED CONE POINT. CROSS RECESS.)
NF L22-574-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa ()
NF L22-461-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
NF L22-562-1985(Self-locking anchor nuts, floating, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
NF L22-536-1975(Self-locking anchor nuts, countersunk type, single lug with countersunk rivet hole. Sim thread (rech.).)
NF L24-507-1995(AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2647).)
NF L24-511-2001(Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, silver plated – Classification : 900 MPa (at ambient temperature) / 650 o C.)
NF L24-675-1994(Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
NF L24-672-1994(Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
NF L22-540-1954(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT. (RECH.).)
NF L22-272-1966(AIRCRAFT FASTENERS. PAN HEAD SCREWS,FULLY THREADED,WITH A.I.C.M.A. CROSS RECESS.)
NF E74-361-1997(Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.)
NF L22-519-2000(Aircraft bolts and nuts – Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 550 MPa (at ambient temperature) / 235 oC.)
NF L24-666-1996(AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED THREAD. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3239).)
NF L43-373-2002(Aerospace series – Pipe coupling 8 o30′ in titanium alloy – Elbows 90 o, welded end with thrust wire nut.)
NF L22-553-1985(Self-locking anchor nuts, 90 degrees corner classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
NF E74-353-2-2002(Assembly tools for screws and nuts – Machine-operated screwdrivers bits – Part 2 : screwdriver bits for cross-recessed head screws.)
NF L22-545-1975(Self-locking anchor nuts, single lug with one hole. Sim thread (rech.).)
NF L22-591-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated – Classification : 1 100 MPa (at a)
NF L46-334-2002(Aerospace series – Pipe coupling 8 o30′ – Protective caps.)
NF L22-560-1966(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,90 DEGREES ANGLE. MAXIMUM TEMPERATURE : 260 DEGREES C – 425 DEGREES C.)
NF L22-252-1968(PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,A.I.C.M.A. CROSS RECESS.)
NF L22-543-1975(Self-locking anchor nuts, two lugs. Sim thread (rech.).)
NF E22-308-2-2001(Rolling bearings – Accessories – Part 2 : locknuts and locking devices – Dimensions.)
NF L24-673-1996(Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
NF E25-540-2002(Fasteners – Nut lock.)
NF R61-301-1978(HEXAGONAL NUTS AND SPANNERS FOR CYCLES.)
NF L22-433-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.)
NF L22-524-1969(NUT-DOUBLE HEXAGON, SELF LOCKING, FINE PITCH THREADS, FOR TEMPERATURES UP TO 650 DEGREES CELSIUS.)
NF L22-256-1966(AIRCRAFT FASTENERS. 100 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED,A.I.C.M.A. CROSS RECESS.)
NF E25-800-4-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.)
NF E25-414-1998(Prevailing torque type all-metal hexagon nuts with flange.)
NF L22-277-1968(DRILLED CHEESE HEAD SCREWS,FULLY THREADED,FOR TEMPERATURES ABOVE 260 DEGREES C.)
NF L22-246-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.)
NF E74-363-2-1997(Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.)
NF L20-030-1996(AEROSPACE SERIES. SHANK NUTS. INSTALLATION HOLES, 60 DEGREES SWAGE, FLANGES. DESIGN STANDARD. (EUROPEAN STANDARD EN 3149).)
NF L22-271-1966(AIRCRAFT FASTENERS. PAN HEAD SCREWS,WITH A.I.C.M.A. CROSS RECESS.)
NF L22-453-2000(Aircraft bolts and nuts – Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF L22-440-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
NF L43-386-2002(Aerospace series – Pipe coupling in titanium alloy – Bulkhead nuts.)
NF L22-587-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient temperatu)
NF E74-353-3-2002(Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3 : screwdriver bits for hexagon socket screws.)
NF F03-006-1983(Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.)
NF L24-009-1996(Aerospace series. Installation holes for self-locking, serrated shank nuts. Design standard.)
NF E74-311-2001(Assembly tools for screws and nuts – Double-headed, flat and offset, box wrenches – Length of wrenches and thickness of the heads.)
NF L22-531-1977(SELF-LOCKING CLINCH NUTS,IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. ISO THREAD.)
NF E25-501-2000(Tolerances for fasteners – Part 3 : plain washers for bolts, screws and nuts – Product grades A and C.)
NF E25-400-3-1992(Fasteners. Surface discontinuities. Nuts.)
NF L24-669-1994(Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
NF L22-535-1975(Self-locking anchor nuts, countersunk type, single lug with one hole. Sim thread (rech.).)
NF J65-115-1958(SHIPBUILDING. SHAFT LINES. COMBINED NUTS AND SPINNERS.)
NF E74-353-1-2002(Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1 : screwdriver bits for slotted head screws.)
NF L22-544-1975(Self-locking anchor nuts, two lugs with countersunk rivet holes. Sim thread (rech.).)
NF E74-300-1998(Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.)
NF F01-016-1971(RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH THREADED AND SLOTTED ENDS. NUTS.)
NF E25-453-2001(Hexagon thin nuts (chamfered) with metric fine pitch thread – Product grades A and B.)
NF E74-307-2001(Assembly tools for screws and nuts – Combination wrenches – Lengths of wrenches and maximum thickness of heads.)
NF L22-566-1979(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 235 DEGREES C. ISO THREAD.)
NF E74-351-2002(Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.)
NF L24-008-1996(Aerospace series. Shank nuts, self-locking, serrated. Installation procedure.)
NF E62-513-1997(COLLETS WITH 8 DEGREES SETTING ANGLE FOR TOOL SHANKS. COLLETS, NUTS AND FITTING DIMENSIONS.)
NF L22-551-1985(Self-locking anchor nuts, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
NF L22-570-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambient tempera)
NF L22-518-1966(AIRCRAFT FASTENERS. 12 POINT THICK FLANGE NUTS,SELF-LOCKING. TEMPERATURE CLASSES : 500,700,800 DEGREES C.)
NF E27-214-1976(LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.)
NF L22-593-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated – Classification : 1 100 MPa ()
NF L22-420-1954(AIRCRAFT FASTENERS. HEXAGON THICK CASTLE NUTS. (RECH.).)
NF L05-230-2-1990(AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.)
NF L87-125-1955(PROPELLER HUBS. LOCKNUTS.)
NF L22-522-1966(AIRCRAFT FASTENERS. 12 POINT THICK FLANGE NUTS,SELF-LOCKING,FINE PITCH. TEMPERATURE CLASSES : 500,700,800 DEGREES C.)
NF L22-441-2000(Aircraft bolts and nuts – Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
NF E25-452-2001(Hexagon nuts, style 2, with metric fine pitch thread – Product grades A and B.)
NF L22-517-1980(12 point self-locking flange nuts, in E-Z 6 nct 25 corrosion resisting steel. ISO thread.)
NF L22-533-1975(SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,TWO LUGS. SIM THREAD. (RECH.).)
NF L22-590-2000(Aircraft bolts and nuts – Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated – Classification : 1 100 MPa (at ambient temper)
STANDARDSDESCRIPTION
NF L24-232-1996(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L22-272-1966(AIRCRAFT FASTENERS. PAN HEAD SCREWS,FULLY THREADED,WITH A.I.C.M.A. CROSS RECESS.)
NF F10-404-1984(Railway transport equipment. Coupling screw of 0,25 mn.)
NF E25-611-1985(WOODSCREWS. SQUARE BEND SCREW HOOKS.)
NF L22-308-1977(HEXAGON SOCKET SET SCREWS,CONE POINT. ISO THREAD.)
NF L24-212-1996(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
NF E03-154-1970(THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWS AND NUTS.)
NF E25-656-1994(Cross recessed countersunk (flat) head tapping screws (common head style).)
NF L22-246-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.)
NF E74-362-1997(Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.)
NF L22-182-1976(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF E04-012-1-1996(Technical drawings. Screw threads and threaded parts. Part 1 : general conventions.)
NF L22-307-1977(HEXAGON SOCKET SET SCREWS,CUP POINT. ISO THREAD.)
NF L24-139-1997()
NF L24-025-1989(AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
NF L24-020-1989(AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
NF L22-121-1975(Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).)
NF L24-182-1996(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).)
NF E03-152-1981(Thread checking with limit gauges. Threaded gauges for screw.)
NF E25-520-1998(PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (EUROPEAN STANDARD EN ISO 10673).)
NF E66-103-1993(Short machine taps and hand taps.)
NF S52-724-1994(CROSS-COUNTRY SKIS. SKI BINDING SCREWS. REQUIREMENTS.)
NF L22-236-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.)
NF C60-002-1994(Connecting devices for low voltage circuits for household and similar purposes. Part 2-2 : particular requirements for connecting devices as separate entities with screwless-type clamping units.)
NF E25-609-1985(WOODSCREWS. SCREW-EYES.)
NF L22-145-1985(Bolt, hexagonal head, for tensile application, ISO thread 4G class.)
NF E25-109-2001(Hexalobular socket pan head screws.)
NF E74-324-2001(Assembly tools for screws and nuts – Adjustable wrenches.)
NF L22-154-1975(Slotted raised 120 degrees countersunk head screws. Sim thread (rech.).)
NF E25-116-1983(Square head screws. Product grades A and B. Symbol Q.)
NF E74-351-2002(Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.)
NF C93-561-1981(Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.)
NF F50-006-1998(Railway fixed equipment. Sleeper screws with variable thread.)
NF S90-511-1973(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD. FULLY THREADED.)
NF E74-325-2003(Assembly tools for screws and nuts – Hand torque tools – Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.)
NF L22-112-1975(Hexagon head bolts with split pin hole. Sim thread (rech.).)
NF L22-129-1985(Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.)
NF L22-223-1983(HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.)
NF E27-167-1976(LOCKING SCREW WITH PALM KNOB.)
NF S90-421-1989(Implants for surgery. Metal bone screws with conical under-surfaces. Dimensions.)
NF E25-160-1992(SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).)
NF L22-111-1975(Hexagon head bolts without split pin hole. Sim thread (rech.).)
NF J46-126-1951(SHIPBUILDING. VENTILATORS. HANDLE AND LOCKING SCREW.)
NF E25-107-1983(SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.)
NF S52-707-1994(ALPINE SKIS. SKI BINDING SCREWS. REQUIREMENTS.)
NF L22-292-1979(SLOTTED 60 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.)
NF L22-137-1984(Bolt, hexagonal head, with locking hole, short thread.)
NF L24-185-1996(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2897).)
NF L22-148-1985(Bolts, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4G class.)
NF E74-381-1997(Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.)
NF L22-225-1983(HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.)
NF E25-100-4-1992(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).)
NF L24-384-1996(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
NF L22-139-1984(BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.)
NF L22-291-1979(SLOTTED 90 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.)
NF E25-653-2001(Hexalobular socket raised countersunk (oval) head tapping screws.)
NF L24-675-1994(Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
NF B51-260-1972(PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.)
NF F03-006-1983(Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.)
NF L22-305-1977(HEXAGON SOCKET SET SCREWS,FLAT POINT. ISO THREAD.)
NF E27-163-1972(ADJUSTING SCREW.)
NF L22-252-1968(PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,A.I.C.M.A. CROSS RECESS.)
NF E25-111-2001(Hexalobular socket cheese head screws.)
NF L24-184-1996(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRICUFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2886).)
NF L22-163-1984(Bolt, 100 degrees countersunk head, threaded to head, nf L 22-072 cross recess.)
NF S90-411-1988(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. OSTEOSYNTHESIS METAL SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACE. DIMENSIONS.)
NF E25-163-1992(SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).)
NF C20-115-1971(TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF THE CONDUCTOR.)
NF L22-176-1984(Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.)
NF E25-142-1991(FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)
NF E25-604-1984(Slotted countersunk head wood screws. Symbol FS.)
NF L22-090-1966(STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.)
NF E66-107-2000(Long shank taps with nominal diameters from M3 to M10 – Full-diameter shank taps with recess.)
NF L22-273-1966(AIRCRAFT FASTENERS. NON-MAGNETIC PAN HEAD SCREWS WITH TRUNCATED CONE POINT. CROSS RECESS.)
NF L24-135-1997()
NF L22-126-1985(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.)
NF L24-221-1996(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
NF L22-208-1984(Bolt, hexagonal head, threaded to head. ISO thread.)
NF E25-657-1994(Cross recessed raised countersunk (oval) head tapping screws.)
NF L22-134-1975(Precision hexagon head bolts without split pin hole. Sim thread (rech.).)
NF E25-128-1994(Slotted pan head screws. Product grade A.)
NF L24-383-1996(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
NF E74-360-2001(Assembly tools for screws and nuts – Drive ends for hand- and machine-operated screwdriver bits and connecting parts – Dimensions, torque testing.)
NF F55-251-1991(RAILWAY FIXED EQUIPMENT. SIGNALLING. CIRCUITS. CONNECTING AND BREAKING COMPONENTS. SCREW-TYPE TERMINAL BLOCKS.)
NF L22-063-1970(CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)
NF F03-016-1983(Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.)
NF R13-107-1970(ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.)
NF E74-363-3-2001(Assembly tools for screws and nuts – Square drive sockets – Part 3 : machine-operated sockets (“non impact“) – Dimensions.)
NF E25-650-1-1994(Heat-treated steel tapping screws. Mechanical properties.)
NF E25-021-1994(Cross recesses for screws.)
NF L24-137-1997()
NF L22-222-1984(Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4G class.)
NF L22-070-1976(CROSS RECESS (B.N.A.E.).)
NF E25-601-1984(CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FZ.)
NF L22-071-1976(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
NF E04-012-2-1996(TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART 2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-2).)
NF E74-353-3-2002(Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3 : screwdriver bits for hexagon socket screws.)
NF L24-183-1996(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2885).)
NF L22-251-1968(GENERAL PURPOSE 100 DEGREES COUNTERSUNK HEAD SCREWS WITH A.I.C.M.A. CROSS RECESS.)
NF E25-023-1992(Fasteners. Clearance hole for bolts and screws.)
NF L22-140-1984(Bolt, hexagonal head, threaded to head.)
NF E25-132-1986(SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.)
NF L22-188-1976(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF L22-141-1984(Bolt, hexagonal head, with locking hole, threaded to head.)
NF E02-316-1981(STEEL GAUGES. METRIC TAPER RING GAUGES.)
NF E25-114-2001(Hexagon head bolts – Product grades A and B.)
NF E25-100-7-1995(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
NF E25-652-2001(Hexalobular socket countersunk head tapping screws.)
NF E22-203-1993(Ball screws. Part 3 : acceptance conditions and acceptance tests.)
NF L22-135-1975(Precision hexagon head bolts with split pin hole. Sim thread (rech.).)
NF L22-187-1976(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF L24-132-1996(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TMEPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2654).)
NF L24-115-1996(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM ECESS, THREADED TO HEAD, IN HEAT RESISTING TEEL E-PA92HT(A286),SILVERPLATED.CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2940).)
NF E25-110-2001(Hexalobular socket head cap screws.)
NF L22-173-1984(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.)
NF E74-360-2001(Assembly tools for screws and nuts – Drive ends for hand- and machine-operated screwdriver bits and connecting parts – Dimensions, torque testing.)
NF E25-610-1985(WOODSCREWS. SCREW-HOOKS.)
NF L24-385-1996(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L22-138-1984(Bolt, hexagonal head, close tolerance, short thread.)
NF L22-277-1968(DRILLED CHEESE HEAD SCREWS,FULLY THREADED,FOR TEMPERATURES ABOVE 260 DEGREES C.)
NF B51-128-1993(FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).)
NF L24-189-1997(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3759).)
NF S52-712-1994(Alpine skis. Ski binding srews. Test methods.)
NF L22-306-1977(HEXAGON SOCKET SET SCREWS,HALF DOG POINT. ISO THREAD.)
NF L22-147-1985(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.)
NF E62-526-2003(Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw.)
NF L22-161-1984(Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.)
NF E25-603-1984(CROSS RECESSED ROUND HEAD WOOD SCREWS. SYMBOL RZ.)
NF E25-800-2-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF L22-167-1984(Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.)
NF E74-323-1972(ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES)
NF L43-586-1972(PLUG-IN UNIONS,TUBE END. ISO THREAD PROFILE AND TOLERANCES.)
NF L24-180-1996(AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2650).)
NF E25-800-1-1994(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF L22-209-1984(Bolt, hexagonal head, with locking hole threaded to head. ISO thread.)
NF L24-186-1997(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).)
NF L22-168-1984(BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.)
NF L22-271-1966(AIRCRAFT FASTENERS. PAN HEAD SCREWS,WITH A.I.C.M.A. CROSS RECESS.)
NF S90-414-1988(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.)
NF E66-150-1990(Hand- An machine-operated circular screwing dies and hand-operated die stocks.)
NF F01-088-1971(RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH SLOTTED AND THREADED ENDS. SCREWS WITH DRILLED HEADS.)
NF E25-119-1-1994(Countersunk flat head screws (common head style) with type H or type Z cross recessed. Product grade A. Part 1 : steel of property class 4.8.)
NF E25-100-8-1998(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.)
NF E74-321-1998(ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.)
NF E25-851-1987(FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)
NF E25-133-1987(Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.)
NF J41-465-1957(SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)
NF L22-183-1976(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF L24-131-1996(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2653).)
NF L22-152-1975(Slotted mushroom head screws. Sim thread (rech.).)
NF E27-168-1976(LOCKING SCREW WITH 4 ARMED KNOB.)
NF E74-353-2-2002(Assembly tools for screws and nuts – Machine-operated screwdrivers bits – Part 2 : screwdriver bits for cross-recessed head screws.)
NF E27-215-1976(LOCKING SCREWS WITH HEXAGON NUT.)
NF C83-403-803-2003(Detail Specification : rectangular connectors – Flat contacts, 0,8 mm thickness, locking screw not detachable.)
NF E25-123-1994(Slotted countersunk flat head screws (common head style). Product grade A.)
NF E25-525-2000(Plain washers for metric bolts, screws and nuts for general purposes – General plan.)
NF L22-293-1979(SLOTTED CHEESE EHAD SCREWS,FULLY THREADED. ISO THREAD.)
NF E25-605-1984(Slotted raised countersunk head wood screws. Symbol FBS.)
NF L22-072-1991(Aerospace construction. Bolts and screws. 92 degrees cruciform recess.)
NF L22-259-1982(100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.)
NF L43-213-1973(DOUBLE UNIONS FOR CYLINDRICAL UNION.)
NF L22-184-1976(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF E25-100-6-1998(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
NF L22-258-1967(AIRCRAFT FASTENERS. PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,B.N.A.E. CROSS RECESS.)
NF E62-520-2003(Tools chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tools – Dimensions of chucks with 7/24 taper shank.)
NF E74-322-1972(ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.)
NF E82-020-1984(DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.)
NF L22-151-1975(Slotted and drilled cheese head screws. Sim thread (rech.).)
NF E74-363-1-1997(Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.)
NF E27-164-1976(LOCKING SCREW.)
NF E63-512-1983(MOULDING AND EXTRUSION EQUIPMENT. METALLIC MOULDING ELEMENTS. LOCKING SCREWS.)
NF E27-303-1968(SPHERICAL HOLED HEAD SCREW.)
NF E25-124-1994(Slotted raised countersunk head screws (common head style). Product grade A.)
NF E74-310-2001(Assembly tools for screws and nuts – Double-headed open-ended engineers’ wrenches – Length of wrenches and thickness of the heads.)
NF E25-650-2-1999(Tapping screw thread.)
NF E74-311-2001(Assembly tools for screws and nuts – Double-headed, flat and offset, box wrenches – Length of wrenches and thickness of the heads.)
NF L24-130-1997(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2652).)
NF E25-151-2001(Hexagon head screws with metric fine pitch thread – Product grades A and B.)
NF E25-100-3-1992(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).)
NF F03-004-1983(Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.)
NF L22-201-1984(Bolt, hexagonal head, short thread, close tolerance. ISO thread.)
NF E25-501-2000(Tolerances for fasteners – Part 3 : plain washers for bolts, screws and nuts – Product grades A and C.)
NF E62-519-2003(Tool chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tool – Part 1 : dimensions of the driving system of tool shanks.)
NF E25-011-1992(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
NF E25-611-1985(WOODSCREWS. SQUARE BEND SCREW HOOKS.)
NF E27-165-1976(SLIDE FOR LOCKING SCREW.)
NF L24-138-1997()
NF E25-115-2-2001(Hexagon head screws – Product grade C.)
NF F11-003-1970(RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.)
NF L22-221-1983(HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 H CLASS.)
NF L22-157-1975(Slotted mushroom head screws with cone point. Sim thread (rech.).)
NF E25-119-2-1994(Cross recessed countersunk flat head scews (common head style). Grade A. Part 2 : steel of property class 8.8, stainless steel and non-ferrous metals.)
NF E27-191-1983(FASTENERS. SHOULDERED RETAINING SCREWS.)
NF L22-205-1984(Bolt, hexagonal head, with cotter pin hole, current use. ISO thread.)
NF E25-609-1985(WOODSCREWS. SCREW-EYES.)
NF E27-166-1976(LOCKING SCREW WITH KNURLED KNOB.)
NF L24-113-1996(AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2938).)
NF E25-117-1983(Square head screws. Product grades A and B. Symbol Q.)
NF E22-202-1992(Ball screws. Part 2 : nominal diameters and nominal leads. Metric series.)
NF E25-108-2001(Hexalobular socket raised countersunk head screws.)
NF L22-142-1984(BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.)
NF E25-755-1997(Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.)
NF E74-361-1997(Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.)
NF L22-136-1984(Bolt, hexagonal head, current use, short thread.)
NF L24-109-1997(AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).)
NF L24-382-1996(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
NF L22-189-1976(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF L22-128-1985(Bolt, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4H class.)
NF E66-108-2000(Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in – Reduced shank taps.)
NF E74-363-2-1997(Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.)
NF S90-422-1989(IMPLANTS FOR SURGERY. METAL BONE PLATES. HOLES AND SLOTS CORRESPONDING TO SCREWS WITH CONICAL UNDER-SURFACE.)
NF F03-005-1983(Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.)
NF L22-156-1975(Slotted raised cheese head screws with cone point. Sim thread (rech.).)
NF L22-256-1966(AIRCRAFT FASTENERS. 100 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED,A.I.C.M.A. CROSS RECESS.)
NF C93-578-1996(Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type twhn).)
NF L22-127-1985(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.)
NF S90-512-1973(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH FLAT SLOTTED CHEESEHEAD FULLY THREADED.)
NF L22-274-1982(Pan head screws,B.N.A.E. Cross recess. ISO thread.)
NF E02-312-1981(STEEL GAUGES. MORSE TAPER RING GAUGES.)
NF L24-133-1997()
NF L22-202-1984(Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.)
NF E74-307-2001(Assembly tools for screws and nuts – Combination wrenches – Lengths of wrenches and maximum thickness of heads.)
NF E74-356-1993(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 : GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS.)
NF E25-150-1998(Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV.)
NF E25-666-1987(FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. SYMBOL CBL ZS.)
NF L22-169-1984(BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L 22-070,CROSS RECESS.)
NF L22-159-1975(Slotted raised 120 degrees countersunk head screws with cone point. Sim thread (rech.).)
NF L24-161-1997(AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3303).)
NF L22-171-1984(Bolt, pan head, current use, nf L22-072 cross recess.)
NF E74-304-2001(Assembly tools for screws and nuts – Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches – Maximum widths of heads.)
NF S52-734-1994(ALPINE SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.)
NF E27-854-1982(METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE,WITHOUT SCREWS,RE-USABLE,PIN OR AXLE CLAMPS.)
NF E25-134-1987(Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.)
NF E25-100-5-1998(Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.)
NF L22-125-1985(Bolt, hexagonal head, for tensile application, . ISO thread 4H class.)
NF E25-651-2003(Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4 : tapping screws.)
NF E25-120-1994(Countersunk raised head screws (common head style) with type H or type Z cross recessed. Product grade A.)
NF E25-022-1987(FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.)
NF E74-354-2002(Assembly tools for screws and nuts – Spiral ratchet screwdriver ends – Dimensions.)
NF L22-186-1976(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF E74-353-1-2002(Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1 : screwdriver bits for slotted head screws.)
NF L22-153-1975(Slotted 90 degrees countersunk head screws. Sim thread (rech.).)
NF E25-121-1994(Pan head screws with type H or type Z cross recess. Product grade A.)
NF L22-224-1984(Hexagonal socket cylindrical head screw, threaded to head, with hole for lockwire. ISO thread 4 G class.)
NF C20-116-1981(Terminals with screw campling for external copper conductors.)
NF L22-181-1976(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF E27-170-1974(GENERAL PURPOSE KNURLED THUMBS SCREWS.)
NF E25-659-1984(TAPPING SCREWS. CROSS RECESSED MUSHROOM HEAD (“POELIER“). SYMBOL RL Z.)
NF L22-207-1984(Bolt, hexagonal head, with locking hole, current use. ISO thread.)
NF E25-131-1986(SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.)
NF E66-120-1975(HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.)
NF E25-018-2-1994(CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).)
NF L24-222-1996(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
NF E25-664-1986(HEXAGON SLOTTED HEAD TAPPING SCREWS. SYMBOL HS.)
NF S52-735-1994(CROSS-COUNTRY SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.)
NF L22-122-1975(Hexagon head bolts with waisted shank with split pin hole. Sim thread.)
NF L22-177-1984(Bolt, pan head, current use, nf L 22-070 cross recess.)
NF S90-513-1973(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD AND FLANGE,PARTLY THREADED.)
NF E66-153-1990(Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)
NF L22-146-1985(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.)
NF L22-247-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS. FINE PITCH.)
NF L24-187-1997()
NF E25-126-1997(HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).)
NF L22-220-1984(Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4H class.)
NF F56-123-1980(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED SQUARE HEAD WOOD SCREWS.)
NF E25-655-1983(ROUND HEAD TAPPING SCREWS WITH SIX LOBES RECESS. SYMBOL RLX .)
NF L22-162-1984(Bolt, 100 degrees countersunk head, close tolerance, nf L 22-072 cross recess.)
NF E25-122-1984(SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCT GRADE A. SYMBOL RL Z.)
NF E25-130-1986(SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCT GRADE A.)
NF L24-188-1997(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).)
NF E25-149-1998(CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).)
NF E25-162-1992(SLOTTED SET SCREWS WITH LONG DOG POINT. (EUROPEAN STANDARD EN 27435).)
NF L22-309-1977(HEXAGON SOCKET SET SCREWS,TRUNCATED CONE POINT. ISO THREAD.)
NF E25-161-1992(SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).)
NF L24-386-1996(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
NF E74-331-2003(Assembly tools for screws and nuts – Hexagon socket screw keys.)
NF E74-355-1993(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.)
NF E25-654-2001(Hexalobular socket pan head tapping screws.)
NF L24-117-1996(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3007).)
NF E74-303-2001(Assembly tools for screws and nuts – Forged and tubular socket wrenches – Maximum outside head dimensions.)
NF E74-313-2001(Assembly tools for screws and nuts – Double-headed, deep offset and modified offset, box wrenches – Length of wrenches and thickness of the heads.)
NF L24-225-1996(Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
NF E74-366-1997(Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.)
NF E25-602-1984(CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FBZ.)
NF L24-231-1996(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
NF E22-201-1992(Ball screws. Part 1 : vocabulary and designation.)
NF E25-139-1987(FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.)
NF L24-114-1994(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 CELSIUSGRADE. (NORM EUROPEAN STANDARD EN 2939).)
NF R93-183-1980(MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.)
NF E25-610-1985(WOODSCREWS. SCREW-HOOKS.)
NF S91-129-1996(Dental extraction forceps. Part 1 : screw and pin joint types.)
NF E62-307-1977(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOP SCREW.)
NF E74-305-2001(Assembly tools for screws and nuts – Double-ended wrenches – Size pairings.)
NF E25-757-1997(Parallel pins with internal thread, of hardened steel and martensitic stainless steel.)
NF E25-658-1994(Cross recessed pan head tapping screws.)
NF L22-257-1982(General purpose 100 degrees countersunk head screws,B.N.A.E. Cross recess. ISO thread.)
NF E25-600-1984(FASTENERS. WOOD SCREWS FAMILY STANDARD.)
NF E25-100-1-1999(Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1 : bolts, screws and studs.)
NF L22-298-1979(HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED. ISO THREAD.)
NF L24-136-1997(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3306).)
NF L22-237-1989(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.)
NF L22-179-1984(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.)
NF E27-214-1976(LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.)
NF L22-158-1975(Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).)
NF L24-181-1996(AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TEMPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2651).)
NF E25-118-1983(Square head screws. Product grade C. Symbol Q.)
NF L24-134-1997()
NF C93-566-1981(ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL REQUIREMENTS.)
NF E74-352-1998(Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)
NF E25-756-1997(Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).)
NF L22-206-1984(Bolt, hexagonal head, current use. ISO thread.)
NF E25-022-1-2001(Tolerances for fasteners – Bolts, screws, studs and nuts – Part 1 : product grades A, B and C.)
NF E27-853-1989(Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications.)
NF L22-071-1976(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
NF E74-365-1997(Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.)
NF L22-296-1979(SLOTTED AND DRILLED CHEESE HEAD SCREWS,FULLY THREADED. ISO THREAD.)
NF E74-367-1995(Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.)
NF E04-012-3-1996(TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED PARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN STANDARD EN ISO 6410-3).)
STANDARDSDESCRIPTION
NF A35-057-1979(IRON AND STEEL. WIRE RODS MADE OF UNALLOYED STEEL FOR THE MANUFACTURE OF HIGH RESISTING COLD-FORMED SPRING WIRES. TYPES.)
NF P26-321-1998(BUILDING HARDWARE. CYLINDERS FOR LOCKS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1303).)
NF F01-046-1970(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. MOUNTED SPRINGS. TOLERANCES.)
NF F01-047-1974(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. SPRING LEAVES.)
NF E04-115-1996(Technical product documentation. Springs. Part 1 : simplified representation.)
NF S61-937-2-2003(Fire safety systems – Operated safety systems – Part 2 : Automatic closing swing doors.)
NF A37-611-2-2001(Steel wire for mechanical springs – Part 2 : oil hardened and tempered spring steel wire.)
NF E25-106-2-2002(Cylindrical helical springs made from round wire and bar – Calculation and design – Part 2 : extension springs.)
NF F01-048-1970(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. FLANGES. TOLERANCES. FUNCTIONAL DIMENSIONS.)
NF E25-101-1996(Technical product documentation. Springs. Part 2 : presentation of data for cylindrical helical compression springs.)
NF E63-134-1992(Tools for pressing. Elastomer pressure springs. Part 1 : general specification.)
NF F33-104-1981(RAILWAY TRANSPORT EQUIPMENT. FRAMES WITH OR WITHOUT BODY OF ARTICULATED WAGONS INCLUDING 3 INDEPENDENT AXLES AND LEAF SPRING SUSPENSION. DIMENSIONAL CHECKS. TOLERANCES.)
NF C93-562-1981(Components for electronic equipment. Miniature coaxial connectors with snap-on coupling. General requirements.)
NF D64-501-1965(DOMESTIC INTERIOR SPRUNG MATTRENESSES. CHARACTERISTICS. TESTS.)
NF F33-005-1986(ROLLING STOCK. LEAF SPRINGS. PARABOLIC SPRINGS.)
NF E62-301-1977(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : COVER,GUIDE AND SPRING.)
NF F33-102-1975(RAILWAY TRANSPORT EQUIPMENT. WAGON FRAMES WITH OR WITHOUT BODY WITH INDEPENDENT AXLES AND LEAF SPRING SUSPENSION. DIMENSIONAL CHECKS. TOLERANCES.)
NF F01-049-1974(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS : U.I.C. TYPE WEDGES. KEYS. CHOCKS.)
NF E25-106-3-2002(Cylindrical helical springs made from round wire and bar – Calculation and design – Part 3 : torsion springs.)
NF E25-775-1997(SPRING-TYPE STRAIGHT PINS. SLOTTED, LIGHT DUTY. (EUROPEAN STANDARD EN ISO 13337).)
NF E63-131-2-1996(Tools for pressing. Gas springs. Part 2 : specification of accessories.)
NF E25-104-1978(CONICAL SPRING WASHERS. DYNAMIC WASHERS (OR SO-CALLED BELLEVILLE SPING WASHERS).)
NF F33-006-1986(ROLLING STOCK. LEAF SPRINGS. LEAVES WITH VARIABLE CROSS-SECTION FOR PARABOLIC SPRINGS.)
NF M87-226-1-2002(Petroleum and natural gas industries – Casing centralizers – Part 1 : bow-spring casing centralizers.)
NF E62-309-1977(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. VERTICAL TEMPLATES 28 AND 36. SUPPORTS : COVER,GUIDE AND SPRING.)
NF E63-135-1992(Tools for pressing. Elastomer pressure springs. Part 2 : specification of accessories.)
NF A47-301-1976(IRON AND STEEL. ROUND SPRING STEEL WIRES. PATENTED DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.)
NF L46-614-2003(Aerospace series – Clips, spring tension, in alloy steel FE-PA3903.)
NF E25-512-1984(INTERNAL TOOTH CONICAL SPRING WASHERS. SYMBOL CDJ.)
NF E63-136-1992(Tools for pressing. Compression springs with rectangular section. Housing dimensions and colour coding.)
NF F01-816-2003(Railway applications – Rubber suspension components – Rubber diaphragms for pneumatic suspension springs.)
NF E73-130-1990(PLIERS AND NIPPERS. PLIERS FOR RETAINING RINGS.)
NF R47-203-1952(Spring leaves fastening bolts.)
NF C93-027-2003(Solderless connections – Part 7 : spring clamp connections – General requirements, test methods and practical guidance.)
NF E25-103-1977(TORSIONAL SPRINGS. INFORMATION TO BE SUPPLIED TO THE MANUFACTURER.)
NF P26-319-1997(BUILDING HARDWARE. ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1155).)
NF E25-510-1984(CONICAL SPRING WASHERS. SYMBOL CL.)
NF A35-587-2003(Stainless steel strip for springs – Technical delivery conditions.)
NF S82-501-1995(Horology. Watch spring-barrel springs. Quality classes.)
NF E25-105-1996(Technical product documentation. Springs. Part 3 : vocabulary.)
NF F01-033-1975(RAILWAY TRANSPORT EQUIPMENT. STEADY PINS FOR CENTERING LAMINATED SPRINGS IN GROOVED PLATES.)
NF E25-102-1977(TENSION SPRINGS. INFORMATION TO BE SUPPLIED TO THE MANUFACTURER.)
NF A37-611-1-2001(Steel wire for mechanical springs – Part 1 : patented cold drawn unalloyed spring steel wire.)
NF A51-203-1998(Copper and copper alloys – Strip for springs and connectors.)
NF A37-611-3-2001(Steel wire for mechanical springs – Part 3 : stainless spring steel wire.)
NF F80-108-1980(RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. VIII : SPRING STEELS.)
NF E63-141-1992(TOLLS FOR PRESSING. SPRING EJECTOR.)
NF E25-511-1984(SERRATED CONICAL SPRING WASHERS. SYMBOL CS.)
NF A45-042-1983(Iron and steel. Hot rolled grooved spring steel. Dimensions and tolerances.)
NF L54-002-056-1998(Aerospace series. Elements of electrical and optical connection. Test methods. Part 413 : holding force or grounding spring system.)
NF A45-041-1984(HOT-ROLLED FLATS WITH ROUND EDGES FOR SPRING LEAVES. DIMENSIONS AND TOLERANCES.)
NF A35-571-2003(Hot-rolled steels for quenched and tempered springs – Technical delivery conditions.)
NF S86-501-2002(Timekeeping instrument – Wristwatch-cases – Fixing dimensions of non-spring-bar types.)
NF F18-805-1992(RAILWAY ROLLING STOCK. RUBBER DIAPHRAGMS FOR PNEUMATIC SUSPENSION SPRINGS.)
NF A45-040-1984(HOT-ROLLED FLATS WITH ROUND EDGES FOR SPRING LEAVES. DIMENSIONS AND TOLERANCES.)
STANDARDSDESCRIPTION
NF J37-311-1946(SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR ENLARGED AND END LINKS.)
NF J37-405-1990(Small craft. Anchor chains.)
NF J37-310-1946(SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR COMMON LINKS.)
EN 353-2-2002Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line
NF J37-360-1946(SHIPBUILDING. ANCHOR CABLES. CABLE ENDS WITH OR WITHOUT SWIVEL LINK.)
NF J37-272-1953(SHIPBUILDING. HAWSE-HOLES. ELLIPTICAL TYPE.)
NF J37-380-1946(SHIPBUILDING. ANCHOR CABLES. CLINCHER LINK.)
NF S71-502-1-2002(Personal protective equipment against falls from a height – Part 1 : guided type fall arresters including a rigid anchor line.)
NF S71-502-2-2002(Personal protective equipment against falls from a height – Part 2 : guided type fall arresters including a flexible anchor line.)
NF P94-321-2000(Execution of special geotechnical work – Ground anchors.)
NF S52-346-1996(MOUNTAINEERING EQUIPMENT. ROCK ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 959).)
NF S83-202-1995(Horology. Pallet escapements. Ebauche uprighting.)
NF S52-342-1998(MOUNTAINEERING EQUIPMENT. CHOCKS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 12270).)
NF F56-001-1985(FIXED RAILWAY EQUIPMENT. MATERIAL FOR TELECOMMUNICATION AND SIGNALLING OVERHEAD LINES. KEYING-PLATE AND ANCHOR-PLATE.)
EN 568-1997Mountaineering equipment – Ice anchors – Safety requirements and test methods
NF J37-280-1953(SHIPBUILDING. HAWSE-HOLES. “PANAMA“ TYPE.)
NF J37-320-1946(SHIPBUILDING. ANCHOR CABLES. LINKS.)
NF L24-472-1996(AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).)
NF S52-347-1997(MOUNTAINEERING EQUIPMENT. ICE ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 568).)
NF J37-264-1956(SHIPBUILDING. HAWSER GUIDES. ROLLER BRACKET.)
NF J84-416-2002(Inland navigation vessels – Anchoring, coupling, towing, hauling and mooring systems.)
NF S71-513-1996(PROTECTION AGAINST FALLS FROM A HEIGHT. ANCHOR DEVICES. REQUIREMENTS AND TESTING. (EUROPEAN STANDARD EN 795).)
EN 13573-2001Inland navigation vessels – Anchoring, coupling, towing, hauling and mooring systems
NF S83-201-1995(Horology. Pallet escapements. Wheels, pallets, trays.)
NF J37-370-1946(SHIPBUILDING. ANCHOR CABLES. COMMON LINK AND STAPLE LINK.)
NF F56-159-1978(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. PLATES FOR ANCHORING BARS.)
NF S52-361-1998(MOUNTAINEERING EQUIPMENT. FRICTIONAL ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 12276).)
NF J37-292-1983(Yachting. Fairleads for rigging. Interchangeability dimensions.)
NF E27-816-1998(Anchor bolts. Fitness for use tests.)
NF J37-300-1946(SHIPBUILDING. ANCHOR CABLES. GENERAL REQUIREMENTS.)
NF J37-263-1956(SHIPBUILDING. HAWSER GUIDES. CLEAT FOR HORIZONTAL ROLLERS.)
NF J37-330-1946(SHIPBUILDING. ANCHOR CABLES. JOINING SHACKLES.)
NF S71-513/A1-2000(Protection against falls from a height – Anchor devices – Requirements and testing.)
NF S83-203-1995(Horology. Pallet escapements. Relative height of components.)
NF J37-274-1953(SHIPBUILDING. HAWSE-HOLES. CIRCULAR TYPE.)
NF P95-301-1994(AVALANCHE PROTECTION SYSTEMS. PASSIVE CONCENTRATED ANCHORAGES FOR SOFT GROUND. PULL OUT TESTS METHOD.)
NF J37-262-1956(SHIPBUILDING. HAWSER GUIDES. ROLLER AND CLEAT. ASSEMBLY.)
NF J37-230-1956(SHIPBUILDING. FAIRLEADS AND GUIDES FOR HAWSERS. GENERAL REQUIREMENTS.)
EN 959-1996Mountaineering equipment – Rock anchors – Safety requirements and test methods
NF J95-064-2003(Small craft – Anchoring, mooring and towing – Strong points.)
EN 24565-1989Small craft – Anchor chains (ISO 4565:1986)
NF J37-260-1956(SHIPBUILDING. HAWSER GUIDES. ASSEMBLY.)
NF J37-340-1946(SHIPBUILDING. ANCHOR CABLES. KENTER SYSTEM JOINING SHACKLES.)
NF R10-114-1-2000(Road vehicles – Anchorages in vehicles and attachments to anchorages for child restraint systems – Part 1 : seat bight anchorages and attachments.)