DIN Standards

STANDARDSDESCRIPTION
DIN ISO 4095-1980Aerospace; fasteners for aerospace construction, bi-hexagonal wrenching configuration
DIN 43835-1971Fastening for indicating instruments; fastening component, cone-rivets at the case, mounting arrangement
DIN 74361-2-1982Disc wheels for motor vehicles and trailers; fasteners for stud centring
DIN EN ISO 898-5-1998Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998
DIN 4000-161-2007Tabular layout of product properties – Part 161: Fasteners with internal thread
DIN 65428-1987Aerospace; sleeves; wall thickness 0,25 mm, for fasteners with protruding head
DIN EN ISO 898-6-1996Mechanical properties of fasteners – Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995
DIN EN 912-2001Timber fasteners – Specifications for connectors for timber (includes corrigendum AC:2000); German version EN 912:1999 + AC:2000
DIN EN 20225-1992Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
DIN EN ISO 16426-2003Fasteners – Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002
DIN EN 4174-2006Aerospace series – Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series; German and English version EN 4174:2006
DIN 65489-1993Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer
DIN 969-1997Threaded fasteners – Axial load fatigue testing – Test methods and evaluation of results
DIN EN 26157-3-1991Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN 65486-1993Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight
DIN EN 10269 Berichtigung 2-2007Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:1999 + A1:2006, Corrigenda to DIN EN 10269:2006-07
DIN ISO 1891-1979Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
DIN EN 28839-1991Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
DIN 65492-1993Aerospace; fasteners for structural application; rotary fasteners; receptacle
DIN 918-1979Fasteners; Terminology; Spelling of terms; Abbreviations
DIN 65434-1987Aerospace; sleeves; wall thickness 0,5 mm, for fasteners with reduced countersunk head
DIN EN ISO 3269-2000Fasteners – Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000
DIN 65430-2002Aerospace – Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head
DIN EN 1382-2000Timber structures – Test methods – Withdrawel capacity of timber fasteners; German version EN 1382:1999
DIN 3133-1984Toggle-type fasteners; salient; with elongated base plate
DIN EN ISO 3506-4-2003Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003
DIN ISO 272-1979Fasteners; Width across Flats for Hexagon Products
DIN 65435-1989Aerospace; sleeves for fasteners; technical specification
DIN 267-2-1984Fasteners; technical delivery conditions; design and dimensional accuracy
DIN EN ISO 6157-2-2004Fasteners – Surface discontinuities – Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
DIN 267-29-1993Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
DIN 65151-2002Aerospace series – Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test)
DIN EN ISO 4759-3-2000Tolerances for fasteners – Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
DIN EN ISO 12777-1-1996Methods of test for pallet joints – Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994); German version EN ISO 12777-1:1996
DIN 918 Bb.3-2005Fasteners – European Standards – Survey
DIN 65485-1993Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly
DIN ISO 7913-1986Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
DIN EN 792-6-2001Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners; German version EN 792-6:2000
DIN EN 383-2007Timber Structures – Test methods – Determination of embedment strength and foundation values for dowel type fasteners; German version EN 383:2007
DIN EN ISO 1120-2002Conveyor belts – Determination of strength of mechanical fastenings – Static test method (ISO 1120:2002); German version EN ISO 1120:2002
DIN 6885-3-1956Drive Type Fastenings without Taper Action; Parallel Keys, Shallow Pattern, Dimensions and Application
DIN EN ISO 16047-2005Fasteners – Torque/clamp force testing (ISO 16047:2005); German version EN ISO 16047:2005
DIN 68163-1982Fasteners for assembling timber pallets; nails
DIN 267-6-1975Fasteners and similar parts; technical specifications, finishes and tolerances for product grade F
DIN EN ISO 16048-2003Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003
DIN ISO 8788-1988Aerospace; fasteners; tolerances of form and position for nuts; identical with ISO 8788, edition 1987
DIN EN 28970-1991Timber structures; testing of joints made with mechanical fasteners; requirements for wood density (ISO 8970:1989); german version EN 28970:1991
DIN 65429-2002Aerospace – Sleeves, wall thickness 0,5 mm, for fasteners with protruding head
DIN CEN/TS 15087-2006Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing – Test method for mechanical fasteners; German version CEN/TS 15087:2005
DIN 267-26-2005Fasteners – Technical specifications – Part 26: Conical spring washers for bolted connections
DIN EN 792-1-2001Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners; German version EN 792-1:2000
DIN EN 14831-2005Fasteners – Tightening performance – Torque/Angle simplified test method; German version EN 14831:2005
DIN 6892-1998Drive type fastenings without taper action – Parallel keys – Calculation and design
DIN EN ISO 898-1-1999Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
DIN 267-24-2007Fasteners – Technical delivery conditions – Part 24: Hardness classes for nuts without specified proof load values
DIN EN ISO 4042-2001Fasteners – Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999
DIN 65493-1993Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight
DIN 6886-1967Stressed-type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application
DIN ISO 5845-2-1997Technical drawings – Simplified representation of the assembly of parts with fasteners – Part 2: Rivets for aerospace equipment (ISO 5845-2:1995)
DIN 65487-1993Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head
DIN EN ISO 4759-1-2001Tolerances for fasteners – Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
DIN EN ISO 3506-2-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997
DIN EN 792-13-2001Hand-held non electric power tools – Safety requirements – Part 13: Fastener driving tools; German version EN 792-13:2000
DIN 74361-3-1979Disc wheels for motor vehicles and trailers; dimensions and fasteners for attachment with centring on wheel bore
DIN 65433-2002Aerospace – Sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head
DIN EN 12549-1999Acoustics – Noise test code for fastener driving tools – Engineering method; German version EN 12549:1999
DIN ISO 5845-1-1997Technical drawings – Simplified representation of the assembly of parts with fasteners – Part 1: General principles (ISO 5845-1:1995)
DIN EN ISO 15330-2000Fasteners – Preloading test for the detection of hydrogen embrittlement – Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999
DIN EN ISO 3506-1-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997
DIN 6885-1-1968Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern
DIN 29895-2-1989Aerospace; alternative materials for fasteners; solid rivets
DIN 65488-1993Aerospace; fasteners for structural application; rotary fasteners; installation dimensions
DIN 6887-1968Stressed-type Fastenings with Taper Action; Taper Keys with Gip Head, Keyways, Dimensions and Application
DIN 4000-160-2007Tabular layout of product properties – Part 160: Fasteners with external thread
DIN EN ISO 3506-3-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997
DIN EN 12512-2005Timber structures – Test methods – Cyclic testing of joints made with mechanical fasteners; German version EN 12512:2001 + A1:2005
DIN EN ISO 10964-1997Adhesives – Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993); German version EN ISO 10964:1997
DIN EN 10269-2006Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (includes Amendment A1:2006 and Corrigenda Ber 1:2006-10 + Ber 2:2007-02); English version of DIN EN 10269:2006-07
DIN EN 26891-1991Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991
DIN 65431-2002Aerospace – Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head
DIN 3134-1984Toggle-type fasteners; with and without locking eye
DIN EN 14250-2005Timber structures – Product requirements for prefabricated structural members assembled with punched metal plate fasteners; German version EN 14250:2004
DIN EN 20273-1992Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
DIN EN 1414-2000Touch and close fasteners – Cycling procedure for subsequent testing (includes Amendment A1:2000); German version EN 1414:1996 + A1:2000
DIN EN 26157-1-1991Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
DIN 29895-1984Aerospace; alternative materials for fasteners
DIN 48069-1-1977Double eyes without protective fitting attachment, for overhead power lines
DIN EN 1383-2000Timber structures – Test methods – Pull through resistance of timber fasteners; German version EN 1383:1999
DIN EN 20898-7-1995Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
DIN EN ISO 4753-2000Fasteners – Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999
DIN 6885-2-1967Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and Application
DIN 34804-2002Fasteners – Change of appearance of black surfaces
DIN EN 1075-2000Timber structures – Test methods – Joints made with punched metal plate fasteners; German version EN 1075:1999
DIN EN 13271-2004Timber fasteners – Characteristic load-carrying capacities and slip-moduli for connector joints; German version EN 13271:2001 + AC:2003
DIN EN ISO 10683-2001Fasteners – Non-electrolytically applied zinc flake coatings (ISO 10683:2000); German version EN ISO 10683:2000
DIN 267-13-2007Fasteners – Technical specifications – Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C
DIN EN ISO 10684-2004Fasteners – Hot dip galvanized coatings (ISO 10684:2004); German version EN ISO 10684:2004
DIN EN ISO 898-5 Berichtigung 1-2007Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10
DIN 267-27-2004Fasteners – Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications
DIN 267-28-2004Fasteners – Part 28: Steel screws, bolts and studs with locking coating; Technical specifications
DIN ISO 8992-2005Fasteners – General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
DIN EN 13446-2002Wood-based panels – Determination of withdrawal capacity of fasteners; German version EN 13446:2002
DIN 6888-1956Drive Type Fastenings without Taper Action; Woodruff Keys, Dimensions and Application
DIN 3132-1984Toggle-type fasteners; salient, with short base plate
DIN EN 10269 Berichtigung 1-2006Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, German version EN 10269:1999 + A1:2006, Corrigenda to DIN EN 10269:2006-07; German version EN 10269:1999/A1:2006/AC:2006
DIN EN 50180 Bb.2-2001Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers – Constructional details of fastening
DIN 267-30-2001Fasteners – Technical delivery conditions – Part 30: Metric thread rolling screws of property class 10.9
DIN EN 20898-2-1994Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993
STANDARDSDESCRIPTION
DIN 1595-1978Knobs and knobbed screws for rail vehicles
DIN 78-2001Protrusions of bolt ends
DIN 267-26-2005Fasteners – Technical specifications – Part 26: Conical spring washers for bolted connections
DIN 65736-7-1984Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.6604.6
DIN ISO 1891-1979Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
DIN EN 3052-1994Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C (includes amendment A1:1993); German version EN 3052:1993 + A1:1993
DIN EN 2935-1996Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996
DIN 74362-10-1980Brake drums for inset disk wheels of commercial vehicles and their trailers with 10 bolt fastening; maximum outline
DIN 43675-1-1975Rectangular-section connectors for terminal studs rated between 400 and 3150 A for power transformer- and wallbushings below 60 kV
DIN 74362-5-1982Brake drums for offset disc wheels of commercial vehicles with 10 bolt mounting; maximum outline
DIN EN ISO 6149-2-2007Connections for hydraulic fluid power and general use – Ports and stud ends with ISO 261 metric threads and O-ring sealing – Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version EN ISO 6149-2:2007
DIN 931-2-1987M 42 to M 160 × 6 hexagon head bolts; product grade B
DIN 609-1995Hexagon fits bolts with long thread
DIN 580-2003Eye bolts
DIN 65736-3-1984Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.7220.5
DIN EN 2936-1996Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996
DIN EN 1515-3-2005Flanges and their joints – Bolting – Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005
DIN V 4001-11 Bb.1-1992CAD standard parts library; specification of geometrie and parameters; hexagon head bolts
DIN V 4001-201-1990CAD standard parts file; specifications of geometry and parameters; head screws, with plain sitting surface, with drive internal by tool
DIN 74362-2-1982Brake drums for offset disc wheels of truck and bus trailers with 10 bolt mounting; maximum outline
DIN 58461-1978Studs with rim for fine mechanics
DIN 48078-1-1985Clevis straps for overhead lines, for coupling to connecting bolts on the strap side
DIN EN 4352-2006Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated – Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004
DIN EN 4498-2007Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German and English version EN 4498:2005
DIN 58471-1978Studs with hexagon, thread and groove for fine mechanics
DIN 940-1995Studs – Metal end 2,5 d
DIN 65527-1984Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C
DIN 58469-1978Studs with thread for fine mechanics
DIN 65736-1-1984Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.1174.7 and 1.4544.9
DIN 46295-3-1981Terminal board, square shaped with six slit-bolts; cable sockets
DIN 6306-2002Tommy screws with movable clamping bolt
DIN EN ISO 4759-1-2001Tolerances for fasteners – Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
DIN 46295-2-1981Terminal board, square shaped with six slit-bolts; accessories
DIN EN 14219-2003Hexagon bolts with flange with metric fine pitch thread – Small series (ISO 15072:1999, modified); German version EN 14219:2003
DIN 11028-1999Agricultural tractors and machinery – Trailer coupling – Bolt coupling for coupling-ring 40
DIN EN 10319-2-2007Metallic materials – Tensile stress relaxation testing – Part 2: Procedure for bolted joint models; English version of DIN EN 10319-2:2007-01
DIN 58460-1978Studs for fine mechanics
DIN 74361-1-1989Disc wheels for motor vehicles and trailers; connection dimensions for bolt centering
DIN 74363-1-1982Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 112 mm (BZ 5 112); maximum outline
DIN 95363-1994Elastomer mounts; stud mounts; types A to F
DIN 529-1986Masonry and foundation bolts
DIN 25201-4-2004Design guide for railway vehicles and their components – Bolted joints – Part 4: Securing of bolted joints
DIN 3903-2001Non soldering compression fittings with cutting ring – Elbow stud with taper threaded stud end (not for new design)
DIN EN 3907-2006Aerospace series – Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated – Classification: 1100 MPa (at ambient temperature)/350 °C: German and English version EN 3907:2004
DIN 2510-5-1971Bolted Connections with Reduced Shank; Hexagon Nuts
DIN 604-1981Flat countersunk nib bolts
DIN 65541-1987Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 48065-3-1980Ball eyes with protective fitting attachment, for connection bolts, for overhead power lines
DIN EN 3202-1996Aerospace series – Holes and traps for T-head bolts – Design standard; German version EN 3202:1995
DIN 65554-1987Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 2510-8-1971Bolted Connections with Reduced Shank; Threaded Holes for Studs
DIN V 74052-10-1989Mechanical connections between towing vehicles and trailers; automatic bolt coupling 50; additional specifications for the use with centre axle trailers
DIN EN 3724-2005Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated – Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004
DIN 6917-1989Square taper washers for high-strength structural bolting of steel I sections
DIN 1211-3-2003Step irons for staggered manhole steps – Part 3: Bolted-on step irons
DIN EN ISO 3506-1-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997
DIN 25193-2003Railway vehicles – Mushroom head anchor screws with metric ISO thread – Class C
DIN EN 1662 Berichtigung 1-2007Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997, Corrigenda to DIN EN 1662:1998-02; German version EN 1662:1997/AC:2007
DIN 65320-1993Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 28602-2000Ductile iron pipes and fittings – Bolted gland joints – Assembly, sockets, counter ring, sealing ring, bolts and nuts
DIN 46260-1-1988Low-voltage stud-terminals; compilation
DIN EN 15282-2007Vitreous and porcelain enamels – Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges; German version EN 15282:2007
DIN 2510-1-1974Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation
DIN EN 3009-1998Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998
DIN 65110-1984Aerospace; bihexagonal heads for screws and bolts
DIN EN ISO 9974-2-2000Connections for general use and fluid power – Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing – Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000
DIN 797-1970Special Foundation Bolts
DIN 267-29-1993Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
DIN 43142-1976Contact wire clamps for screwbolts, for grooved contact wire
DIN 7968-2007Hexagon fit bolts with hexagon nut for steel structures
DIN 7999-1983High strength hexagon fit bolts with large widths across flats for structural steel bolting
DIN EN 3832-2005Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004
DIN 43043-2-1971Double clamping brush-holder with 3 bolts for electrical machinery; main dimensions
DIN 475-1-1984Widths across flats for bolts, screws, valves and fittings
DIN 65736-5-1984Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.4944.4 and 1.7734.5
DIN 267-13-2007Fasteners – Technical specifications – Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C
DIN 7644-1985Compression couplings with spherical liner; male studed banjo bolts for ring type nipples
DIN EN 14219 Berichtigung 1-2007Hexagon bolts with flange with metric fine pitch thread – Small series (ISO 15072:1999, modified); German version EN 14219:2003, Corrigenda to DIN EN 14219:2003-09; German version EN 14219:2003/AC:2007
DIN ISO 7913-1986Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
DIN 74361-2-1982Disc wheels for motor vehicles and trailers; fasteners for stud centring
DIN EN ISO 10434-2005Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004); German version EN ISO 10434:2004
DIN EN 3010-1998Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification 1210 MPa/730 °C; German version EN 3010:1998
DIN 46262-1-1988Low-voltage stud-terminals; insulators
DIN 65537-1987Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 74362-7-1987Brake drums for disc wheels with rim diameter designation 15 without offset for 6 or 10 bolt mounting, maximum outline
DIN EN 1665 Berichtigung 1-2007Hexagon bolts with flange, heavy series; German version EN 1665:1997, Corrigenda to DIN EN 1665:1998-11; German version EN 1665:1997/AC:2007
DIN EN 2934-1996Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996
DIN 25201-2 Berichtigung 1-2007Design guide for railway vehicles and their components – Bolted joints – Part 2: Design – Mechanical application, Corrigenda to DIN 25201-2:2006-04
DIN EN 14399-5-2006High-strength structural bolting assemblies for preloading – Part 5: Plain washers (includes AC:2006) English version of DIN EN 14399-5:2006-06
DIN 74362-1-1982Brake drums for offset disc wheels of truck and bus trailers with 8 bolt mounting; maximum outline
DIN EN 3379-1996Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996
DIN EN 26157-3-1991Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN 65443-1984Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 °C
DIN 3955-2001Non-soldering compression fittings with cutting ring – Double ended stud ends with parallel threads and shaft for stud ends type A
DIN 21346-1989Square head bolts for shaft guides
DIN 7992-1970T-head Bolts with Large Head
DIN EN ISO 6149-3-2007Connections for hydraulic fluid power and general use – Ports and stud ends with ISO 261 metric threads and O-ring sealing – Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version EN ISO 6149-3:2007
DIN EN ISO 9974-3-2000Connections for general use and fluid power – Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing – Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000
DIN 480-1985Square head bolts with collar and oval half dog point
DIN 74363-2-1982Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 120 mm (BZ 5 120); maximum outline
DIN 25201-7 Berichtigung 1-2007Design guide for railway vehicles and their components – Bolted joints – Part 7: Installation, Corrigenda to DIN 25201-7:2004-06
DIN EN 15048-1-2007Non-preloaded structural bolting assemblies – Part 1: General requirements; German version EN 15048-1:2007
DIN 65316-1993Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 65555-1987Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 478-1985Square head bolts with collar
DIN 46262-4-1988Low-voltage stud-terminals; snap rings, shackles, washers, shims
DIN V 4001-204-1990CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive internal by tool
DIN 974-2-1991Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
DIN EN 20898-7-1995Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
DIN 46300-1980Mounting material; mounting bolt for electric meters and controlgear on meter panels
DIN EN 3912-2007Aerospace series – Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3912:2007
DIN EN 3011-1998Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification 1210 MPa/730 °C; German version EN 3011:1998
DIN 65268-1986Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 46008-1987Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV
DIN EN 4311-2007Aerospace series – Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006
DIN 949-1-1995Studs with metric interference thread MFS – Part 1: Lengths of engagement 2 d (Type A)
DIN 43119-2-1983Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread
DIN EN 4312-2007Aerospace series – Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4312:2006
DIN EN 4495-2007Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006
DIN 2510-4-1971Bolted Connections with Reduced Shank; Studs
DIN 58520-1-1994Screws for drawing instruments; part 1: T-bolts
DIN 65516-1984Aerospace; cheese head bolts with internal serration thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 65179-1993Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 74051-1-1989Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; dimensions and calculating data
DIN EN 2925-1994Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2925:1994
DIN 25201-2-2006Design guide for railway vehicles and their components – Bolted joints – Part 2: Design – Mechanical application
DIN EN ISO 6149-1-2007Connections for hydraulic fluid power and general use – Ports and stud ends with ISO 261 metric threads and O-ring sealing – Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006); German version EN ISO 6149-1:2007
DIN EN 4321-2006Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004
DIN 74362-8-1987Brake drums for offset disc wheels rim diameter designation 15 for 6 or 10 bolt mounting; maximum outline
DIN 65121-1992Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
DIN 25201-5-2005Design guide for railway vehicles and their components – Bolted joints – Part 5: Protection against corrosion
DIN EN 14399-4-2006High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies English version of DIN EN 14399-4:2006-06
DIN 6307-2002Tommy nuts with movable clamping bolt
DIN 18069-1985Stairs with load-bearing bolts for residential buildings; design and execution
DIN 20625-1-1992Capture-track rail installations in mining; bolted couplings for rope-hauled and self-propelled rail installations; bolted coupling 30
DIN ISO 5855-2-1989Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988
DIN 65524-1984Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 444-1983Eyebolts
DIN EN 28839-1991Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
DIN 65324-1993Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN ISO 9152-2005Aerospace – Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa – Procurement specification (ISO 9152:1998)
DIN V 4001-901-1988CAD standard parts file; specification of geometry and parameters; bolts and pins with shoulders
DIN 1212-3-2003Step irons with upstand for staggered manhole steps – Part 3: Bolted-on step irons
DIN 1441-1974Washers; Type Coarse for Bolts
DIN 22424-1990Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts
DIN 74052-1-1989Mechanical connections between towing vehicles and trailers; automatic bolt coupling 50; dimensions and calculating data
DIN 48351-2-1967A-masts; bolts, nuts, washers
DIN EN 4322-2006Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated – Strength class: 1100 MPa (at ambient temperature): German and English version EN 4322:2004
DIN 7990-2007Hexagon head bolts with hexagon nut for steel structures
DIN 65314-1998Aerospace – Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel – Nominale tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 74362-6-1982Brake drums for disc wheels without offset of commercial vehicles with 8 or 10 bolt mounting; maximum outline
DIN EN 4173-2006Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4173:2006
DIN 787-2005Bolts and screws for T-slots
DIN 186-1988T-head bolts with square neck
DIN EN 1515-1-2000Flanges and their joints – Bolting – Part 1: Selection of bolting; German version EN 1515-1:1999
DIN 6304-2002Tommy screws with fixed clamping bolt
DIN EN 14399-3-2006High-strength structural bolting assemblies for preloading – Part 3: System HR – Hexagon bolt and nut assemblies English version of DIN EN 14399-3:2006-06
DIN 29732-3-1984Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear
DIN 65523-1984Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C
DIN 34824-200712 point socket for bolts and screws
DIN 605-1981Flat countersunk square neck bolts, with long square
DIN EN 3008-1998Aerospace series – Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa/650 °C; German version EN 3008:1998
DIN EN ISO 4759-3-2000Tolerances for fasteners – Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
DIN EN 3444-2007Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated – Classification: 1250 MPa (at ambient temperature)/650 °C; German and English version EN 3444:2006
DIN EN ISO 898-1-1999Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
DIN EN 20273-1992Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
DIN 3853-2001Non-soldering and soldering compression fittings – Stud ends for use with union nut; Design sheet
DIN 65115-1986Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 25192-1978T-head bolts (hammer head bolts) for railway vehicles
DIN 267-27-2004Fasteners – Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications
DIN 65441-1984Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 °C
DIN EN ISO 8765-2001Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765:1999); German version EN ISO 8765:2000
DIN 34801-1999Bolts and screws with external hexalobular driving feature with large flange
DIN EN 74-1-2005Couplers, spigot pins and baseplates for use in falsework and scaffolds – Part 1: Couplers for tubes – Requirements and test procedures; German version EN 74-1:2005
DIN ISO 8992-2005Fasteners – General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
DIN 65319-1987Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 2510-6-1974Bolted Connections with Reduced Shank; Cap Nuts
DIN 43675-2-1984Connectors for terminal studs; flat connectors for outdoor transformer bushings; U<(Index)m> 24 and 36 kV, 5 and 8 kA
DIN 2510-2-1971Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
DIN 37082-1975Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt
DIN 976-1-2002Stud bolts – Part 1: Metric thread
DIN 65338-1993Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN EN 26157-1-1991Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
DIN EN 3833-2005Aerospace series – Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated – Classification: 1550 MPa (at ambient temperature)/ 650 °C – Technical specification; German and English version EN 3833:2004
DIN ISO 262-1999ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts (ISO 262:1998)
DIN 3913-2001Non soldering compression fittings with cutting ring – Run T-stud with taper threaded stud end (not for new design)
DIN 65442-1993Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 °C
DIN 25201-7-2004Design guide for railway vehicles and their components – Bolted joints – Part 7: Installation
DIN 25200-1997Screws, bolts and nuts for rail vehicles – Summary
DIN 188-1987T-head bolts with double nib
DIN 976-2-1995Stud bolts – Part 2: Metric interference thread MFS
DIN 65339-1998Aerospace – Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel – Nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 43167-2-1987Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt
DIN 7969-2007Slotted countersunk head bolts with hexagon nut for steel structures
DIN ISO 16030-2007Pneumatic fluid power – Connections – Ports and stud ends (ISO 16030:2001 + Amd. 1:2005)
DIN 6305-2002Tommy nuts with fixed clamping bolt
DIN 949-2-1995Studs with metric interference thread MFS – Part 2: Lengths of engagement 2,5 d (Type B)
DIN 25201-6-2005Design guide for railway vehicles and their components – Bolted joints – Part 6: Connecting dimensions
DIN 65330-1987Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 603-1981Mushroom head square neck bolts
DIN 58463-1978Studs with rim and groove for fine mechanics
DIN EN 4402-2007Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006
DIN 21319-1989Round pit timber; bolts
DIN EN 2413-1995Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995
DIN 65439-1984Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C
DIN EN 1662-1998Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997
DIN 65438-1993Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN CEN/TS 1591-4-2007Flanges and their joints – Design rules for gasketed circular flange connections – Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007
DIN 46262-2-1988Low-voltage stud-terminals; bushing studs
DIN 22416-1986Electrical apparatus for potentially explosive atmospheres in mining; triangular head bolts; safety requirements and testing
DIN EN 4009-2006Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004
DIN 81698-1973Eye bolts; metric thread
DIN 6796-1987Conical spring washers for bolt/nut assemblies
DIN 74362-4-1982Brake drums for offset disc wheels of commercial vehicles with 8 bolt mounting; maximum outline
DIN 65440-1984Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 °C
DIN 11014-1968Agricultural equipment; countersunk double-nip bolts, sinkings, metric thread, finish
DIN 939-1995Studs – Metal end 1,25 d
DIN ISO 885-2001General purpose bolts and screws – Metric series – Radii under the head (ISO 885:2000)
DIN EN 12051-1999Building hardware – Door and window bolts – Requirements and test methods; German version EN 12051:1999
DIN 65318-1987Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C
DIN EN 2859-1995Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2859:1995
DIN 65515-1984Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN EN 1450-1999Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) components – Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998
DIN 46200-1977Current carrying connection bolts up to 1600 A; design and assignment of current intensities
DIN V 4001-902-1988CAD standard parts file; specification of geometry and parameters; bolts and pins with head
DIN 25195-2003Railway vehicles – Countersunk bolts with double nip with metric ISO thread – Class C
DIN EN 24015-1991Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991
DIN 26029-1-1986Tank wagons; vent holes and drain plugs on pressurized gas tank wagons with bottom discharge
DIN EN ISO 9974-1-2000Connections for general use and fluid power – Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing – Part 1: Threaded ports (ISO 9974-1:1996); German version EN
DIN ISO 691-2007Assembly tools for screws and nuts – Wrench and socket openings – Tolerances for general use (ISO 691:2005) English version of DIN ISO 691:2007-04
DIN 43675-3-1975Rectangular-section connectors for terminal studs rated over, 3150 A, for alternator-bushings
DIN 7424-1989Socket wrenches with hexagon drive extension for hexagon bolts, machine operated
DIN EN 2931-1994Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2931:1994
DIN 22412-1986Slit-bolts
DIN 2510-3-1971Bolted Connections with Reduced Shank; Stud-bolts
DIN V 65900-11-2001Aerospace series – Bolts and pins – Materials (AECMA Technical Report TR 3775:1999)
DIN 11015-1995Agricultural machinery – Flat countersunk square neck bolts with short square
DIN 479-1985Square head bolts with short dog point
DIN 29733-3-1984Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear
DIN EN 4176-2007Aerospace series – Lockbolts, 100° countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating – Collars in titanium TI-P99002 or aluminium alloy 2024 – Metric series – Technical specification; German and English version EN 4176:2005
DIN 65538-1987Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN EN 14399-2-2006High-strength structural bolting assemblies for preloading – Part 2: Suitability test for preloading English version of DIN EN 14399-2:2006-06
DIN 103-8-1972ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
DIN 48078-2-1985Clevis straps for overhead lines, for coupling to U-bolts on the strap side
DIN EN 2933-1996Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996
DIN 835-1995Studs – Metal end 2 d
DIN 103-7-1972ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
DIN EN 14399-1-2006High-strength structural bolting assemblies for preloading – Part 1: General requirements English version of DIN EN 14399-1:2006-06
DIN 65533-1987Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
DIN 3906-2001Non soldering compression fittings with cutting ring – Branch T-stud with taper threaded stud end (not for new design)
DIN 58464-1978Studs with head for fine mechanics
DIN 46260-2-1988Low-voltage stud-terminals; part list
DIN EN ISO 4016-2001Hexagon head bolts – Product grade C (ISO 4016:1999); German version EN ISO 4016:2000
DIN EN 3063-1994Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994
DIN EN 13411-5-2003Terminations for steel wire ropes – Safety – Part 5: U-bolt wire grips; German version EN 13411-5:2003
DIN EN 15048-2-2007Non-preloaded structural bolting assemblies – Part 2: Suitability test; German version EN 15048-2:2007
DIN 3017-3-2002Hose clamps – Part 3: Bolt clamps
DIN EN 4172-2006Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4172:2006
DIN 58472-1978Studs with head and thread for fine mechanics
DIN EN ISO 887-2006Plain washers for metric bolts, screws and nuts for general purposes – General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07
DIN 48088-2-1985Connecting point for earthing and short-circuiting devices; cylinder bolt and annuar slot for earth-side connection
DIN EN 14399-6-2006High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06
DIN V 74051-10-1989Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; additional specifications for the use with centre axle trailers
DIN 70613-1989Automotive engineering; hexagon head bolts with small widths across flats (not for new constructions)
DIN EN 1515-2-2002Flanges and their joints – Bolting – Part 2: Classification of bolt materials for steel flanges, PN designated; German version EN 1515-2:2001
DIN 267-28-2004Fasteners – Part 28: Steel screws, bolts and studs with locking coating; Technical specifications
DIN EN 4501-2007Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4501:2006
DIN 25201-3-2004Design guide for railway vehicles and their components – Bolted joints – Part 3: Design – Electrical application
DIN EN 477-1995Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Determination of the resistance to impact of main profiles by falling mass; German version EN 477:1995
DIN 24536-1985Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings
DIN 43854-1979Sealing bolts for watthour meters
DIN V 4001-202-1989CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive external by tool
DIN 6918-1990Square taper washers for high-strength structual bolting of steel channel sections
DIN 607-1981Cup head nib bolts
DIN 65313-1987Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 65517-2002Aerospace – Cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65526-1998Aerospace – Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy – Nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 261-1987T-head bolts
DIN 46295-1-1985Terminal board, square shaped with six slit-bolts; main dimensions
DIN 938-1995Studs – Metal end 1 d
DIN EN 3818-2005Aerospace series – Bolts, MJ threads, in titanium alloy TI-P64001 – Strength class: 1100 MPa (at ambient temperature) – Technical specification; German and English version EN 3818:2004
DIN 2510-7-1971Bolted Connections with Reduced Shank; Extension Sleeves
DIN 7349-1974Plain Washers for Bolts with Heavy Clamping Sleeves
DIN 24539-1-1985Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth
DIN 4626-1986Center bolts for laminated leaf springs
DIN EN ISO 10664-2005Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005
DIN 24539-2-1985Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth
DIN 34803-2001Split pin holes and wire holes for bolts, screws and studs
DIN EN 2549-2007Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006
DIN EN ISO 4014 Berichtigung 1-2006Hexagon head bolts – Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000, Corrigenda to DIN EN ISO 4014:2001-03
DIN EN ISO 4014-2001Hexagon head bolts – Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000
DIN 48073-1975Connecting bolts for overhead power lines
DIN 608-1981Flat countersunk square neck bolts, with short square
DIN 65265-1998Aerospace – Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy – Nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65177-1986Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C
DIN 26029-2-1986Tank wagons; vent holes and drain plugs on tank wagons with indined tanks
DIN 58462-1978Studs with groove for fine mechanics
DIN 81421-1-1977Strap-shaped handles for equipment, type for bolted
DIN 2510-1 Bb.-1974Bolted connections with reduced shank, survey and installation; studies relating to the calculation of bolted connections
DIN 43144-1976Contact wire clamps for revolving bolts, for grooved contact wire
DIN 34800-2005Bolts and screws with external hexalobular driving feature with small flange
DIN 25201-1-2004Design guide for railway vehicles and their components – Bolted joints – Part 1: Classification of bolted joints
DIN 43119-1-1981Revolving bolts for contact wire clamp for overhead equipment
DIN V 4001-903-1990CAD standard parts file; specifications of geometry and parameters; bolts and pins without head
DIN EN 4401-2006Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006
DIN EN 1665-1998Hexagon bolts with flange, heavy series; German version EN 1665:1997
DIN 962-2001Bolts, screws, studs and nuts – Designation, types and finishes
DIN 74362-3-1982Brake drums for disc wheels without offset of truck and bus trailers with 8 or 10 bolt mounting; maximum outline
DIN 65525-1992Aerospace; bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1100 MPa, for temperatures up to 235 °C
STANDARDSDESCRIPTION
DIN EN ISO 8676-2001Hexagon head screws with metric fine pitch thread – Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000
DIN 34803-2001Split pin holes and wire holes for bolts, screws and studs
DIN EN 3308-1996Aerospace series – Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996
DIN EN ISO 4026-2004Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003
DIN 68856-5-1983Hardware for furniture; terms for furniture fittings; height adjusters, furniture legs, underframes
DIN 28601-2000Ductile iron pipes and fittings – Screwed socket joints – Assembly, sockets, screw rings, sealing rings and slip rings
DIN EN 20225-1992Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
DIN 34813-1999Plastic cross recessed cheese head screws
DIN EN 2929-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996
DIN EN 3760-1996Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996
DIN 34817-2001Weld screws with metric thread
DIN EN 3303-1997Aerospace series – Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997
DIN ISO 2380-2-2006Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
DIN EN 3381-1996Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3381:1996
DIN ISO 262-1999ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts (ISO 262:1998)
DIN EN ISO 7046-2-1994Cross recessed countersunk flat head screws (common head style) – Product grade A – Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994
DIN 65317-1987Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN EN ISO 1478-1999Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
DIN EN 3305-1996Aerospace series – Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996
DIN 267-27-2004Fasteners – Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications
DIN 7997-1984Cross recessed countersunk head wood screws
DIN EN ISO 10642-2004Hexagon socket countersunk head screws (ISO 10642:2004); German version EN ISO 10642:2004
DIN EN ISO 4027 Berichtigung 1-2007Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003, Corrigenda to DIN EN ISO 4027:2004-05
DIN ISO 6005-1995Alpine skis – Ski bindings screws – Test methods; identical with ISO 6005:1991
DIN 41673-1979Miniature fuses; screw type fuse-base, 6,3 A, 250 V, flat, for interchangeable cartridge fuse-links
DIN EN ISO 4027-2004Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003
DIN 34800-2005Bolts and screws with external hexalobular driving feature with small flange
DIN 502-2004Driving Components – Flange bearings – Fastened with two screws
DIN 7998-1975Threads and Thread Ends for Wood Screws
DIN EN 2897-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa/235 °C; German version EN 2897:1996
DIN 65557-1989Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN EN 14512-2006Tanks for the transport of dangerous goods – Tank equipment for the transport of liquid chemicals – Hinged manhole covers and neckrings with pivoting bolts; English version of DIN EN 14512:2006-10
DIN EN ISO 4762-2004Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004
DIN EN ISO 14580 Berichtigung 1-2006Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001, Corrigenda to DIN EN ISO 14580:2002-05; German version EN ISO 14580:2001/AC:2005
DIN EN 2649-1995Aerospace series – Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995
DIN EN 2651-1996Aerospace series – Screws, pan head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996
DIN EN ISO 14587-2002Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); German version EN ISO 14587:2001
DIN 65451-2003Aerospace – Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C
DIN EN 3218-010-2006Aerospace series – Connectors, rectangular, with metallic shells and screws-locking – Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors – Product standard; German and English version EN 3218-010:2006
DIN 29782-1988Aerospace; wire thread inserts; free running or screw-locking; technical specification
DIN EN 3218-002-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006
DIN 505-2004Driving components – Cap bearings, half bearings – Fastening with two screws
DIN EN ISO 15480-2000Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
DIN EN 3218-005-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 005: Plug with non-removable size 22 solder contacts – Product standard; German and English version EN 3218-005:2006
DIN 6332-2003Grub screws with thrust point
DIN 5903-2-1997Fish bolts – Part 2: With square head
DIN 73368-1986Overflow valves and hollow screw for fuel injection devices
DIN 2240-2-2001Geometrical Product Specification (GPS) – Handles – Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps
DIN EN ISO 10666-2000Drilling screws with tapping screw thread – Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
DIN 65285-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 6368-1999Wrenches for cutter retaining screws
DIN ISO 6004-1995Alpine skis – Ski bindings screws – Requirements; identical with ISO 6004:1991
DIN 561-1995Hexagon head set screws with small hexagon and dog point
DIN 898-1995Assembly tools for screws and nuts – Survey, terms and definitions
DIN 65269-1987Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 65558-1989Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN EN 3740-1996Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3740:1996
DIN EN 2937-1994Aerospace series – Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994
DIN 65284-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 968-2002Cross recessed pan head tapping screws with collar
DIN EN ISO 7721-2-1994Countersunk flat head screws – Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994
DIN 925-2006Slotted countersunk head screws with full dog point
DIN EN 20273-1992Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
DIN V 4001-12-1988CAD standard parts file; specification of geometry and parameters; countersunk head screws
DIN 34812-1999Plastic pan head screws with cross recess
DIN 65522-1984Aerospace; screws, hexagon, with MJ-thread, threaded opproximatley to head, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C
DIN 962-2001Bolts, screws, studs and nuts – Designation, types and finishes
DIN EN ISO 6789-2003Assembly tools for screws and nuts – Hand torque tools – Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003); German version EN ISO 6789:2003
DIN ISO 2351-3-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
DIN 81402-1978Hinges for ship’s cabinet doors, for screwing-on
DIN 69051-1-1989Machine tools; ball screws; terminology, designation system
DIN 65397-2003Aerospace – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN ISO 2351-3-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
DIN ISO 2351-1-2007Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
DIN EN ISO 14584-2002Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001
DIN 65189-1986Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy
DIN EN 2888-2007Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006
DIN EN 27436-1992Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
DIN 5903-1-1997Fish bolts – Part 1: With round head and oval neck
DIN 34822-2005Cheese head screws with flange with 12 point socket
DIN EN 320-1993Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993
DIN 787-2005Bolts and screws for T-slots
DIN 6908-1995Conical spring washers for screw and washer assemblies
DIN EN 3304-1996Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996
DIN 48319-1962Hook screws
DIN 65149-1980Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification
DIN 7500-2-1984Thread rolling screws for ISO metric thread; guideline values for hole diameters
DIN EN ISO 15481-2000Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
DIN EN 3218-009-2006Aerospace series – Connectors, rectangular, with metallic shells and screws-locking – Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors – Product standard; German and English version EN 3218-009:2006
DIN EN 3218-007-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 007: Plug with rear-removable size 20 crimp contacts – Product standard; German and English version EN 3218-007:2006
DIN 974-1-1991Diameters of counterbores for hexagon socket head cap screws and screws with cheese head or pan head; manufacturing dimensions
DIN 65393-2002Aerospace – Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C
DIN EN ISO 15482-2000Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999
DIN 72786-2-1990Windscreen and rear window wiper systems for road vehicles; wiper arm and blade assembly; type C wiper blade for screw fastening
DIN 72331-2-1979Cable connectors for starter batteries; screw terminals for conductor cross sections from 50 to 120 mm<(hoch)2>
DIN 967-2002Cross recessed pan head screws with collar – Product grade A
DIN V 4001-207-1991CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
DIN EN 60169-25-1994Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (type TWHN) (IEC 60169-25:1992); German version EN 60169-25:1993
DIN 927-2006Slotted shoulder screws
DIN 65055-1992Aerospace; threaded control cable ends and turnbarrels; technical specification; inactive for new design
DIN 65398-2003Aerospace – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/315 °C
DIN V 4001-207-1991CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
DIN 8243-1969Slotted Cheese Head Screws for Fine Mechanics; M 0.3 to M 1.4
DIN 65349-2001Aerospace – Testing of locking torques for nuts and related threaded parts, with metric screw thread – Test methods
DIN EN 60999-1-2000Connecting devices – Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units – Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm<(hoch)2> up to 35 mm<(hoch)2> (included) (IEC 60999-1:1999, modified); German version EN 60999-1:2000
DIN 7996-1986Cross recessed pan head wood screws
DIN 974-2-1991Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
DIN EN ISO 4757-1994Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994
DIN 316-1998Wing screws, rounded wings
DIN EN 3543-1997Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3543:1997
DIN 404-2006Slotted capstan screws
DIN 924-2006Slotted raised countersunk head screws with full dog point
DIN 6900-5-2004Screw and washer assemblies with coarse thread – Part 5: With captive conical spring washer
DIN EN 4323-2006Aerospace series – Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated – Classification: 900 MPa (at ambient temperature)/350 °C; German and English version EN 4323:2004
DIN 55406-2007Packaging – Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)
DIN 2325-2007Screw driver for screws with internal serration – Screw driver points, gauges and test specimens for torque testing
DIN 34821-2005Cheese head screws with 12 point socket
DIN EN ISO 15480-2000Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
DIN 3335-1968Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN EN 2870-1996Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996
DIN 7516-1995Thread cutting screws – Cross recessed head screws – Dimensions, requirements, testing
DIN 34824-200712 point socket for bolts and screws
DIN 506-2004Driving components – Cap-bearings, half bearings – Fastening with four screws
DIN 65197-1989Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses
DIN 571-1986Hexagon head wood screws
DIN ISO 7026-1992Road vehicles; screw-in injection nozzle holders types 20, 21 and 27 for pintle nozzle size “S”, type “B”; identical with ISO 7026:1990
DIN EN 3218-011-2006Aerospace series – Connectors, rectangular, with metallic shells and screws-locking – Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors – Product standard; German and English version EN 3218-011:2006
DIN 4000-2 Bb.1-1999Tabular layouts of article characteristics – Part 2: Screws and nuts; attribution to technical standards on screws
DIN EN ISO 4759-3-2000Tolerances for fasteners – Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
DIN 34823-2005Raised countersunk head screws with 12 point socket
DIN EN 28839-1991Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
DIN EN 3007-1996Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996
DIN 792-1976Cylindrical counter sunk screws
DIN ISO 10228-1995Cross-country skis – Binding mounting area – Requirements for test screws; identical with ISO 10228:1991
DIN EN 3218-008-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 008: Receptacle with rear-removable size 20 crimp contacts – Product standard; German and English version EN 3218-008:2006
DIN 6911-2004Hexagon socket screw keys with pilot
DIN 72331-1-1979Cable connectors for starter batteries; screw terminals for conductor cross sections up to 70 mm<(hoch)2>
DIN EN ISO 14585 Berichtigung 1-2006Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001, Corrigenda to DIN EN ISO 14585:2002-05; German version EN ISO 14585:2001/AC:2005
DIN EN 4304-2007Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4304:2005
DIN EN 60745-2-2-2007Hand-held motor-operated electric tools – Safety – Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, modified); German version EN 60745-2-2:2003 + A11:2007
DIN 7995-1984Cross recessed raised countersunk head wood screws
DIN ISO 2380-1-2006Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004)
DIN 56922-1982Theatre engineering, stage directions scenery; stage-screws, hand screws
DIN EN 26157-1-1991Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
DIN 6912-2002Hexagon socket head cap screws with centre, with low head
DIN EN 2874-1996Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated – Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996
DIN EN 2928-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996
DIN EN ISO 898-1-1999Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
DIN EN ISO 14583 Berichtigung 1-2006Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001, Corrigenda to DIN EN ISO 14583:2002-05; German version EN ISO 14583:2001/AC:2005
DIN EN 26157-3-1991Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN ISO 9102-1992Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990
DIN 267-28-2004Fasteners – Part 28: Steel screws, bolts and studs with locking coating; Technical specifications
DIN 3124-2007Hand-operated socket wrenches, square drive for hexagon screws
DIN EN 61076-2-101-2006Connectors for electronic equipment – Part 2-101: Circular connectors – Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (IEC 61076-2-101:2003 + A1:2006); German version EN 61076-2-101:2003 + A1:2006
DIN EN ISO 15065-2005Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
DIN EN 4496 Berichtigung 1-2007Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006
DIN 16286-1997Screw plugs with male connection G 1/2 B according to DIN EN 837-1
DIN EN 2926-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996
DIN EN ISO 7045-1994Pan head screws with type H or type Z cross recess – Product grade A (ISO 7045:1994); German version EN ISO 7045:1994
DIN 920-2006Slotted pan head screws with small head
DIN 18182-2-1987Accessories for use with gypsum plasterboards; dry wall screw
DIN 71436-1989Compression couplings with olives; hollow screw fittings and ring connection fittings for use with union nuts
DIN 4000-151-2005Tabular layouts of properties – Part 151: Connecting parts for hand- and machine-operated assembly tools for screws and nuts
DIN 34827-2005Hexalobular socket set screws
DIN 85339-1996Hexagon head screw plugs – With retaining pin and bleeding hole
DIN ISO 7049-1990Cross recessed pan head tapping screws; identical with ISO 7049:1983
DIN EN 2889-2007Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006
DIN EN 2927-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996
DIN EN ISO 7047-1994Countersunk raised head screws (common head style) with type H or type Z cross recess – Product grade A (ISO 7047:1994); German version EN ISO 7047:1994
DIN 65254-2002Hexagon insert bits – For screws with internal serrations
DIN 68345-1968Screwed connection for handles and brooms; screw cap and screw plug
DIN EN 3006-1994Aerospace series – Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994
DIN 65267-1992Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 34810-1999Plastic hexagon head screws
DIN ISO 1482-1990Slotted countersunk (flat) head tapping screws (common head style); identical with ISO 1482:1983
DIN 5914-1965Baseplate screws with rectangular head
DIN 5586-1989Compressed air equipment for rail vehicles; locking screws with collar and vent
DIN EN 2940-1995Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995
DIN EN ISO 3506-3-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997
DIN EN 4307-2007Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4307:2005
DIN EN 20898-7-1995Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
DIN 69051-5-2002Machine tools – Ball screws – Part 5: Mounting dimensions for ball nuts
DIN ISO 8764-1-2006Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 1: Driver tips (ISO 8764-1:2004)
DIN EN ISO 7380-2004Heaxagon socket button head screws (ISO 7380:2004); German version EN ISO 7380:2004
DIN 28139-2-1985Welding necks for glass lined vessels; form M manhole, handhole and assembly opening for clamp screw connections; connecting, dimensions
DIN ISO 1085-2007Assembly tools for screws and nuts – Double-ended wrenches – Size pairing (ISO 1085:1999) English version of DIN ISO 1085:2007-04
DIN EN 3307-1996Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996
DIN EN 2884-1996Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996
DIN 34819-2002Hexalobular socket raised head tapping screws with collar
DIN 564-1995Hexagon head set screws with small hexagon and half dog point and flat cone point
DIN EN ISO 4759-1-2001Tolerances for fasteners – Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
DIN ISO 2936-2001Assembly tools for screws and nuts – Hexagon socket screw keys (ISO 2936:2001)
DIN 7513-1995Thread cutting screws – Hexagon screws and slotted head screws – Dimensions, requirements, testing
DIN EN 3306-1996Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996
DIN 931 Bb.1-1986Hexagon head bolts with shank; masses
DIN EN ISO 2342-2004Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003
DIN 65253-2002L-wrench for screws with internal serration
DIN EN 2886-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa/235 °C; German version EN 2886:1996
DIN EN ISO 14586-2002Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001
DIN EN 2363-1989Aerospace series; locking clips for turnbuckles of control cables; dimensions
DIN EN ISO 10510-1999Tapping screw and washer assemblies with plain washers (ISO 10510:1999); German version EN ISO 10510:1999
DIN 7643-2005Compression couplings – Hollow screws for ring-type banjos
DIN EN 2652-1997Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997
DIN 70614-1989Automotive engineering; hexagon head screws with small widths across flats (not for new constructions)
DIN EN ISO 1580-1994Slotted pan head screws – Product grade A (ISO 1580:1994); German version EN ISO 1580:1994
DIN EN 2885-1996Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996
DIN EN 2930-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996
DIN 267-30-2001Fasteners – Technical delivery conditions – Part 30: Metric thread rolling screws of property class 10.9
DIN EN 4497-2007Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005
DIN 9841-1980Hexagon socket head shoulder screw for press tools
DIN ISO 7050-1990Cross recessed countersunk (flat) head tapping screws (common head style); identical with ISO 7050:1983
DIN 34802-2001Hexalobular socket heat cap screw with large driving feature
DIN 34801-1999Bolts and screws with external hexalobular driving feature with large flange
DIN EN ISO 10673-1998Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A (ISO 10673:1998); German version EN ISO 10673:1998
DIN EN ISO 15483-2000Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
DIN 65533-1987Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
DIN ISO 885-2001General purpose bolts and screws – Metric series – Radii under the head (ISO 885:2000)
DIN ISO 2351-1-2007Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
DIN EN 3725-2005Aerospace series – Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated – Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004
DIN EN 2938-1995Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995
DIN 318-1999Wing crews – Edges wings
DIN 7975-1989Tapping screw connections; guideline values for core hole diameters and use
DIN 8377-2006Subland twist drills with Morse taper shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
DIN EN 2932-1996Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996
DIN EN ISO 4017-2001Hexagon head screws – Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000
DIN EN ISO 3506-4-2003Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003
DIN 65308-1986Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel
DIN EN ISO 15481-2000Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
DIN 65121-1992Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
DIN ISO 7051-1990Cross recessed raised countersunk (oval) head tapping screws; identical with ISO 7051:1983
DIN EN ISO 2702-1994Heat-treated steel tapping screws – Mechanical properties (ISO 2702:1992); German version EN ISO 2702:1994
DIN 8376-2006Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
DIN EN 3218-006-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 006: Receptacle with non-removable size 22 solder contacts – Product standard; German and English version EN 3218-006:2006
DIN 95-1986Slotted raised countersunk (oval) head wood screws
DIN 48334-1977Turnbuckles for overhead power lines
DIN 7422-2002Bits with square drive for hexagon socket screws, hand operated
DIN 65110-1984Aerospace; bihexagonal heads for screws and bolts
DIN 5042-8-1985Combustion lights and gas lights; injector jet pipes and air control screws
DIN EN ISO 14583-2002Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001
DIN 7433-1978Adapters for Hexagon Insert Bits for Use with Spiral Ratchet Drivers
DIN EN ISO 2009-1994Slotted countersunk flat head screws (common head style) – Product grade A (ISO 2009:1994); German version EN ISO 2009:1994
DIN EN 27721-1992Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
DIN EN ISO 10644-1998Screw and washer assemblies with plain washers – Washer hardness classes 200 HV and 300 HV (ISO 10644:1998); German version EN ISO 10644:1998
DIN EN ISO 7085-2000Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999); German version EN ISO 7085:1999
DIN EN 2583-1997Aerospace series – Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997
DIN EN 3035-1996Aerospace series – 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996
DIN ISO 8764-2-2006Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
DIN EN ISO 7046-1-1994Countersunk flat head screws (common head style) with type H or type Z cross recess – Product grade A – Part 1: Property class 4.8 (ISO 7046-1:1994); German version EN ISO 7046-1:1994
DIN EN ISO 10669-1999Plain washers for tapping screw and washer assemblies – Normal and large series – Product grade A (ISO 10669:1999); German version EN ISO 10669:1999
DIN 8272-1982Balance-screws for watches and clocks
DIN 44879-1985Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated
DIN 8245-1972Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4
DIN EN ISO 14585-2002Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001
DIN 65307-1986Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel
DIN ISO 2351-2-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
DIN 65191-2002Aerospace – Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel
DIN EN ISO 10664-2005Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005
DIN EN ISO 10666-2000Drilling screws with tapping screw thread – Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
DIN EN ISO 4028-2004Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003
DIN 3126-2004Drive ends for screwdriver bits and connecting parts – Dimensions
DIN 41681-1965Miniature fuses; fuse holder, 500 V to 3 kV, for interchangeable fuse links, fuse holder, screw caps
DIN 2299-1-2003Geometrical Product Specification (GPS) – NOT GO screw ring gauges for ISO metric screw threads – Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes
DIN ISO 2351-2-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
DIN 6305-2002Tommy nuts with fixed clamping bolt
DIN 4000-2 Bb.2-1999Tabular layouts of article characteristics – Part 2: Screws and nuts; attribution to technical standards on nuts
DIN EN ISO 898-5 Berichtigung 1-2007Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10
DIN EN ISO 3506-1-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997
DIN V 4001-11-1992CAD standard parts library; specification of geometrie and parameters; head screws, with plain sitting surface, with drive external by tool
DIN ISO 7794-1992Cross-country skis; ski binding screws; requirements; identical with ISO 7794:1991
DIN ISO 8764-2-2006Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
DIN ISO 1479-1990Hexagon head tapping screws; identical with ISO 1479:1983
DIN 921-2007Slotted pan head screws with large head
DIN EN ISO 4018-2001Hexagon head screws – Product grade C (ISO 4018:1999); German version EN ISO 4018:2000
DIN EN 27435-1992Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
DIN ISO 1891-1979Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
DIN EN ISO 14579-2002Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001
DIN EN 3218-001-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 001: Technical specification; German and English version EN 3218-001:2006
DIN 71989-1982Adjusting screws for cables for controls
DIN ISO 7795-1995Cross-country skis – Ski binding screws Test methods; identical with ISO 7795:1994
DIN EN ISO 887-2006Plain washers for metric bolts, screws and nuts for general purposes – General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07
DIN EN 2654-1996Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996
DIN EN 3037-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated – Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996
DIN 6367-2003Cutter retaining screws for milling machine arbors
DIN 58520-1-1994Screws for drawing instruments; part 1: T-bolts
DIN 8375-2006Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws
DIN EN 27434-1992Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
DIN EN 2939-1994Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994
DIN 65190-1986Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy
DIN 5200-1987Screwdrivers for slotted head screws, double offset; dimensions
DIN ISO 1711-1-2007Assembly tools for screws and nuts – Technical specifications – Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2007)
DIN 58450-1972Slotted flat mushroom head screw; scale-screw
DIN 65394-2003Aerospace – Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C
DIN EN 4509-2007Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006
DIN EN 3820-2007Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006
DIN 65542-1987Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 43165-1985Electric traction; screws with cup point for overhead fittings
DIN EN 3038-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3038:1996
DIN EN 24766-1992Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992
DIN 404 Berichtigung 1-2007Slotted capstan screws, Corrigenda to DIN 404:2006-08
DIN 923-2006Slotted pan head screws with shoulder
DIN 8374-2006Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws
DIN 65004-1979Aerospace; pan head screws with TORQ-SET recess, long thread
DIN 87314-1987Male square wrenches for drain screws
DIN 58530-1995Adjusting screws for drawing instruments
DIN 649-1987T-slots for T-head bolts
DIN 6307-2002Tommy nuts with movable clamping bolt
DIN EN 4496-2006Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005
DIN 25200-1997Screws, bolts and nuts for rail vehicles – Summary
DIN EN ISO 1207-1994Slotted cheese head screws – Product grade A (ISO 1207:1992); German version EN ISO 1207:1994
DIN EN ISO 4029-2004Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003
DIN 74-2003Countersinks for countersunk head screws except countersunk head screws with heads according to DIN EN 27721
DIN ISO 2380-2-2006Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
DIN 7500-1-2007Case hardened and tempered thread rolling screws for metric ISO thread – Part 1: Types, designation, requirements
DIN ISO 8992-2005Fasteners – General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
DIN 34811-1999Plastic flat head screws with cross recess
DIN EN ISO 15483-2000Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
DIN 49360-3-1986D-type fuses; E 16 gauge rings with functional dimensions for adapter screw fitters
DIN EN ISO 898-5-1998Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998
DIN ISO 1481-1990Slotted pan head tapping screws; identical with ISO 1481:1983
DIN 65188-1986Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy
DIN 6928-2002Hexagon washer head tapping screws
DIN ISO 1483-1990Slotted raised countersunk (oval) head tapping screws (common head style); identical with ISO 1483:1983
DIN EN 2650-1996Aerospace series – Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996
DIN 4503-1-1993Tripod connections for cameras and accessories; screw connections
DIN EN ISO 7048-1998Cross recessed cheese head screws (ISO 7048:1998); German version EN ISO 7048:1998
DIN 65309-1986Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel
DIN 475-1-1984Widths across flats for bolts, screws, valves and fittings
DIN 89300-1995Terminal connectors with clamping-screw, 16 A, 500 V, for nominal cross-sectional areas up to 2,5 mm<(hoch)2>
DIN 65289-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN EN 2653-1996Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996
DIN 653-2006Knurled thumb screws, low type
DIN 15237-1980Continuous mechanical handling equipment; seating screws and cupped washers for the attachment of components to belts
DIN 89284-2007Cap srews for mounting holes and glands according to DIN 89280; Text in German and English
DIN EN 4306-2007Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005
DIN 69051-3-1989Machine tools; ball screws; acceptance conditions and acceptance tests
DIN EN 2569-1992Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991
DIN EN ISO 14580-2002Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001
DIN EN 3759-1996Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996
DIN 58520-2-1996Bolts for drawing instruments – Part 2: Deep flat countersunk bolt
DIN 97-1986Slotted countersunk (flat) head wood screws
DIN ISO 7913-1986Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
DIN 96-1986Slotted round head wood screws
DIN EN ISO 2010-1994Slotted raised countersunk head screws (common head style) – Product grade A (ISO 2010:1994); German version EN ISO 2010:1994
DIN 7984-2002Hexagon socket head cap screws with low head
DIN 65286-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c
DIN 503-2004Driving components – Flange bearings – Fastened with four screws
DIN ISO 10045-1992Alpine skis; binding mounting area; requirements for test screws; identical with ISO 10045:1991
STANDARDSDESCRIPTION
DIN 6912-2002Hexagon socket head cap screws with centre, with low head
DIN 34827-2005Hexalobular socket set screws
DIN 5914-1965Baseplate screws with rectangular head
DIN 69051-5-2002Machine tools – Ball screws – Part 5: Mounting dimensions for ball nuts
DIN 3124-2007Hand-operated socket wrenches, square drive for hexagon screws
DIN 7995-1984Cross recessed raised countersunk head wood screws
DIN EN 3820-2007Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006
DIN 561-1995Hexagon head set screws with small hexagon and dog point
DIN ISO 8764-1-2006Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 1: Driver tips (ISO 8764-1:2004)
DIN 7984-2002Hexagon socket head cap screws with low head
DIN EN ISO 14584-2002Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001
DIN 28601-2000Ductile iron pipes and fittings – Screwed socket joints – Assembly, sockets, screw rings, sealing rings and slip rings
DIN 65317-1987Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN EN 3007-1996Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996
DIN 65557-1989Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65190-1986Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy
DIN ISO 7051-1990Cross recessed raised countersunk (oval) head tapping screws; identical with ISO 7051:1983
DIN V 4001-11-1992CAD standard parts library; specification of geometrie and parameters; head screws, with plain sitting surface, with drive external by tool
DIN EN ISO 14583-2002Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001
DIN EN 2926-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996
DIN EN ISO 10644-1998Screw and washer assemblies with plain washers – Washer hardness classes 200 HV and 300 HV (ISO 10644:1998); German version EN ISO 10644:1998
DIN 3126-2004Drive ends for screwdriver bits and connecting parts – Dimensions
DIN 8376-2006Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
DIN 9841-1980Hexagon socket head shoulder screw for press tools
DIN EN ISO 3506-1-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997
DIN 72331-1-1979Cable connectors for starter batteries; screw terminals for conductor cross sections up to 70 mm<(hoch)2>
DIN EN ISO 4027 Berichtigung 1-2007Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003, Corrigenda to DIN EN ISO 4027:2004-05
DIN 571-1986Hexagon head wood screws
DIN 4000-2 Bb.2-1999Tabular layouts of article characteristics – Part 2: Screws and nuts; attribution to technical standards on nuts
DIN EN 2885-1996Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996
DIN EN 27436-1992Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
DIN 65397-2003Aerospace – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN 8375-2006Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws
DIN EN ISO 898-5 Berichtigung 1-2007Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10
DIN EN 60169-25-1994Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (type TWHN) (IEC 60169-25:1992); German version EN 60169-25:1993
DIN EN 3740-1996Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3740:1996
DIN EN 3006-1994Aerospace series – Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994
DIN 96-1986Slotted round head wood screws
DIN V 4001-12-1988CAD standard parts file; specification of geometry and parameters; countersunk head screws
DIN 4503-1-1993Tripod connections for cameras and accessories; screw connections
DIN 65542-1987Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 267-28-2004Fasteners – Part 28: Steel screws, bolts and studs with locking coating; Technical specifications
DIN EN 3304-1996Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996
DIN 7997-1984Cross recessed countersunk head wood screws
DIN EN 2928-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996
DIN EN ISO 15481-2000Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
DIN EN 3543-1997Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3543:1997
DIN EN 3218-005-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 005: Plug with non-removable size 22 solder contacts – Product standard; German and English version EN 3218-005:2006
DIN EN ISO 898-1-1999Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
DIN EN 26157-1-1991Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
DIN EN ISO 15482-2000Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999
DIN 65149-1980Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification
DIN 71989-1982Adjusting screws for cables for controls
DIN 81402-1978Hinges for ship’s cabinet doors, for screwing-on
DIN 15237-1980Continuous mechanical handling equipment; seating screws and cupped washers for the attachment of components to belts
DIN 68345-1968Screwed connection for handles and brooms; screw cap and screw plug
DIN 925-2006Slotted countersunk head screws with full dog point
DIN 649-1987T-slots for T-head bolts
DIN 6928-2002Hexagon washer head tapping screws
DIN EN 20898-7-1995Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
DIN EN ISO 15483-2000Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
DIN 34803-2001Split pin holes and wire holes for bolts, screws and studs
DIN 475-1-1984Widths across flats for bolts, screws, valves and fittings
DIN ISO 2351-2-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
DIN 503-2004Driving components – Flange bearings – Fastened with four screws
DIN 69051-1-1989Machine tools; ball screws; terminology, designation system
DIN EN 4496 Berichtigung 1-2007Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006
DIN ISO 7913-1986Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
DIN ISO 6004-1995Alpine skis – Ski bindings screws – Requirements; identical with ISO 6004:1991
DIN EN ISO 15065-2005Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
DIN 34822-2005Cheese head screws with flange with 12 point socket
DIN 65267-1992Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 58450-1972Slotted flat mushroom head screw; scale-screw
DIN EN 4496-2006Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005
DIN EN 3218-008-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 008: Receptacle with rear-removable size 20 crimp contacts – Product standard; German and English version EN 3218-008:2006
DIN 95-1986Slotted raised countersunk (oval) head wood screws
DIN ISO 2351-1-2007Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
DIN 34823-2005Raised countersunk head screws with 12 point socket
DIN EN 3760-1996Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996
DIN EN ISO 14580-2002Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001
DIN EN ISO 4026-2004Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003
DIN 65349-2001Aerospace – Testing of locking torques for nuts and related threaded parts, with metric screw thread – Test methods
DIN 7500-1-2007Case hardened and tempered thread rolling screws for metric ISO thread – Part 1: Types, designation, requirements
DIN EN 3218-001-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 001: Technical specification; German and English version EN 3218-001:2006
DIN EN ISO 10669-1999Plain washers for tapping screw and washer assemblies – Normal and large series – Product grade A (ISO 10669:1999); German version EN ISO 10669:1999
DIN EN ISO 898-5-1998Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998
DIN EN ISO 10510-1999Tapping screw and washer assemblies with plain washers (ISO 10510:1999); German version EN ISO 10510:1999
DIN EN ISO 7046-1-1994Countersunk flat head screws (common head style) with type H or type Z cross recess – Product grade A – Part 1: Property class 4.8 (ISO 7046-1:1994); German version EN ISO 7046-1:1994
DIN 6305-2002Tommy nuts with fixed clamping bolt
DIN 65110-1984Aerospace; bihexagonal heads for screws and bolts
DIN 58520-2-1996Bolts for drawing instruments – Part 2: Deep flat countersunk bolt
DIN 8272-1982Balance-screws for watches and clocks
DIN 792-1976Cylindrical counter sunk screws
DIN EN ISO 14585-2002Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001
DIN EN 2938-1995Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995
DIN 41681-1965Miniature fuses; fuse holder, 500 V to 3 kV, for interchangeable fuse links, fuse holder, screw caps
DIN V 4001-207-1991CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
DIN 316-1998Wing screws, rounded wings
DIN 974-2-1991Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
DIN EN ISO 10664-2005Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005
DIN EN 4509-2007Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006
DIN ISO 1479-1990Hexagon head tapping screws; identical with ISO 1479:1983
DIN EN 2927-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996
DIN 2299-1-2003Geometrical Product Specification (GPS) – NOT GO screw ring gauges for ISO metric screw threads – Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes
DIN EN ISO 10673-1998Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A (ISO 10673:1998); German version EN ISO 10673:1998
DIN EN ISO 15483-2000Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
DIN 8245-1972Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4
DIN ISO 2351-3-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
DIN EN 27721-1992Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
DIN 87314-1987Male square wrenches for drain screws
DIN EN 3218-007-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 007: Plug with rear-removable size 20 crimp contacts – Product standard; German and English version EN 3218-007:2006
DIN 65121-1992Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
DIN 34811-1999Plastic flat head screws with cross recess
DIN 65254-2002Hexagon insert bits – For screws with internal serrations
DIN ISO 885-2001General purpose bolts and screws – Metric series – Radii under the head (ISO 885:2000)
DIN 505-2004Driving components – Cap bearings, half bearings – Fastening with two screws
DIN EN 3218-006-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 006: Receptacle with non-removable size 22 solder contacts – Product standard; German and English version EN 3218-006:2006
DIN 6332-2003Grub screws with thrust point
DIN EN ISO 2342-2004Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003
DIN EN 3307-1996Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996
DIN 65197-1989Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses
DIN ISO 2380-2-2006Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
DIN 7516-1995Thread cutting screws – Cross recessed head screws – Dimensions, requirements, testing
DIN ISO 7794-1992Cross-country skis; ski binding screws; requirements; identical with ISO 7794:1991
DIN 56922-1982Theatre engineering, stage directions scenery; stage-screws, hand screws
DIN ISO 8764-2-2006Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
DIN ISO 2351-2-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
DIN EN ISO 14583 Berichtigung 1-2006Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001, Corrigenda to DIN EN ISO 14583:2002-05; German version EN ISO 14583:2001/AC:2005
DIN EN 320-1993Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993
DIN EN 2940-1995Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995
DIN 65522-1984Aerospace; screws, hexagon, with MJ-thread, threaded opproximatley to head, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C
DIN EN ISO 7048-1998Cross recessed cheese head screws (ISO 7048:1998); German version EN ISO 7048:1998
DIN 58530-1995Adjusting screws for drawing instruments
DIN EN 2649-1995Aerospace series – Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995
DIN 898-1995Assembly tools for screws and nuts – Survey, terms and definitions
DIN EN 27435-1992Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
DIN 6900-5-2004Screw and washer assemblies with coarse thread – Part 5: With captive conical spring washer
DIN EN 27434-1992Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
DIN EN 60745-2-2-2007Hand-held motor-operated electric tools – Safety – Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, modified); German version EN 60745-2-2:2003 + A11:2007
DIN 65451-2003Aerospace – Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C
DIN 34821-2005Cheese head screws with 12 point socket
DIN 8243-1969Slotted Cheese Head Screws for Fine Mechanics; M 0.3 to M 1.4
DIN EN 3306-1996Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996
DIN EN 20273-1992Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
DIN ISO 2351-3-2006Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
DIN 49360-3-1986D-type fuses; E 16 gauge rings with functional dimensions for adapter screw fitters
DIN 16286-1997Screw plugs with male connection G 1/2 B according to DIN EN 837-1
DIN 564-1995Hexagon head set screws with small hexagon and half dog point and flat cone point
DIN 74-2003Countersinks for countersunk head screws except countersunk head screws with heads according to DIN EN 27721
DIN EN ISO 10666-2000Drilling screws with tapping screw thread – Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
DIN EN 24766-1992Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992
DIN EN 2870-1996Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996
DIN EN ISO 7380-2004Heaxagon socket button head screws (ISO 7380:2004); German version EN ISO 7380:2004
DIN EN ISO 15480-2000Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
DIN 89300-1995Terminal connectors with clamping-screw, 16 A, 500 V, for nominal cross-sectional areas up to 2,5 mm<(hoch)2>
DIN 25200-1997Screws, bolts and nuts for rail vehicles – Summary
DIN EN ISO 14579-2002Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001
DIN 8374-2006Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws
DIN ISO 262-1999ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts (ISO 262:1998)
DIN EN 2874-1996Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated – Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996
DIN 2325-2007Screw driver for screws with internal serration – Screw driver points, gauges and test specimens for torque testing
DIN ISO 7050-1990Cross recessed countersunk (flat) head tapping screws (common head style); identical with ISO 7050:1983
DIN 6368-1999Wrenches for cutter retaining screws
DIN ISO 7795-1995Cross-country skis – Ski binding screws Test methods; identical with ISO 7795:1994
DIN EN ISO 15480-2000Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
DIN 5586-1989Compressed air equipment for rail vehicles; locking screws with collar and vent
DIN ISO 9102-1992Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990
DIN 65189-1986Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy
DIN 267-27-2004Fasteners – Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications
DIN ISO 1482-1990Slotted countersunk (flat) head tapping screws (common head style); identical with ISO 1482:1983
DIN EN ISO 1207-1994Slotted cheese head screws – Product grade A (ISO 1207:1992); German version EN ISO 1207:1994
DIN EN ISO 7721-2-1994Countersunk flat head screws – Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994
DIN ISO 1711-1-2007Assembly tools for screws and nuts – Technical specifications – Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2007)
DIN ISO 1481-1990Slotted pan head tapping screws; identical with ISO 1481:1983
DIN 318-1999Wing crews – Edges wings
DIN EN ISO 3506-3-1998Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997
DIN EN 2651-1996Aerospace series – Screws, pan head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996
DIN 34802-2001Hexalobular socket heat cap screw with large driving feature
DIN EN 3035-1996Aerospace series – 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996
DIN EN 3218-011-2006Aerospace series – Connectors, rectangular, with metallic shells and screws-locking – Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors – Product standard; German and English version EN 3218-011:2006
DIN 65308-1986Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel
DIN 72786-2-1990Windscreen and rear window wiper systems for road vehicles; wiper arm and blade assembly; type C wiper blade for screw fastening
DIN EN ISO 8676-2001Hexagon head screws with metric fine pitch thread – Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000
DIN EN ISO 15481-2000Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
DIN EN 2888-2007Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006
DIN EN 2652-1997Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997
DIN 968-2002Cross recessed pan head tapping screws with collar
DIN EN 20225-1992Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
DIN ISO 6005-1995Alpine skis – Ski bindings screws – Test methods; identical with ISO 6005:1991
DIN 65284-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 65191-2002Aerospace – Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel
DIN 97-1986Slotted countersunk (flat) head wood screws
DIN 18182-2-1987Accessories for use with gypsum plasterboards; dry wall screw
DIN EN ISO 7046-2-1994Cross recessed countersunk flat head screws (common head style) – Product grade A – Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994
DIN EN 2654-1996Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996
DIN EN ISO 4029-2004Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003
DIN EN ISO 14585 Berichtigung 1-2006Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001, Corrigenda to DIN EN ISO 14585:2002-05; German version EN ISO 14585:2001/AC:2005
DIN EN 4323-2006Aerospace series – Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated – Classification: 900 MPa (at ambient temperature)/350 °C; German and English version EN 4323:2004
DIN EN 3381-1996Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3381:1996
DIN 65285-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 7643-2005Compression couplings – Hollow screws for ring-type banjos
DIN EN ISO 4017-2001Hexagon head screws – Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000
DIN 923-2006Slotted pan head screws with shoulder
DIN EN ISO 1580-1994Slotted pan head screws – Product grade A (ISO 1580:1994); German version EN ISO 1580:1994
DIN EN 2897-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa/235 °C; German version EN 2897:1996
DIN EN ISO 2010-1994Slotted raised countersunk head screws (common head style) – Product grade A (ISO 2010:1994); German version EN ISO 2010:1994
DIN EN 3038-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3038:1996
DIN 7975-1989Tapping screw connections; guideline values for core hole diameters and use
DIN 5200-1987Screwdrivers for slotted head screws, double offset; dimensions
DIN EN ISO 2009-1994Slotted countersunk flat head screws (common head style) – Product grade A (ISO 2009:1994); German version EN ISO 2009:1994
DIN 55406-2007Packaging – Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)
DIN 506-2004Driving components – Cap-bearings, half bearings – Fastening with four screws
DIN 967-2002Cross recessed pan head screws with collar – Product grade A
DIN 65309-1986Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel
DIN V 4001-207-1991CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
DIN 65393-2002Aerospace – Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C
DIN ISO 10045-1992Alpine skis; binding mounting area; requirements for test screws; identical with ISO 10045:1991
DIN 71436-1989Compression couplings with olives; hollow screw fittings and ring connection fittings for use with union nuts
DIN EN 2583-1997Aerospace series – Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997
DIN 931 Bb.1-1986Hexagon head bolts with shank; masses
DIN 65307-1986Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel
DIN EN 2653-1996Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996
DIN 4000-2 Bb.1-1999Tabular layouts of article characteristics – Part 2: Screws and nuts; attribution to technical standards on screws
DIN 7422-2002Bits with square drive for hexagon socket screws, hand operated
DIN EN 2932-1996Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996
DIN ISO 2351-1-2007Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
DIN 69051-3-1989Machine tools; ball screws; acceptance conditions and acceptance tests
DIN EN 3218-002-2006Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006
DIN 927-2006Slotted shoulder screws
DIN 34801-1999Bolts and screws with external hexalobular driving feature with large flange
DIN EN ISO 3506-4-2003Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003
DIN EN 60999-1-2000Connecting devices – Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units – Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm<(hoch)2> up to 35 mm<(hoch)2> (included) (IEC 60999-1:1999, modified); German version EN 60999-1:2000
DIN ISO 7049-1990Cross recessed pan head tapping screws; identical with ISO 7049:1983
DIN EN ISO 10642-2004Hexagon socket countersunk head screws (ISO 10642:2004); German version EN ISO 10642:2004
DIN EN 2889-2007Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006
DIN EN 3037-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated – Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996
DIN EN ISO 4759-3-2000Tolerances for fasteners – Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
DIN EN 61076-2-101-2006Connectors for electronic equipment – Part 2-101: Circular connectors – Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (IEC 61076-2-101:2003 + A1:2006); German version EN 61076-2-101:2003 + A1:2006
DIN EN 2884-1996Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996
DIN EN 3305-1996Aerospace series – Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996
DIN ISO 7026-1992Road vehicles; screw-in injection nozzle holders types 20, 21 and 27 for pintle nozzle size “S”, type “B”; identical with ISO 7026:1990
DIN EN 4307-2007Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4307:2005
DIN EN 28839-1991Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
DIN 924-2006Slotted raised countersunk head screws with full dog point
DIN ISO 10228-1995Cross-country skis – Binding mounting area – Requirements for test screws; identical with ISO 10228:1991
DIN 5903-2-1997Fish bolts – Part 2: With square head
DIN 70614-1989Automotive engineering; hexagon head screws with small widths across flats (not for new constructions)
DIN 653-2006Knurled thumb screws, low type
DIN 6908-1995Conical spring washers for screw and washer assemblies
DIN 5042-8-1985Combustion lights and gas lights; injector jet pipes and air control screws
DIN EN 2886-1996Aerospace series – Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa/235 °C; German version EN 2886:1996
DIN 974-1-1991Diameters of counterbores for hexagon socket head cap screws and screws with cheese head or pan head; manufacturing dimensions
DIN 85339-1996Hexagon head screw plugs – With retaining pin and bleeding hole
DIN 920-2006Slotted pan head screws with small head
DIN 89284-2007Cap srews for mounting holes and glands according to DIN 89280; Text in German and English
DIN EN 3218-009-2006Aerospace series – Connectors, rectangular, with metallic shells and screws-locking – Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors – Product standard; German and English version EN 3218-009:2006
DIN 6911-2004Hexagon socket screw keys with pilot
DIN 48334-1977Turnbuckles for overhead power lines
DIN EN 4306-2007Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005
DIN 65286-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c
DIN 3335-1968Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN EN 26157-3-1991Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN EN ISO 7085-2000Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999); German version EN ISO 7085:1999
DIN 7433-1978Adapters for Hexagon Insert Bits for Use with Spiral Ratchet Drivers
DIN EN 2650-1996Aerospace series – Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996
DIN 41673-1979Miniature fuses; screw type fuse-base, 6,3 A, 250 V, flat, for interchangeable cartridge fuse-links
DIN EN 2937-1994Aerospace series – Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994
DIN 962-2001Bolts, screws, studs and nuts – Designation, types and finishes
DIN 34817-2001Weld screws with metric thread
DIN EN ISO 4027-2004Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003
DIN ISO 1891-1979Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
DIN EN ISO 14587-2002Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); German version EN ISO 14587:2001
DIN 34813-1999Plastic cross recessed cheese head screws
DIN EN 3218-010-2006Aerospace series – Connectors, rectangular, with metallic shells and screws-locking – Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors – Product standard; German and English version EN 3218-010:2006
DIN 7996-1986Cross recessed pan head wood screws
DIN ISO 8764-2-2006Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
DIN EN ISO 7047-1994Countersunk raised head screws (common head style) with type H or type Z cross recess – Product grade A (ISO 7047:1994); German version EN ISO 7047:1994
DIN 4000-151-2005Tabular layouts of properties – Part 151: Connecting parts for hand- and machine-operated assembly tools for screws and nuts
DIN 65253-2002L-wrench for screws with internal serration
DIN 65004-1979Aerospace; pan head screws with TORQ-SET recess, long thread
DIN 502-2004Driving Components – Flange bearings – Fastened with two screws
DIN 68856-5-1983Hardware for furniture; terms for furniture fittings; height adjusters, furniture legs, underframes
DIN ISO 2936-2001Assembly tools for screws and nuts – Hexagon socket screw keys (ISO 2936:2001)
DIN EN 2929-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996
DIN EN 14512-2006Tanks for the transport of dangerous goods – Tank equipment for the transport of liquid chemicals – Hinged manhole covers and neckrings with pivoting bolts; English version of DIN EN 14512:2006-10
DIN 6307-2002Tommy nuts with movable clamping bolt
DIN 7513-1995Thread cutting screws – Hexagon screws and slotted head screws – Dimensions, requirements, testing
DIN ISO 1085-2007Assembly tools for screws and nuts – Double-ended wrenches – Size pairing (ISO 1085:1999) English version of DIN ISO 1085:2007-04
DIN EN 3303-1997Aerospace series – Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997
DIN EN ISO 887-2006Plain washers for metric bolts, screws and nuts for general purposes – General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07
DIN 48319-1962Hook screws
DIN EN ISO 4018-2001Hexagon head screws – Product grade C (ISO 4018:1999); German version EN ISO 4018:2000
DIN 65188-1986Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy
DIN ISO 2380-1-2006Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004)
DIN 7998-1975Threads and Thread Ends for Wood Screws
DIN 34812-1999Plastic pan head screws with cross recess
DIN 787-2005Bolts and screws for T-slots
DIN 65269-1987Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN EN 2939-1994Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994
DIN EN ISO 14580 Berichtigung 1-2006Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001, Corrigenda to DIN EN ISO 14580:2002-05; German version EN ISO 14580:2001/AC:2005
DIN EN ISO 6789-2003Assembly tools for screws and nuts – Hand torque tools – Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003); German version EN ISO 6789:2003
DIN EN ISO 4759-1-2001Tolerances for fasteners – Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
DIN 404-2006Slotted capstan screws
DIN 28139-2-1985Welding necks for glass lined vessels; form M manhole, handhole and assembly opening for clamp screw connections; connecting, dimensions
DIN 6367-2003Cutter retaining screws for milling machine arbors
DIN 65394-2003Aerospace – Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C
DIN EN 3308-1996Aerospace series – Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996
DIN ISO 8992-2005Fasteners – General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
DIN EN 2363-1989Aerospace series; locking clips for turnbuckles of control cables; dimensions
DIN 34824-200712 point socket for bolts and screws
DIN 921-2007Slotted pan head screws with large head
DIN 8377-2006Subland twist drills with Morse taper shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
DIN 58520-1-1994Screws for drawing instruments; part 1: T-bolts
DIN EN 2930-1996Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996
DIN 65558-1989Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN EN 3759-1996Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996
DIN 65533-1987Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
DIN EN ISO 14586-2002Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001
DIN EN 4304-2007Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4304:2005
DIN 2240-2-2001Geometrical Product Specification (GPS) – Handles – Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps
DIN EN ISO 4762-2004Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004
DIN 29782-1988Aerospace; wire thread inserts; free running or screw-locking; technical specification
DIN 43165-1985Electric traction; screws with cup point for overhead fittings
DIN ISO 1483-1990Slotted raised countersunk (oval) head tapping screws (common head style); identical with ISO 1483:1983
DIN EN ISO 1478-1999Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
DIN EN 4497-2007Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005
DIN EN 3725-2005Aerospace series – Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated – Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004
DIN EN ISO 2702-1994Heat-treated steel tapping screws – Mechanical properties (ISO 2702:1992); German version EN ISO 2702:1994
DIN EN ISO 7045-1994Pan head screws with type H or type Z cross recess – Product grade A (ISO 7045:1994); German version EN ISO 7045:1994
DIN 65289-1987Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 34810-1999Plastic hexagon head screws
DIN EN ISO 4028-2004Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003
DIN 65055-1992Aerospace; threaded control cable ends and turnbarrels; technical specification; inactive for new design
DIN 7500-2-1984Thread rolling screws for ISO metric thread; guideline values for hole diameters
DIN EN 2569-1992Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991
DIN 267-30-2001Fasteners – Technical delivery conditions – Part 30: Metric thread rolling screws of property class 10.9
DIN ISO 2380-2-2006Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
DIN 404 Berichtigung 1-2007Slotted capstan screws, Corrigenda to DIN 404:2006-08
DIN EN ISO 4757-1994Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994
DIN 73368-1986Overflow valves and hollow screw for fuel injection devices
DIN 65398-2003Aerospace – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/315 °C
DIN EN ISO 10666-2000Drilling screws with tapping screw thread – Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
DIN 5903-1-1997Fish bolts – Part 1: With round head and oval neck
DIN 34819-2002Hexalobular socket raised head tapping screws with collar
DIN 72331-2-1979Cable connectors for starter batteries; screw terminals for conductor cross sections from 50 to 120 mm<(hoch)2>
DIN 44879-1985Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated
DIN 34800-2005Bolts and screws with external hexalobular driving feature with small flange
STANDARDSDESCRIPTION
DIN EN 10270-1-2001Steel wire for mechanical springs – Part 1: Patented cold drawn unalloyed steel wire; German version EN 10270-1:2001
DIN 3021-3-1999Hose clamps – Spring band clamp – Part 3: System: Spring band clamp-hose-spigot
DIN 5297-1-1979Spring snap with fixed square eye
DIN EN 61076-2-101-2006Connectors for electronic equipment – Part 2-101: Circular connectors – Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (IEC 61076-2-101:2003 + A1:2006); German version EN 61076-2-101:2003 + A1:2006
DIN 4000-11-1987Tabular layouts of article characteristics for springs
DIN EN 12384-1999Copper and copper alloys – Determination of spring bending limit on strip; German version EN 12384:1999
DIN V 4001-302 Bb.1-1993CAD standard parts library; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers
DIN 58509-1994Fixed centre spring bow with interchangeable points for precision drawing instruments (P)
DIN EN ISO 8750-2007Spring-type straight pins – Coiled, standard duty (ISO 8750:2007); German version EN ISO 8750:2007
DIN 95365-1997Elastomer mounts – Hat mounts – Types A to K
DIN EN ISO 7500-1 Bb.2-1999Metallic materials – Verification of static uniaxial testing machines – Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing machines
DIN 2093-2006Disc springs – Quality specifications – Dimensions
DIN 2099-1-2003Helical springs made of round wire and rod – Part 1: Information to be given in order to obtain the cold formed compression spring required; Printed form A
DIN 81308-2003Rim-locks without latch-bolt for hinged doors on ships
DIN 27204-4-2005State of railway vehicles – Running gear – Part 4: Steel springing
DIN 31216-2-1980Spring clamps; individual parts and plates
DIN EN 10092-1-2004Hot rolled spring steel flat bars – Part 1: Flat bars – Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003
DIN 15112-1979Spring pulls; safety requirements, testing
DIN EN 4166-2006Aerospace series – Clips, spring tension, three parts – PTFE bushes; German and English version EN 4166:2004
DIN 34016-1980Laminated springs; spring link washer bearing plates for spring suspension
DIN V 4001-302-1993CAD standard parts file; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers
DIN 1571-1979Central Dimples for Spring Leaves
DIN 2099-3-2004Helical springs made of round wire and rod – Part 3: Information to be given in order to obtain the hot formed compression spring required, printed form C
DIN EN 10270-2-2001Steel wire for mechanical springs – Part 2: Oil hardened and tempered spring steel wire; German version EN 10270-2:2001
DIN EN ISO 10427-1-2003Petroleum and natural gas industries – Casing centralizers – Part 1: Bow-spring casing centralizers (ISO 10427-1:2001); German and English version EN ISO 10427-1:2001
DIN 58507-1994Spring bow compass with interchangeable points for precision drawing instruments (P)
DIN V 65900-20-2001Aerospace series – Clips, spring tension – Assembly recommandations (AECMA Technical Report TR 4587:2000)
DIN 20579-2-1986Buffer springs for mine cars; requirements
DIN EN 14817-2006Railway applications – Suspension components – Air spring control elements English version of DIN EN 14817:2006-08
DIN 18264-1978Building hardware; spring hinges for doors, single action
DIN 58556-1987Quick setting bow pencil and quick setting bow combination with interchangeable parts
DIN EN 13906-2-2002Cylindrical helical springs made from round wire and bar – Calculation and design – Part 2: Extension springs; German version EN 13906-2:2001
DIN 5287-1972Simplex hook spring hooks made of one piece
DIN EN 10270-3-2001Steel wire for mechanical springs – Part 3: Stainless spring steel wire; German version EN 10270-3:2001
DIN 58516-1990Pivot needles for fixed center spring bow
DIN EN 4167-2006Aerospace series – Clips, spring tension, three parts – Inner clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4167:2004
DIN ISO 2162-2-1994Technical product documentation – Springs – Part 2: Presentation of data for cylindrical helical compression springs; identical with ISO 2162-2:1993
DIN 42013-1988Spring washers for axial adjustment of ball bearings of small motors
DIN 81409-1977Spring type holders for trap-doors
DIN 58508-1994Spring-bow divider for precision drawing instruments (P)
DIN 20555-1989Wheel sets with taper roller bearings for mine cars; exterior spring suspension
DIN EN 13298-2003Railway applications – Suspension components – Helical suspension springs, steel; German version EN 13298:2003
DIN 9814-1981Centre post press tool sets with spring stripper
DIN 43801-1-1976Electrical measuring instruments; spiral springs; dimensions
DIN 95408-1999Spring mounts – Trust stirrup mounts – Type J
DIN EN ISO 8751-2007Spring-type straight pins – Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007
DIN ISO 366-3-1990Textile machinery and accessories; reeds; metal reeds with double-spring baulk; dimensions and designation; identical with ISO 366-3:1988
DIN EN 1654-1998Copper and copper alloys – Strip for springs and connectors; German version EN 1654:1997
DIN 2092-2006Disc springs – Calculation
DIN EN 10132-4-2003Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 4: Spring steels and other applications; German version EN 10132-4:2000 + AC:2002
DIN 3019-1972Industrial trucks; trapezoidblock-springs for axles of handcarts and trailers
DIN 18267-2005Window handles – Clickable and lockable window handles
DIN 4621-1995Laminated leaf springs – Alignment clips
DIN 18267 Berichtigung 1-2005Window handles – Clickable and lockable window handles, Corrigenda to DIN 18267:2005-01
DIN 20579-1-1986Buffer springs for mine cars; calculation
DIN 5299-1980Snap hook half-round wire, round wire and forged
DIN ISO 10069-1-2000Tools for pressing – Elastomer pressure springs – Part 1: General specification (ISO 10069-1:1991)
DIN V 65900-8-1995Aerospace series – Clips, spring tension, three parts – Assembly recommendations (AECMA Technical Report TR 4169:1995)
DIN ISO 6626-1990Internal combustion engines; piston rings; coil-spring-loaded oil control rings; identical with ISO 6626:1989
DIN 2099-2-2004Helical springs made of round wire and rod – Part 2: Information to be given in order to obtain the cold formed tension springs required, printed form B
DIN 41079-1974Fastening of clockworks an dials for electric secundary clocks; mounting dimensions
DIN 2097-1973Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs
DIN 81307-2003Rim-locks with latch-bolt for hinged doors on ships
DIN 81312-1987Rim-locks without latch-bolt for heavy hinged doors
DIN 58543-1987Spring bow divider for school drawing instruments
DIN 5290-1-1983Snap hook from light metal; with setting nut; dimensions, requirements and testing
DIN 2098-2-1970Helical Springs Made of Round Wire; Dimensions for Cold-coiled compression springs of less than 0.5 mm Wire Diameter
DIN 49999-2-1983Glass luminaires; round hole edges for threaded ring and spring fastening; connection dimensions
DIN 5543-1980Laminated springs; spring link washers and intermediate spring link washers for spring suspension
DIN EN 2591-413-1998Aerospace series – Elements of electrical and optical connection; test methods – Part 413: Holding force of grounding spring system; German version EN 2591-413:1998
DIN 6343-1993Collets-dead length type
DIN EN 60352-7-2003Solderless connections – Part 7: Spring clamp connections; General requirements, test methods and practical guidance (IEC 60352-7:2002); German version EN 60352-7:2002
DIN 4000-93-2006Tabular layouts of properties – Part 93: Collets, Clamping sleeves, Ferrules
DIN EN 13906-3-2002Cylindrical helical springs made from round wire and bar – Calculation and design – Part 3: Torsion springs; German version EN 13906-3:2001
DIN V 65900-19-2001Aerospace series – Clips, spring tension – Design recommandations (AECMA Technical Report TR 4586:2000)
DIN 27204-6-2004State of railway vehicles – Running gear – Part 6: Pneumatic suspension system
DIN 6908-1995Conical spring washers for screw and washer assemblies
DIN EN 14200-2004Railway applications – Suspension components – Parabolic springs, steel; German version EN 14200:2004
DIN 6900-5-2004Screw and washer assemblies with coarse thread – Part 5: With captive conical spring washer
DIN ISO 11901-1-2005Tools for pressing – Gas springs – Part 1: General specifications (ISO 11901-1:2003)
DIN 8297-1971Winding buttons for wrist-watches
DIN EN 4420-2004Aerospace series – Clips, spring tension, in alloy steel FE-PA3903; German and English version EN 4420:2003
DIN 5297-2-1979Spring snap with fixed round eye and oval eye
DIN 71805-1990Angle joints; housings, circlips
DIN 6310-2002Spring-loaded catch for jigs
DIN 3021-1-1999Hose clamps – Spring band clamp – Part 1: Dimensions, marking, materials, types
DIN EN 10151-2003Stainless steel strip for springs – Technical delivery conditions; German version EN 10151:2002
DIN 81310-2003Rim-locks with hook latch-bolt for sliding doors on ships
DIN 2098-1-1968Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards
DIN EN 4585-2004Aerospace series – Clips, spring tension – Technical specification; German and English version EN 4585:2003
DIN 95362-1996Elastomer mounts, hollow-prismatic
DIN 2091-1981Circular section torsion bar springs; Calculation and design
DIN 81309-2003Rim-locks with latch-bolt for hinged doors of lavatory and bath on ships
DIN 95366-1996Elastomer mounts – Pot bearings and fail safe pot bearings, types A to G
DIN 8328-3-1984Numbering of watches and clocks; energy supply, winding mechanism, oscillating system, protective measures and additional functions
DIN 34818-2002Sheet spring nuts with tappping screw thread
DIN 2096-1-1981Helical compression springs made of round wire and rod; Quality requirements for hot formed compression springs
DIN 267-26-2005Fasteners – Technical specifications – Part 26: Conical spring washers for bolted connections
DIN EN 10089-2003Hot rolled steels for quenched and tempered springs – Technical delivery conditions; German version EN 10089:2002
DIN 18265-1978Building hardware; spring hinges for doors, double action
DIN 46336-1987Plugbox for springterminals
DIN 81311-2005Rim-locks with latch-bolt for heavy hinged doors on ships
DIN 2093 Berichtigung 1-2007Disc springs – Quality specifications – Dimensions, Corrigenda to DIN 2093:2006-03
DIN EN 4168-2006Aerospace series – Clips, spring tension, three parts – Outer clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4168:2004
DIN EN ISO 8752-1998Spring-type straight pins – Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997
DIN EN ISO 8748-2007Spring-type straight pins – Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007
DIN 2194-2002Helical springs made of round wire and rod – Cold coiled torsional springs (leg springs) – Quality specifications
DIN 2095-1973Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Compression Springs
DIN EN 10092-2-2004Hot rolled spring steel flat bars – Part 2: Ribbed and grooved spring leaves, Dimensions and tolerances on shape and dimensions; German version EN 10092-2:2003
DIN 6796-1987Conical spring washers for bolt/nut assemblies
DIN ISO 11901-2-2005Tools for pressing – Gas springs – Part 2: Specification of accessories (ISO 11901-2:2004)
DIN 20556-1989Wheel sets with taper roller bearings for mine cars; interior spring suspension
DIN 18263-1-1997Building hardware – Controlled door closing devices with hydraulic damping – Part 1: Surface(top) mounted door closer with crank drive and spiral spring (pot-type door closer)
DIN 8260-1987Setting stem (winding stem) for watches; main dimensions
DIN 2092 Berichtigung 1-2007Disc springs – Calculation, Corrigenda to DIN 2092:2006-03
DIN 11024-1973Spring Cotters
DIN EN 13906-1-2002Cylindrical helical springs made from round wire and bar – Calculation and design – Part 1: Compression springs; German version EN 13906-1:2002
DIN 37082-1975Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt
DIN 2090-1971Helical Compression Springs made of Flat Bar Steel; Calculation
DIN 69882-6-2005Tool holders with hollow taper shanks according to DIN 69893-1 – Part 6: Type E, clamping chuck for collets with 8° setting angle – Dimensions
DIN 46238-1985Springterminals for plastic insulated telecommunication cords
DIN 3021-2-1999Hose clamps – Spring band clamp – Part 2: Technical delivery conditions
DIN 58544-1996Drop bow for standard drawing instruments
DIN ISO 2162-1-1994Technical products documentation – Springs – Part 1: Simplified representation; identical with ISO 2162-1:1993
DIN 18262-1969Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors
DIN ISO 10243-1993Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding; identical with ISO 10243:1991
DIN 5290-2-1977Light metal spring hook without setting nut; dimensions, technical conditions of delivery
DIN 9835-1 Bb.1-1987Elastomer pressure springs for press tools; spring characteristics
DIN 9835-3-1984Elastomer pressure springs for press tools; testing and requirements
DIN 95361-1997Elastomer mounts – Bars
DIN ISO 10069-2-2000Tools for pressing – Elastomer pressure springs – Part 2: Specification of accessories (ISO 10069-2:1991)
DIN ISO 93-2-2006Textile machinery and accessories – Cylindrical sliver cans – Part 2: Spring bottoms (ISO 93-2:2006) English version of DIN ISO 93-2:2006-09
DIN 20553-1989Wheel sets with taper roller bearings for mine cars; without springs
DIN 5289-1979Scissors snap
STANDARDSDESCRIPTION
DIN 28158-1984One piece glass lined anchor agitator; dimensions
DIN 81834-2000Components for anchoring equipment – Terms and definitions
DIN EN 14606-2004Inland navigation vessels – Studless anchor chain – Accessories; German version EN 14606:2004
DIN 7952-1-1986Sheet metal anchorage with threads; dimensions
DIN 24539-2-1985Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions designations mounting depth
DIN V 81855-1999Anchor chain cables grade K4 – Chain outboard shots
DIN 24539-1-1985Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions designations mounting depth
DIN 21522-1972Roof bolt plates for mining and tunnel support
DIN EN 15272-2-2007Inland navigation vessels – Equipment for rope leading – Part 2: Fairlead; German version EN 15272-2:2007
DIN 65240-2002Aerospace – Anchor nuts with MJ thread deep counterbore self-locking floating two lug steel; Classification: 1100 MPa/235 °C
DIN 81860-2-1999End fastenings for anchor chain cables on board ships – Part 2: Components
DIN 21521-2-1993Rock bolts for mining and tunnel support; general specifications for steel-bolts; tests testing methods
DIN EN ISO 15084-2003Small craft – Anchoring mooring and towing – Strong points (ISO 15084:2003); German version EN ISO 15084:2003
DIN 81850-2007Stud link anchor chain cables Grade K4 – End links; Text in German and English
DIN V 81841-1999Anchor chain cables grade K4 – Requirements and test
DIN 48328-1943Telecommunication and power current overhead lines below 1 kV; anchor logs
DIN EN 15271-2007Inland navigation vessels – Studless anchor chain – Anchor equipment; German version EN 15271:2007
DIN 84525-1999Windlasses and anchor capstans – Cable lifters for anchor chains – Design dimensions
DIN 65347-2002Aerospace – Anchor nuts with MJ thread deep counterbore self-locking single lug steel; Classification: 1100 MPa/235 °C
DIN 24541-1985Equipment for steelworks and rolling mills; shuttering steeves for anchor boxes according to DIN 24539; dimensions designation
DIN EN 14330-2004Inland navigation vessels – Studless anchor chain – Round steel link chain; German version EN 14330:2003
DIN EN 13573-2001Inland navigation vessels – Anchoring coupling towing hauling and mooring systems; German version EN 13573:2001
DIN ISO 4568-1995Shipbuilding – Sea-going vessels – Windlasses and anchor capstans (ISO 4568:1986)
DIN EN 959-2007Mountaineering equipment – Rock anchors – Safety requirements and test methods; German version EN 959:2007
DIN 21521-1-1990Rock bolts for mining and tunnelling; terms
DIN 81846-2-2007Stud link anchor chain cables Grade K4 – Assembly applied forces and breaking forces – Part 2: Type B without chain outboard shots; Text in German and English
DIN V 81851-1999Anchor chain cables grade K4 – Kenter type joining shackles
DIN 65243-2002Aerospace – Anchor nuts with MJ thread deep counterbore self-locking floating single lug steel; Classification: 1100 MPa/235 °C
DIN EN 1881-2007Products and systems for the protection and repair of concrete structures – Test methods – Testing of anchoring products by the pull-out method; English version of DIN EN 1881:2007-01
DIN EN 14874-2006Inland navigation vessels – Studless anchor chain – Cable lifter; German version EN 14874:2005
DIN EN 1504-6-2006Products and systems for the protection and repair of concrete structures – Definitions requirements quality control and evaluation of conformity – Part 6: Anchoring of reinforcing steel bar; English version of DIN EN 1504-6:2006-11
DIN EN 1537-2001Execution of special geotechnical works – Ground anchors; German version EN 1537:1999 + AC:2000
DIN 5683-2-1966Buoy chains shackles swivels swivel hooks
DIN 65343-2002Aerospace – Anchor nuts with MJ thread deep counterbore self-locking two lug reduced steel; Classification: 1100 MPa/235 °C
DIN 24536-1985Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings
DIN 81902-1998Roller fairleads
DIN 65238-2002Aerospace – Anchor nuts with MJ thread deep counterbore self-locking non-floating corner steel; Classification: 1100 MPa/235 °C
DIN 81835-2001Anchor chain cables – Basis for calculation units
DIN ISO 3730-1990Shipbuilding; mooring winches; identical with ISO 3730:1988
DIN 81860-1-1999End fastenings for anchor chain cables on board ships – Part 1: Assembly
DIN V 81833-1999Components for anchoring equipment – Survey
DIN EN 15361-2007Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete; German version EN 15361:2007