BS Standards

STANDARDSDESCRIPTION
BS 2TA 28-1974 Specification for forging stock and wire of titanium-aluminium-vanadium alloy tensile strength 1100-1300 MPa limiting ruling section 20 mm primarily intended for the manufacture of fasteners complying with the requirements of the ‘A’ series of British Standards
BS EN ISO 898-6-1996 Mechanical properties of fasteners – Nuts with specified proof load values – Fine pitch thread
BS EN 14250-2005 Timber structures – Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS 7371-8-1998 Coatings on metal fasteners – Specification for sherardized coatings
BS EN 792-13-2000 Hand-held non-electric power tools – Safety requirements – Fastener driving tools
BS EN ISO 6157-2-2004 Fasteners – Surface discontinuities – Nuts
BS EN ISO 4753-2000 Fasteners – Ends of parts with external ISO metric screw thread
BS EN 13481-4-2002 Railway applications – Track – Performance requirements for fastening systems – Part 4: Fastening systems for steel sleepers
BS EN 13481-5-2002 Railway applications – Track – Performance requirements for fastening systems – Fastening systems for slab track
BS EN ISO 10684-2006 Fasteners – Hot dip galvanized coatings
BS EN 409-1993 Timber structures – Test methods – Determination of the yield moment of dowel type fasteners – Nails
BS EN 13481-1-2002 Railway applications – Track – Performance requirements for fastening systems – Definitions
BS EN 1075-2000 Timber structures – Test methods – Joints made with punched metal plate fasteners
BS 7371-10-1994 Coatings on metal fasteners – Specification for organic coatings
BS EN 792-6-2000 Hand-held non-electric power tools – Safety requirements – Assembly power tools for threaded fasteners
BS EN 20898-2-1994 Mechanical properties of fasteners – Nuts with specified proof load values – Coarse thread
BS EN 13146-6-2002 Railway applications – Track – Test methods for fastening systems – Effect of severe environmental conditions
BS EN ISO 3269-2001 Fasteners – Acceptance inspection
BS SP 164-1978 Specification for design and performance requirements for turnlock, stud-type panel fasteners metric series
BS 6268-1982 Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners
BS EN 28839-1992 Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals
BS EN 13481-2-2002 Railway applications – Track – Performance requirements for fastening systems – Fastening systems for concrete sleepers
BS EN 14831-2005 Fasteners – Tightening performance – Torque/Angle simplified test method
BS EN ISO 15330-1999 Fasteners – Preloading test for the detection of hydrogen embrittlement – Parallel bearing surface method
BS EN ISO 16426-2002 Fasteners – Quality assurance system
BS ISO 8992-2005 Fasteners – General requirements for bolts, screws, studs and nuts
BS EN ISO 16047-2005 Fasteners – Torque/clamp force testing
BS EN 12549-1999 Acoustics – Noise test code for fastener driving tools – Engineering method
BS EN ISO 4759-3-2000 Tolerances for fasteners – Plain washers for bolts, screws and nuts – Product grades A and C
BS ISO 15629-2002 Pallets for materials handling – Quality of fasteners for assembly of new and repair of used, flat, wooden pallets
BS EN 13481-3-2002 Railway applications – Track – Performance requirements for fastening systems – Fastening systems for wood sleepers
BS EN 26157-1-1992 Fasteners – Surface discontinuities – Bolts, screws and studs for general requirements
BS 3F 121-1995 Specification for metallic slide fasteners for aerospace purposes
BS 6462-1985 Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners
BS EN 1383-1999 Timber structures – Test methods – Pull-through resistance of timber fasteners
BS EN ISO 3506-2-1998 Mechanical properties of corrosion-resistant stainless-steel fasteners – Nuts
BS A 273-1978 Specification for gauging practice for 100 ° countersunk head fasteners for flushness control
BS 7776-1995 Glossary of torque terminology for threaded fasteners
BS EN ISO 898-1-1999 Mechanical properties of fasteners made of carbon steel and alloy steel – Bolts, screws and studs
BS EN 26157-3-1992 Fasteners – Surface discontinuities – Bolts, screws and studs for special requirements
BS EN ISO 4042-2000 Fasteners – Electroplated coatings
BS EN ISO 10683-2000 Fasteners – Non-electrolytically applied zinc flake coatings
BS EN ISO 3506-1-1998 Mechanical properties of corrosion-resistant stainless-steel fasteners – Bolts, screws and studs
BS EN 20898-7-1995 Mechanical properties of fasteners – Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS 7371-6-1998 Coatings on metal fasteners – Specification for hot dipped galvanized coatings
BS EN ISO 5845-1-1999 Technical drawings – Simplified representation of the assemby of parts with fasteners – General principles
BS A 272-1977 Specification for Hi-torque speed drive recess: dimensions and gauging for countersunk head fasteners
BS EN ISO 4759-1-2001 Tolerances for fasteners – Bolts, screws, studs and nuts – Product grades A, B and C
BS EN ISO 16048-2003 Passivation of corrosion-resistant stainless-steel fasteners
BS 7774-1994 Threaded fasteners – Axial load fatigue testing – Test methods and evaluation of results
BS EN ISO 12777-1-1995 Methods of test for pallet joints – Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
BS S 159-1981 Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners 1100-1300 MPa: limiting ruling section 50 mm
BS EN ISO 898-5-1999 Mechanical properties of fasteners made of carbon steel and alloy steel – Set screws and similar threaded fasteners not under tensile stresses
BS EN 20273-1992 Fasteners – Clearance holes for bolts and screws
BS EN 792-1-2000 Hand-held non-electric power tools – Safety requirements – Assembly power tools for non-threaded mechanical fasteners
BS DD CEN/TS 15087-2006 Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing – Test method for mechanical fasteners
BS 7371-4-1994 Coatings on metal fasteners – Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings
BS EN 10269-1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS 7371-1-1991 Coatings on metal fasteners – Specification for general requirements and selection guidelines
BS EN 13446-2002 Wood-based panels – Determination of withdrawal capacity of fasteners
BS EN ISO 3506-4-2003 Mechanical properties of corrosion-resistant stainless-steel fasteners – Tapping screws
BS EN 4176-2005 Aerospace series – Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating – Collars in titanium TI-P99002 or aluminium alloy 2024 – Metric series – Technical specification
BS EN 28970-1991 Timber structures – Testing of joints made with mechanical fasteners – Requirements for wood density
BS EN 383-2007 Timber structures – Test methods – Determination of embedment strength and foundation values for dowel type fasteners
BS 6587-1985 Method of acceptance inspection for fasteners
BS EN 12512-2001 Timber structures – Test methods – Cyclic testing of joints made with mechanical fasteners
BS EN 912-2000 Timber fasteners – Specifications for connections for timber
BS EN ISO 3506-3-1998 Mechanical properties of corrosion-resistant stainless-steel fasteners – Set screws and similar fasteners not under tensile stress
BS 7371-2-1993 Coatings on metal fasteners – Specification for torque/clamping force relationship
BS EN 20225-1992 Fasteners – Bolts, screws, studs and nuts – Symbols and designations of dimensions
BS EN ISO 10964-1997 Adhesives – Determination of torque strength of anaerobic adhesives on threaded fasteners
BS 7371-7-1994 Coatings on metal fasteners – Specification for mechanically applied zinc coatings
BS EN 13271-2002 Timber fasteners – Characteristic load-carrying capacities and slip-moduli for connector joints
BS EN 26891-1991 Timber structures – Joints made with mechanical fasteners – General principles for the determination of strength and deformation characteristics
BS EN 1382-1999 Timber structures – Test methods – Withdrawal capacity of timber fasteners
BS 7371-9-1996 Coatings on metal fasteners – Specification for phosphate or phosphate and oil coatings
BS 3HR 601-1989 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners maximum diameter or minor sectional dimension 30 mm nickel base Cr 19.5, Ti 2.2, Al 1.4
BS DD ISO/TS 17104-2006 Rotary tool for threaded fasteners – Hydraulic impulse tools – Performance test method
BS SP 141-1970 Specification for design and performance requirements for toggle type panel fasteners
BS EN 4174-2006 Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
STANDARDSDESCRIPTION
BS 5125-1990 Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines
BS AU 50-2.3-1994 Tyres and wheels – Wheels and rims – Specification for road-wheel nuts, studs and bolts for commercial vehicles
BS 3A 117-1962 Specification for corrosion-resisting steel pan head bolts Unified threads for aircraft
BS 2A 229-1972 Specification for hexagonal head steel bolts 160000 lbf/in2 1100/MPa
BS HR 650-1972 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3 limiting ruling section 20 mm
BS 5620-1995 Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines
BS 1473-1972 Specification for wrought aluminium and aluminium alloys for general engineering purposes – rivet, bolt and screw stock
BS 2A 26-1962 Specification for corrosion-resisting steel hexagonal-headed bolts B.A and B.S.F. threads for aircraft
BS 1768-1963 Specification for Unified precision hexagon bolts, screws, & nuts UNC & UNF threads – Normal series
BS A 299-1989 Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads
BS 2A 58-1962 Specification for steel hexagonal nuts B.S.F. threads for shear bolts for aircraft
BS EN 3007-1996 Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT A286, Silver plated – Classification: 900 MPa at ambient temperature/650 °C
BS EN 3833-2005 Aerospace series – Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 Inconel 718, passivated – Classification: 1550 MPa at ambient temperature / 650 °C – Technical specification
BS EN ISO 4759-3-2000 Tolerances for fasteners – Plain washers for bolts, screws and nuts – Product grades A and C
BS EN 3444-2006 Aerospace series – Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated – Classification: 1250 MPa at ambient temperature / 650 ?
BS 3S 105-1969 Specification for carbon steel bar for the manufacture of forged bolts only
BS 2A 61-1962 Specification for aluminium alloy hexagonal headed bolts B.A. and B.S.F. threads for aircraft
BS 5380-1984 Specification for hydraulic port and stud coupling using ‘O’-ring sealing and ‘G’ series fastening threads
BS 4882-1990 Specification for bolting for flanges and pressure containing purposes
BS EN 14399-1-2005 High-strength structural bolting assemblies for preloading – General requirements
BS 2693-1-1956 Specification for screwed studs – General purpose studs
BS S 148-1969 Specification for low nickel-chromium steel bar for the manufacture of forged bolts only
BS EN 2933-1996 Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT Inconel 718 – Classification:1275 MPa at ambient temperature/650 °C
BS 7644-2-1993 Direct tension indicators – Specification for nut face and bolt face washers
BS 2A 57-1962 Specification for steel hexagonal-headed shear bolts B.S.F. threads for aircraft
BS EN 3009-1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT Inconel 718, silver plated – Classification – 1275 MPa at ambient temperature/650 °C
BS A 300-1989 Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads
BS 3905-1995 Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines
BS SP 114-1955 Specification for eye bolts Unified threads for aircraft
BS A 305-1994 Bolts – Test methods
BS 4A 113-1999 Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive, bolts
BS EN 2932-1996 Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT A286, silver plated – Classification: 900 MPa at ambient temperature/650 °C
BS A 226-1965 Specification for steel hexagon head bolts short thread: Class 3A
BS EN 14399-5-2005 High-strength structural bolting assemblies for preloading – Plain washers
BS 5655-8-1983 Lifts and service lifts – Part 8: Specification for eyebolts for lift suspension
BS 7842-1996 Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
BS DD CEN/TS 1591-4-2007 Flanges and their joints – Design rules for gasketed circular flange connections – Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
BS 3A 108-1962 Specification for steel bolts Unified hexagons and Unified threads with close tolerance shanks for aircraft
BS EN 3008-1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT Inconel 718 – Classification:1275 MPa at ambient temperature/650 °C
BS 4A 170-1999 Specification for aluminium alloy, mushroom-headed, slotted drive, bolts unified thread
BS EN 28839-1992 Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals
BS EN 2934-1996 Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT Inconel 718, silver plated – Classification:1275 MPa at ambient temperature/650 °C
BS A 308-1994 Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS EN 3724-2004 Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated – Strength class: 1100 MPa at ambient temperature
BS 7795-1995 Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
BS A 358-2-2000 MJ threads – Limit dimensions for bolts and nuts
BS 2A 230-1974 Specification for 100 ° countersunk head steel bolts {1100 MPa with Hi-torque speed drive recesses}
BS A 303-1994 Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS ISO 8820-6-2007 Road vehicles – Fuse-links – Single-bolt fuse-links
BS EN ISO 9974-3-2000 Connections for general use and fluid power – Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing – Stud ends with metal-to-metal sealing type B
BS 2693-2-1964 Specification for screwed studs – Recommendations for high grade studs with Class 5 interference fit threads to American Standard ASA B1.12
BS EN ISO 13918-1998 Welding – Studs and ceramic ferrules for arc stud welding
BS A 232-1968 Specification for 100 ° countersunk head steel bolts 160 000 lbf/in2 110 hbar with Torq-set recesses
BS 3A 109-1985 Specification for steel shear bolts Unified hexagons and Unified threads
BS A 309-1994 Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS 2A 60-1962 Specification for cadmium-plated steel hexagonal-headed shear bolts B.S.F. threads for aircraft
BS EN 2413-1995 Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa at ambient temperature/235 °C
BS A 254-1976 Specification – Hexagonal head titanium alloy bolts 160 000 lbf/in2 1100 MPa
BS 2A 174-1962 Specification for 100 ° countersunk head corrosion-resisting steel bolts Unified threads for aircraft
BS A 266, A 267, A 268, A 269, A 270, A 271-1977 Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/inUP2 1100 MPa with Hi-torque speed drive recesses
BS 4A 111-1993 Specification for cadmium-plated steel bolts Unified hexagons and Unified threads with close tolerance shanks
BS EN 4498-2005 Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating – Classification: 1 550 MPa at ambient temperature / 315 °C
A 211-1961 Specification for 100 countersunk head steel bolts Unified threads and cruciform recesses for aircraft
BS AU 190-1983 Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg
BS 7670-1-1993 Steel nuts and bolts for resistance projection welding – Specification for dimensions and properties
BS 7345-1990 Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts
BS EN 2874-1996 Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated – Classification: 1550 MPa at ambient temperature /315 °C
BS A 266, A 267 […]-1977 Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/inUP2 1100 MPa with Hi-torque speed drive recesses
BS A 307-1994 Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS EN 15048-1-2007 Non-preloaded structural bolting assemblies – General requirements
BS EN 4322-2004 Aerospace series – Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in titanium alloy TI-P64001, anodized , MoS2 coated – Strength class – 1 100 MPa at ambient temperature
BS EN 26157-3-1992 Fasteners – Surface discontinuities – Bolts, screws and studs for special requirements
BS EN 4009-2005 Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 Inconel 718 – Classification: 1550 MPa at ambient temperature
BS 3A 212-1993 Specification for cadmium-plated steel bolts, 55/65 tonf/in2 Unified hexagons, 3A Unified threads and close tolerance shanks
BS EN 20273-1992 Fasteners – Clearance holes for bolts and screws
BS ISO 885-2000 General purpose bolts and screws – Metric series – Radii under the head
BS EN 3907-2004 Aerospace series – Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated – Classification: 1100MPa at ambient temperature/350 °C
BS EN 1515-2-2002 Flanges and their joints – Bolting – Classification of bolt materials for steel flanges, PN designated
BS EN ISO 10434-2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
BS EN 2929-1996 Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT Waspaloy – Classification: 1210 MPa at ambient temperature/730 °C
BS EN ISO 14555-2006 Welding – Arc stud welding of metallic materials
BS 2A 173-1962 Specification for 100 ° countersunk head steel bolts Unified threads for aircraft
BS EN 3011-1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT Waspaloy, silver plated – Classification:1210 MPa at ambient temperature/730 °C
BS EN 3052-1994 Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa at ambient temperature/425 °C
BS 6490-1984 Specification for shapes and dimensions excluding thread dimensions of plough bolt heads for earth-moving machinery
BS EN 2925-1994 Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT A 286 – Classification: 900 MPa at ambient temperature/650 °C
BS EN 3740-1997 Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification: 1100 MPa at ambient temperature/315 °C
BS 4A 169-2002 Specification for aluminium alloy bolts Unified hexagons and Unified threads for aircraft
BS EN 20225-1992 Fasteners – Bolts, screws, studs and nuts – Symbols and designations of dimensions
BS 2A 231-1993 Rolled threads for bolts – Lead and runout requirements
BS EN 4402-2006 Lockbolts, 100 °countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series – Classification: 1100 MPa at ambient temperature / 315 °C
BS EN 4401-2006 Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series – Classification: 1100 MPa at ambient temperature / 315 °C
BS EN 3063-1994 Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT Waspaloy – Classification: 1210 MPa at ambient temperature/730 °C
BS A 363-2000 Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa – Procurement specification
BS EN 2935-1996 Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT Waspaloy – Classification:1210 MPa at ambient temperature/730 °C
BS A 227-1965 Specification for steel pan head bolts short thread: Class 3A
BS 2A 59-1962 Specification for cadmium-plated steel hexagonal-headed bolts B.A. and B.S.F. threads with close tolerance shanks for aircraft
BS 2S 147-1976 Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS EN 3010-1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT Waspaloy – Classification: 1210 MPa at ambient temperature/730 °C
BS EN ISO 8765-2001 Hexagon head bolts with metric fine pitch thread – Product grades A and B
BS 2485-1987 Specification for tee slots, tee bolts, tee nuts and tenons
BS 2S 149-1976 Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS EN 3379-1996 Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT Waspaloy, for increased height nuts – Classification: 1210 MPa at ambient temperature/730 °C
BS 3A 171-1962 Specification for aluminium alloy pan head bolts Unified threads for aircraft
BS EN 15048-2-2007 Non-preloaded structural bolting assemblies – Suitability test
BS EN 1515-3-2005 Flanges and their joints – Bolting – Classification of bolt materials for steel flanges, class designated
BS EN 20898-7-1995 Mechanical properties of fasteners – Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS EN ISO 9974-1-2000 Connections for general use and fluid power – Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing – Threaded ports
BS 7419-1991 Specification for holding down bolts
BS EN 2931-1994 Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT A286 – Classification: 900 MPa at ambient temperature/650 °C
BS EN 2583-1997 Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 Inconel 718 – Classification: 1275 MPa at ambient temperature/650 °C – Technical specification
BS 4604-1-1970 Specification for the use of high strength friction grip bolts in structural steelwork – Metric series – General grade
BS A 301-1989 Procurement of corrosion and heat-resisting steel bolts with strength classification 1100 MPa and MJ threads
BS EN ISO 4016-2001 Hexagon head bolts – Product grade C
BS 2A 25-1962 Specification for steel hexagonal-headed bolts B.A. and B.S.F. threads for aircraft
BS EN 14219-2003 Hexagon bolts with flange with metric fine pitch thread – Small series
BS 4A 100-2003 Aerospace series – Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
BS EN 1515-1-2000 Flanges and their joints – Bolting – Selection of bolting
BS EN 2930-1996 Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT Waspaloy, silver plated – Classification:1210 MPa at ambient temperature/730 °C
BS EN 4173-2006 Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1100 MPa at ambient temperature / 315 °C
BS 2A 30-1962 Specification for steel hexagonal-headed bolts B.A. and B.S.F threads with close tolerance shanks for aircraft
BS EN 4172-2006 Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1 100 MPa at ambient temperature / 315 °C
BS EN 14399-2-2005 High-strength structural bolting assemblies for preloading – Suitability test for preloading
BS EN 3112-1995 Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa at ambient temperature/235 °C
BS EN 26157-1-1992 Fasteners – Surface discontinuities – Bolts, screws and studs for general requirements
BS EN ISO 898-1-1999 Mechanical properties of fasteners made of carbon steel and alloy steel – Bolts, screws and studs
BS EN ISO 887-2000 Plain washers for metric bolts, screws and nuts for general purposes – General plan
BS 2A 110-1962 Specification for steel nuts Unified hexagons and Unified threads for shear bolts for aircraft
BS 7814-1995 Specification for bolts and screws incorporating either underhead locking or anti-rotation features
BS EN ISO 9974-2-2000 Connections for general use and fluid power – Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing – Stud ends with elastomeric sealing type E
BS A 101-1969 Specification for general requirements for titanium bolts
BS EN 3832-2005 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 Inconel 718 – Classification: 1550 MPa at ambient temperature / 650 °C
BS 2A 241-2005 General requirements for steel protruding-head bolts of tensile strength 1250 MPa 180000 lbf/in2 or greater – Specification
BS 4A 102-2002 Specification for steel bolts Unified hexagons and Unified threads for aircraft
BS 3454-1995 Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors including 380/660 V and 640/1100 V, 300 A adaptors for use in coal mines
BS 7670-2-1997 Steel nuts and bolts for resistance projection welding – Specification for welding of weld nuts and weld bolts
BS EN 2927-1996 Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT Inconel 718 – Classification:1275 MPa at ambient temperature/650 °C
BS 7793-1-1995 Vitreous enamel coatings for use on bolted steel panels – Specification for coatings on bolted steel panels for use in agricultural slurry tanks
BS EN ISO 4014-2001 Hexagon head bolts – Product grades A and B
BS 6040-1981 Nomenclature for bolts, screws, nuts and accessories
BS 4A 112-1992 Specification for cadmium-plated steel shear bolts Unified hexagons and Unified threads
BS 5268-4.2-1990 Structural use of timber – Fire resistance of timber structures – Recommendations for calculating fire resistance of timber stud walls and joisted floor constructions
BS EN 3006-1994 Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT A286 – Classification: 900 MPa at ambient temperature/650 °C
BS 2S 116-1964 Specification for aircraft material – ’40’ carbon steel bright bars for machining 55-65 tonf/sq in: limiting ruling section 3/4 inch primarily intended for the manufacture of machined bolts
BS A 332-1999 Aerospace – Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa – Procurement specification
BS 826-1978 Specification for steel single tier bolted shelving angle upright type
BS A 310-1995 Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa – Dimensions
BS EN 2859-2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa at ambient temperature / 235 °C
BS EN 2928-1996 Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT Inconel 718, silver plated – Classification: 1275 MPa at ambient temperature/650 °C
BS 4A 114-1999 Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts strength class 880/1080
BS EN 3818-2005 Aerospace series – Bolts, MJ threads, in titanium alloy TI-P64001 – Strength class: 1100 MPa at ambient temperature – Technical specification
BS EN 2888-2006 Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated – Classification: 600 MPa at ambient temperature / 425 °C
BS A 304-1994 Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS EN 2549-2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated – Classification: 1100 MPa at ambient temperature / 315 °C
BS EN 14399-3-2005 High-strength structural bolting for preloading – System HR – Hexagon bolt and nut assemblies
BS 3S 102-1969 Specification for carbon-molybdenum steel bar for the manufacture of forged bolts only
BS 4A 228-1997 Specification for steel double hexagon bolts – 1250 MPa 180,000 lbf/in2 for aircraft
BS EN 4321-2004 Aerospace series – Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 Inconel 718, silver plated – Classification – 1 550 Mpa at ambient temperature/650 °C
BS EN 1662-1998 Hexagon bolts with flange – Small series
BS 7715-1994 Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
BS ISO 262-1999 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
BS 2A 175-1962 Specification for 100 ° countersunk head aluminium alloy bolts Unified threads for aircraft
BS EN ISO 10664-2005 Hexalobular internal driving feature for bolts and screws
BS A 254, A 255 […]-1976 Specification – Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 1100 MPa
BS EN 10319-2-2006 Metallic materials – Tensile stress relaxation testing – Procedure for bolted joint models
BS EN 2887-1995 Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa at ambient temperature/425 °C
BS EN 1665-1997 Hexagon bolts with flange – Heavy series
BS EN 15282-2007 Vitreous and porcelain enamels – Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
BS 6487-1984 Specification for split pin holes and wire holes in bolts, screws and studs
BS EN 2926-1996 Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT A286, silver plated – Classification: 900 MPa at ambient temperature/650 °C
BS ISO 8992-2005 Fasteners – General requirements for bolts, screws, studs and nuts
BS ISO 5894-2000 Ships and marine technology – Manholes with bolted covers
BS EN ISO 4759-1-2001 Tolerances for fasteners – Bolts, screws, studs and nuts – Product grades A, B and C
BS 3A 116-1962 Specification for steel pan head bolts Unified threads for aircraft
BS A 266-1977 Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/in2 1100 MPa with Hi-torque speed drive recesses
BS 4604-2-1970 Specification for the use of high strength friction grip bolts in structural steelwork – Metric series – Higher grade parallel shank
BS EN 14399-6-2005 High-strength structural bolting assemblies for preloading – Plain chamfered washers
BS ISO 15072-2000 Hexagon bolts with flange with metric fine pitch thread – Small series – Product grade A
BS M 85-1995 Air cargo equipment – Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22 250 N 5 000 lbf or above
BS EN 4501-2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1100 MPa at ambient temperature / 315 °C
BS EN 3912-2007 Aerospace series – Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 FE-PA92HT, A286, silver plated – Classification: 1100 MPa at ambient temperature / 650 °C
BS EN 2936-1996 Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT Waspaloy, silver plated – Classification: 1210 MPa at ambient temperature/730 °C
BS S 158-1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS 10-1962 Specification for flanges and bolting for pipes, valves, and fittings
BS EN 24015-1992 Hexagon head bolts – Product grade B. Reduced shank shank diameter pitch diameter
BS EN ISO 3506-1-1998 Mechanical properties of corrosion-resistant stainless-steel fasteners – Bolts, screws and studs
BS 4A 104-2002 Specification for corrosion-resisting steel bolts Unified hexagons and Unified threads for aircraft
BS 2A 296-1995 Bolts and screws, metric – Tolerances of form and position
BS 7861-2-1997 Strata reinforcement support system components used in coal mines – Specification for birdcaged cablebolting
BS A 254, A 255, A 256, A 257, A 258, A 259-1976 Specification – Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 1100 MPa
BS EN 2870-1996 Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification: 1100 MPa at ambient temperature /315 °C
BS EN 4176-2005 Aerospace series – Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating – Collars in titanium TI-P99002 or aluminium alloy 2024 – Metric series – Technical specification
BS 64-1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
BS EN 4352-2004 Aerospace series – Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 Inconel 718, MoS2 coated – Classification – 1 550 MPa at ambient temperature / 425 °C
BS EN 14399-4-2005 High-strength structural bolting assemblies for preloading – System HV – Hexagon bolt and nut assemblies
BS EN 13411-5-2003 Terminations for steel wire ropes – Safety – U-bolt wire rope grips
STANDARDSDESCRIPTION
BS ISO 4161-1999 Hexagon nuts with flange – Coarse thread
BS 6101-6-1990 Machine tool ball screws – Specification for ball nuts and principal dimensions of ball screws
BS ISO 10103-2001 Assembly tools for screws and nuts – Double-headed, flat and offset, box wrenches – Length of wrenches and thickness of the heads
BS ISO 7041-2002 Prevailing torque type hexagon nuts with non-metallic insert, style 2. Property classes 9 and 12
BS EN 3721-1995 Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT A 286, MoS2 coated – Classification: 1100 MPa at ambient temperature/425 °C
BS HR 650-1972 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3 limiting ruling section 20 mm
BS EN 3005-2005 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 Waspaloy, silver plated or uncoated – Classification: 1210 MPa at ambient temperature / 730 °C – Technical specification
BS EN ISO 10485-2004 Cone proof load test on nuts
BS 2A 29-1962 Specification for aluminium alloy hexagonal nuts B.A and B.S.F. threads ordinary and slotted for aircraft
BS EN 4011-2005 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 Inconel 718, silver plated – Classification: 1550 MPa at ambient temperature/600 °C
BS A 233-236-1971 Specification for plain hexagonal thin nut of Class 3B UNJ thread
BS A 275, A 276, A 277, A 278, A 279, A 280-1981 Specification for hexagon self-locking nuts with non-metallic locking inserts – Metric series
BS EN 20898-2-1994 Mechanical properties of fasteners – Nuts with specified proof load values – Coarse thread
BS EN ISO 4035-2001 Hexagon thin nuts chamfered – Product grades A and B
BS EN 4048-2004 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 Inconel 718, MoS2 coated – Classification – 1 550 MPa at ambient temperature / 425 °C – Technical specification
BS EN 3064-1996 Shank nuts, self-locking, serrated – Installation procedure
BS 4790-1987 Method for determination of the effects of a small source of ignition on textile floor coverings hot metal nut method
BS EN 3720-1995 Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT A286, MoS2 coated – Classification: 1100 MPa at ambient temperature/425 °C
BS EN 3726-2005 Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA2601 A286, MoS2 coated – Classification: 1100 MPa at ambient temperature/425 °C
BS 6416-1983 Nomenclature for assembly tools for screws and nuts
BS 4929-1-1973 Specification for steel hexagon prevailing-torque type nuts – Metric series
BS 2485-1987 Specification for tee slots, tee bolts, tee nuts and tenons
BS A 281, A 282 […]-1981 Specification for hexagon thin self-locking nuts with non-metallic locking inserts – Metric series
BS EN 14399-4-2005 High-strength structural bolting assemblies for preloading – System HV – Hexagon bolt and nut assemblies
BS 3A 107-1962 Specification for aluminium alloy nuts Unified hexagons and Unified threads ordinary and slotted for aircraft
BS EN 2680-2006 Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated – Classification: 900 MPa at ambient temperature / 235 °C
BS 1127-1-1990 Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks
BS A 339-1999 Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS A 317-1997 Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications – 600 MPa at ambient temperature/120 °C, 600 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/425 °C, 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C, 1100 MPa at ambient temperature/650 °C, 1210 MPa at ambient temperature/730 °C, 1250 MPa at ambient temperature/235 °C and 1550 MPa at ambient temperature/600 °C – Dimensions
BS EN 3372-009-2007 Aerospace series – Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous – Receptacle, jam nut mounting – Product standard
BS 2A 210-1962 Specification for brass nuts Unified hexagons and Unified threads for aircraft
BS ISO 2351-3-2002 Assembly tools for screws and nuts – Machine-operated screwdriver bits – Screwdriver bits for hexagon socket screws
BS EN 1666-1998 Prevailing torque type hexagon nuts with flange with non-metallic insert with metric fine pitch thread
BS EN 2264-1996 Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS2 lubricated – Classification: 900 MPa at ambient temperature /235 °C
BS 4190-2001 ISO metric black hexagon bolts, screws and nuts – Specification
BS 4929-2-1973 Specification for steel hexagon prevailing-torque type nuts – Unified inch series
BS EN 4117-2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 Inconel 718, silver plated on thread – Classification – 1 550 MPa at ambient temperature / 600 °C
BS EN 1663-1998 Prevailing torque type hexagon nuts with flange with non-metallic insert
BS EN ISO 10511-1998 Prevailing torque type hexagon thin nuts with non-metallic insert
BS A 360-2000 Retainers, spring, sheet metal, for self-locking barrel nuts – Dimensions
BS 64-1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
BS 1127-4-1990 Screwing dies and dienuts – Terminology for circular screwing dies
BS EN 2997-006-2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak – Part 006: Hermetic jam-nut mounted receptacle – Product standard
BS EN 4116-2004 Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 A286, silver plated on thread – Classification – 1 100 MPa at ambient temperature / 425 °C
BS 6040-1981 Nomenclature for bolts, screws, nuts and accessories
BS EN 3266-2001 Aerospace series – Pipe coupling in titanium alloy – Bulkhead nut
BS EN ISO 10484-1997 Widening test on nuts
BS EN 3149-1997 Shank nuts – Installation holes, 60 ° swage, flanges – Design standard
BS 2S 112-1964 Specification for aircraft material – Semi-free cutting carbon steel, bright bars for machining 40-50 tonf/sq in: maximum size 1/2 inch diameter or minor sectional dimension primarily intended for the manufacture of nuts
BS 2A 295-2000 Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C – Test methods
BS 1127-5-1990 Screwing dies and dienuts – Specification for dimensions of hexagon dienuts
BS EN 3004-1997 Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 A286 – Classification: 1100 MPa at ambient temperature/650 °C – Technical specification
BS 2A 204, 2A 206, 2A 208 and A 217 to A 225-1963 Specifications for machine screws and nuts Unified threads below <1/4> inch for aeronautical purposes
BS 7644-2-1993 Direct tension indicators – Specification for nut face and bolt face washers
BS A 329-1999 Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS EN 4124-2004 Aerospace series – Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 Waspaloy, silver plated on thread, for 60 ° swage – Classification – 1 210 MPa at ambient temperature / 730 °C
BS 2827-1957 Specification for machine screw nuts, pressed type B.A. and Whitworth form threads
BS 3A 105-1962 Specification for corrosion-resisting steel nuts Unified hexagons and Unified threads ordinary, thin, slotted and castle for aircraft
BS A 316-1997 Nuts, hexagonal, slotted castellated, normal height, normal across flats, with MJ threads, classifications – 600 MPa at ambient temperature/120 °C, 600 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/425 °C, 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C, 1100 MPa at ambient temperature/650 °C, 1210 MPa at ambient temperature/730 °C, 1250 MPa at ambient temperature/235 °C and 1550 MPa at ambient temperature/600 °C – Di”
BS EN ISO 8675-2001 Hexagon thin nuts chamfered with metric fine pitch thread – Product grades A and B
BS EN 3752-2005 Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 A286, MoS2 coated – Classification: 1100 MPa at ambient temperature / 425 °C – Technical specification
BS 1127-3-1990 Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series
BS A 318-1997 Nuts, hexagonal, slotted castellated, reduced height, reduced across flats, with MJ threads, classifications – 450 MPa at ambient temperature/425 °C, 600 MPa at ambient temperature/235 °C, 600 MPa at ambient temperature/315 °C, 600 MPa at ambient temperature/650 °C, 900 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/730 °C and 1100 MPa at ambient temperature/600 °C – Dimensions
BS EN 3299-2007 Aerospace series – Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 A286, silver plated – Technical specification
BS 2S 113-1964 Specification for aircraft material – ’40’ carbon steel bright bars for machining 45-55 tonf/sq in: limiting ruling section 1 inch primarily intended for the manufacture of nuts
BS A 345-1999 Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C, 1100 MPa at ambient temperature/425 °C – Dimensions
BS EN ISO 4032-2001 Hexagon nuts, style 1. Product grades A and B
BS EN 3264-2001 Aerospace series – Pipe coupling 8 °30′ in titanium alloy – Thrust wire nut
BS EN 2907-1996 Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT A286, silver plated – Classification: 1 100 MPa at ambient temperature/650 °C
BS 2A 293-2005 Procurement of self-locking nuts with non-metallic locking elements – Metric series – Specification
BS ISO 1173-2001 Assembly tools for screws and nuts – Drive ends for hand and machine-operated screwdriver bits and connecting parts – Dimensions, torque testing
BS EN 2754-2006 Nuts, anchor, self locking, two lug, floating with counterbore – Classification: 1100 MPa/235 °C
BS ISO 7738-2001 Assembly tools for screws and nuts – Combination wrenches – Lengths of wrenches and maximum thickness of heads
BS EN 3080-2006 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced, branch with thrust wire nut
BS EN 2909-1995 Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT A 286, silver plated – Classification: 1100 MPa at ambient temperature/650 °C
BS EN 3536-2006 Aerospace series – Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated – Classification: 1100 MPa at ambient temperature/315 °C
BS EN 4028-2001 Aerospace series – Pipe coupling 8 °30′ in titanium alloy – Tees with thrust wire nut on run
BS EN 3152-2005 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 A286, silver plated or uncoated – Classification: 1100 MPa at ambient temperature/425 °C – Technical specification
BS EN 14218-2003 Hexagon nuts with flange – Fine pitch thread
BS AU 50-2.3-1994 Tyres and wheels – Wheels and rims – Specification for road-wheel nuts, studs and bolts for commercial vehicles
BS A 327-1998 Nuts, bihexagonal, self-locking, with counterbore and MJ threads , classifications: 1100 MPa at ambient temperature/425 °C, 1100 MPa at ambient temperature/650 °C, 1210 MPa at ambient temperature/425 °C, 1210 MPa at ambient temperature/730 °C, 1550 MPa at ambient temperature/235 °C, 1550 MPa at ambient temperature/425 °C and 1550 MPa at ambient temperature/600 °C – Dimensions
BS EN 2810-2001 Aerospace series – Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated – Classification: 900 MPa at ambient temperature/650 °C
BS EN 4069-1996 Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated – Classification: 600MPa at ambient temperature/650 °C
BS EN 3645-010-2006 Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 010: Receptacle, hermetic, round flange, jam nut mounting — Product standard
BS EN 3377-1996 Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT A286 – Classification: 1100 MPa at ambient temperature/425 °C
BS 4185-9-1976 Specification – Machine tool components – Levelling screws, nuts and seating plates
BS 2A 302-2000 Nuts, self-locking, with maximum operating temperatures less than or equal to 425 °C – Procurement specification
BS A 320-1997 Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/315 °C, 900 MPa at ambient temperature/425 °C – Dimensions
BS A 338-1999 Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS A 250-1974 Specification for slotted hexagonal shear nuts of Class 3B UNJ thread
BS A 281, A 282, A 283, A 284, A 285, A 286-1981 Specification for hexagon thin self-locking nuts with non-metallic locking inserts – Metric series
BS EN 2906-1994 Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT A286 – Classification: 1100 MPa at ambient temperature/650 °C
BS EN 3012-1996 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT Waspaloy – Classification: 1210 MPa at ambient temperature/730 °C
BS EN 3646-006-2006 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating temperature 175 ? or 200 ? continuous – Part 006: Receptacle, hermetic jam-nut mounting – Product standard
BS 3A 103-1962 Specification for steel nuts Unified hexagons and Unified threads ordinary, thin, slotted and castle for aircraft
BS EN ISO 4034-2001 Hexagon nuts – Product grade C
BS EN 4020-2001 Aerospace series – Pipe coupling 8 °30′ in titanium alloy – Elbows 90 °, welded end with thrust wire nut
BS ISO 262-1999 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
BS A 343-1999 Nuts, plain or slotted castellated – Test methods
BS 3A 125 to 3A 132-1981 Specification for stiffnuts Unified threads for aircraft
BS 3A 125 to 3A 132, 3A 136 to 3A 143, 3A 147 to 3A 168, 3A 180, 3A 181, 3A 186, 3A 187, 3A 192, 3A Specification for stiffnuts Unified threads for aircraft
BS EN 14399-3-2005 High-strength structural bolting for preloading – System HR – Hexagon bolt and nut assemblies
BS 3692-2001 ISO metric precision hexagon bolts, screws and nuts – Specification
BS EN ISO 898-6-1996 Mechanical properties of fasteners – Nuts with specified proof load values – Fine pitch thread
BS EN 3013-1996 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT Waspaloy, silver plated – Classification: 1210 MPa at ambient temperature/730 °C
BS 7786-2006 Specification for unsintered PTFE tapes for general use
BS 2A 122, 2A 123, 2A 124-1981 Specification for clinch nuts Unified threads for aircraft
BS 1981-1991 Specification for unified machine screws and machine screw nuts
BS EN 3065-1996 Installation holes for self-locking, serrated shank nuts – Design standard
BS 2A 110-1962 Specification for steel nuts Unified hexagons and Unified threads for shear bolts for aircraft
BS 2A 27-1962 Specification for steel hexagonal nuts B.A. and B.S.F threads ordinary, thin, slotted and castle for aircraft
BS EN 4119-2004 Aerospace series – Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 A286, silver plated on thread – Classification – 1 100 MPa at ambient temperature / 650 °C
BS ISO 2982-2-2001 Rolling bearings – Accessories – Locknuts and locking devices – Dimensions
BS 4185-1-1967 Machine tool components – Locknuts ‘C’ type, socket set screw locking
BS A 342-1999 Nuts, plain or slotted castellated – Procurement specification
BS A 334-1999 Nuts, anchor, self-locking, fixed, 90 ° corner, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS A 242-1974 Specification for hexagonal castle nuts of Class 3B UNJ thread
BS EN 4121-2004 Aerospace series – Shank nuts, serrated, self-locking, in heat resisting steel FE- A2601 A286, silver plated on thread – Classification: 1100 MPa at ambient temperature /650 °C
BS 2S 147-1976 Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS 2A 204-1963 Specifications for machine screws and nuts Unified threads below 1/4 inch for aeronautical purposes
BS ISO 8788-2000 Aerospace – Nuts, metric – Tolerances of form and position
BS ISO 10484-1997 Widening test on nuts
BS EN ISO 4033-2001 Hexagon nuts, style 2. Product grades A and B
BS ISO 10914-1998 Assembly tools for screws and nuts – Sockets and wrenches for spline drive
BS ISO 10102-2001 Assembly tools for screws and nuts – Double-headed open-ended engineers’ wrenches – Length of wrenches and thickness of the heads
BS 7670-1-1993 Steel nuts and bolts for resistance projection welding – Specification for dimensions and properties
BS EN 4012-2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 Inconel 718, MoS2 coated – Classification – 1 550 MPa at ambient temperature / 425 °C
BS EN 3015-2001 Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 A286, silver plated – Classification: 1100 MPa at ambient temperature/650 °C
BS A 333-1999 Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS A 242, A 243, A 244, A 245-1974 Specification for hexagonal castle nuts of Class 3B UNJ thread
BS A 237-240-1971 Specification for plain hexagonal nut of Class 3B UNJ thread
BS A 275, A 276 […]-1981 Specification for hexagon self-locking nuts with non-metallic locking inserts – Metric series
BS A 314-1997 Aerospace – Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa at ambient temperature/120 °C, 450 MPa at ambient temperature/235 °C, 600 MPa at ambient temperature/425 °C, 900 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/315 °C, 900 MPa at ambient temperature/650 °C, 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/730 °C and 1250 MPa at ambient temperature/600 °C – Dimension”
BS 4A 100-2003 Aerospace series – Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
BS EN ISO 6789-2003 Assembly tools for screws and nuts – Hand torque tools – Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
BS EN ISO 7719-1998 Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10
BS 1768-1963 Specification for Unified precision hexagon bolts, screws, & nuts UNC & UNF threads – Normal series
BS EN 4018-2001 Aerospace series – Pipe coupling 8 °30′ in titanium alloy – Elbows 90 ° with thrust wire nut
BS EN ISO 4759-1-2001 Tolerances for fasteners – Bolts, screws, studs and nuts – Product grades A, B and C
BS EN 2997-004-2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak – Part 004: Jam-nut mounted receptacle – Product standard
BS EN 3741-2005 Aerospace series – Nuts, clip, metric – Installation holes and assembly
BS EN 2882-2006 Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated – Classification: 1100 MPa at ambient temperature / 235?
BS EN 3723-1996 Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT A286, MoS2 coated – Classification: 1100 MPa at ambient temperature/425 °C
BS A 330-1999 Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/315 °C and 900 MPa at ambient temperature/425 °C – Dimensions
BS A 344-1999 Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperatures/235 °C, 1100 MPa at ambient temperature/315 °C, 1100 MPa at ambient temperature/425 °C – Dimensions
BS EN 4031-2001 Aerospace series – Pipe coupling 8 °30′ in titanium alloy – Nut for welded union
BS A 324-1998 Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa at ambient temperature/425 °C, 1100 MPa at ambient temperature/650 °C, 1210 MPa at ambient temperature/425 °C, 1210 MPa at ambient temperature/730 °C, 1550 MPa at ambient temperature/235 °C, 1550 MPa at ambient temperature/425 °C and 1550 MPa at ambient temperature/600 °C – Dimensions
BS EN 4123-2004 Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 Inconel 718, silver plated on thread – Classification – 1 550 MPa at ambient temperature / 600 °C
BS A 315-1997 Aerospace – Nuts, hexagonal, slotted castellated, reduced height, normal across flats, with MJ threads, classifications: 450 MPa at ambient temperature/120 °C, 450 MPa at ambient temperature/235 °C, 600 MPa at ambient temperature/425 °C, 900 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/315 °C, 900 MPa at ambient temperature/650 °C, 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/730 °C and 1250 MPa at ambient temperature/60″
BS A 335-1999 Nuts, anchor, self-locking, fixed, closed corner, reduced series , with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS EN 3239-1996 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT Waspaloy, silver plated thread – Classification: 1210 MPa at ambient temperature/730 °C
BS EN 2809-2001 Aerospace series – Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated – Classification – 900 MPa at ambient temperature/650 °C
BS A 336-1999 Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS EN ISO 2320-1998 Prevailing torque type steel hexagon nuts – Mechanical and performance requirements
BS EN 4118-2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 A286, silver plated on thread – Classification – 1 100 MPa at ambient temperature / 650 °C
BS EN ISO 10512-1998 Prevailing torque type hexagon nuts with non-metallic insert, style 1, with metric fine pitch thread – Property classes 6, 8 and 10
BS EN ISO 8674-2001 Hexagon nuts, style 2, with metric fine pitch thread – Product grades A and B
BS EN 3196-1994 Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT A286, silver plated – Classification: 1100 MPa at ambient temperature/425 °C
BS EN ISO 10513-1998 Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread – Property classes 8, 10 and 12
BS 450-1958 Specification for machine screws and machine screw nuts B.S.W. & B.S.F. threads
BS EN 1661-1998 Hexagon nuts with flange
BS EN 4610-2005 Pipe coupling 8°30′ in titanium alloy — Elbows 45°, with thrust wire nut
BS EN 2752-1990 Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore – Classification: 1100 MPa/235 °C
BS EN 2911-1995 Shank nuts, self-locking, in heat resisting steel FE-PA92HT A 286, silver plated – Classification: 1100 MPa at ambient temperature/650 °C
BS A 359-2000 Nuts, barrel, self-locking, floating, with MJ threads, classifications – 900 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/235 °C, 1250 MPa at ambient temperature/235 °C, 1550 MPa at ambient temperature/235 °C – Dimensions
BS ISO 10104-2001 Assembly tools for screws and nuts – Double-headed, deep offset and modified offset, box wrenches – Length of wrenches and thickness of the heads
BS EN 1664-1998 Prevailing torque type all-metal hexagon nuts with flange
BS EN 4027-2001 Aerospace series – Pipe coupling 8 °30′ in titanium alloy – Tees branch with thrust wire nut
BS EN 3645-009-2006 Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 009: Receptacle, round flange, jam nut mounting — Product standard
BS EN 2908-1994 Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT A286 – Classification: 1100 MPa at ambient temperature/650 °C
BS EN 2753-1996 Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated – Classification – 1100 MPa at ambient temperature / 235 °C
BS EN ISO 4759-3-2000 Tolerances for fasteners – Plain washers for bolts, screws and nuts – Product grades A and C
BS EN ISO 7040-1998 Prevailing torque type hexagon nuts with non-metallic insert, style 1. Property classes 5, 8 and 10
BS EN 3660-003-2006 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 003: Grommet nut, style A for EN 2997 and EN 4067: Product standard
BS EN ISO 8673-2001 Hexagon nuts, style 1, with metric fine pitch thread – Product grades A and B
BS A 246-1974 Specification for slotted hexagonal thick nuts of Class 3B UNJ thread
BS EN 4047-2004 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 Inconel 718, silver plated – Classification: 1550MPa at ambient temperature/600 °C – Technical specification
BS ISO 6787-2001 Assembly tools for screws and nuts – Adjustable wrenches
BS EN 4120-2004 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 Waspaloy, silver plated on thread – Classification – 1 210 MPa at ambient temperature / 730 °C
BS EN 3014-2001 Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 A286 – Classification: 1100 MPa at ambient temperature/650 °C
BS 4933-1973 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
BS A 353-2000 Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated – Dimensions
BS EN 2910-1994 Shank nuts, self-locking, in heat resisting steel FE-PA92HT A286 – Classification: 1100 MPa at ambient temperature/650 °C
BS EN ISO 4036-2001 Hexagon thin nuts unchamfered – Product grade B
BS 2A 58-1962 Specification for steel hexagonal nuts B.S.F. threads for shear bolts for aircraft
BS A 246, A 247, A 248, A 249-1974 Specification for slotted hexagonal thick nuts of Class 3B UNJ thread
BS A 31-54-1951 Specification for British Association B.A. low tensile screws and nuts for aeronautical purposes
BS ISO 1085-2000 Assembly tools for screws and nuts – Double-ended wrenches – Size pairing
BS EN ISO 7042-1998 Prevailing torque type all-metal hexagon nuts – Property classes 5, 8, 10 and 12
BS A 281-1981 Specification for hexagon thin self-locking nuts with non-metallic locking inserts – Metric series
BS EN 3722-1995 Shank nuts, self-locking, in heat resisting steel FE-PA92HT A 286, MoS2 coated – Classification: 1100 MPa at ambient temperature/425 °C
BS ISO 2725-3-2001 Assembly tools for screws and nuts – Square drive sockets – Machine-operated sockets “non-impact” – Dimensions
BS EN 28839-1992 Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals
BS EN ISO 21670-2003 Hexagon weld nuts with flange
BS EN ISO 887-2000 Plain washers for metric bolts, screws and nuts for general purposes – General plan
BS A 337-1999 Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS 7764-1994 Specification for hexagon slotted nuts and castle nuts
BS 6356-13-1997 Spraying equipment for crop protection – Air-assisted sprayers – Dimensions of nozzle swivel nuts
BS A 298-1988 Methods of test for self-locking nuts with maximum operating temperature greater than 425 °C
BS EN 3646-004-2006 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating temperature 175 ? or 200 ? continuous – Part 004: Receptacle, jam-nut mounting – Product standard
BS EN 4024-2001 Aerospace series – Pipe coupling 8 °30′ in titanium alloy – Elbows 45 ° welded end with thrust wire nut
BS EN 20225-1992 Fasteners – Bolts, screws, studs and nuts – Symbols and designations of dimensions
BS EN 1667-1998 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
BS EN ISO 8662-7-1997 Hand-held portable power tools – Measurement of vibrations at the handle – Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
BS 1127-2-1990 Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series
BS S 158-1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS EN 4013-2005 Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 Inconel 718, silver plated – Classification: 1550 MPa at ambient temperature / 600 °C
BS EN ISO 3506-2-1998 Mechanical properties of corrosion-resistant stainless-steel fasteners – Nuts
BS 7670-2-1997 Steel nuts and bolts for resistance projection welding – Specification for welding of weld nuts and weld bolts
BS A 340-1999 Nuts, anchor, self-locking, fixed, 90 ° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa at ambient temperature/235 °C, 1100 MPa at ambient temperature/315 °C and 1100 MPa at ambient temperature/425 °C – Dimensions
BS EN 2881-2006 Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated – Classification: 900 MPa at ambient temperature / 120 °C
BS A 321-1997 Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/315 °C and 900 MPa at ambient temperature/425 °C – Dimensions
BS EN 4590-2005 Aerospace series – Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
BS EN 3230-2001 Aerospace series – Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated – Classificaiton: 900 MPa at ambient temperature/235 °C
BS EN ISO 6157-2-2004 Fasteners – Surface discontinuities – Nuts
BS 4183-1967 Specification for machine screws and machine screw nuts – Metric series
BS 2A 122-1981 Specification for clinch nuts Unified threads for aircraft
BS EN 3856-2002 Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 – Swivel nuts for thrust wire
BS 2A 204, 2A 206 […]-1963 Specifications for machine screws and nuts Unified threads below <1/4> inch for aeronautical purposes
BS 2S 149-1976 Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS A 319-1997 Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa at ambient temperature/425 °C, 600 MPa at ambient temperature/235 °C, 600 MPa at ambient temperature/315 °C, 600 MPa at ambient temperature/650 °C, 900 MPa at ambient temperature/235 °C, 900 MPa at ambient temperature/730 °C and 1100 MPa at ambient temperature/600 °C – Dimensions
BS 2L 87-1971 Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy solution treated and precipitation treated free from peripheral and asymmetric coarse grain not less than 14 mm nor more than 36 mm across flats Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8
BS A 275-1981 Specification for hexagon self-locking nuts with non-metallic locking inserts – Metric series
BS 1083-1965 Specification for precision hexagon bolts, screws and nuts B.S.W. & B.S.F. threads
BS ISO 7720-1998 Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
BS 856-1969 Specification for wing nuts
BS ISO 2351-2-2002 Assembly tools for screws and nuts – Machine-operated screwdriver bits – Screwdriver bits for cross-recessed head screws
BS EN 4591-2005 Aerospace series – Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated – Classification: 15 50 MPa at ambient temperature / 315 °C
BS A 250, A 251, A 252, A 253-1974 Specification for slotted hexagonal shear nuts of Class 3B UNJ thread
BS ISO 10897-1998 Collets for tool holders with taper ratio 1:10 – Collets, holders , nuts
BS A 358-2-2000 MJ threads – Limit dimensions for bolts and nuts
BS 2A 24-1962 Specification for corrosion-resisting steel hexagonal nuts B.A and B.S.F. threads ordinary, thin, slotted and castle for aircraft
BS EN 4122-2004 Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA2601 A286, silver plated on thread – Classification – 1 100 MPa at ambient temperature/650 °C
BS ISO 2351-1-2007 Assembly tools for screws and nuts – Machine-operated screwdriver bits – Screwdriver bits for slotted head screws
BS ISO 10663-1999 Hexagon nuts with flange – Fine pitch thread
BS ISO 8992-2005 Fasteners – General requirements for bolts, screws, studs and nuts
STANDARDSDESCRIPTION
BS EN 175301-803-2006 Detail specification: rectangular connectors – Flat contacts, 0,8 mm thickness, locking screw not detachable
BS EN 3759-1997 Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa at ambient temperature/425 °C
BS EN 20898-7-1995 Mechanical properties of fasteners – Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS EN ISO 6789-2003 Assembly tools for screws and nuts – Hand torque tools – Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
BS 2A 204, 2A 206, 2A 208 and A 217 to A 225-1963 Specifications for machine screws and nuts Unified threads below <1/4> inch for aeronautical purposes
BS EN 4496-2005 Aerospace series – Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1 100 MPa at ambient temperature / 315 °C
BS EN ISO 898-5-1999 Mechanical properties of fasteners made of carbon steel and alloy steel – Set screws and similar threaded fasteners not under tensile stresses
BS EN 3305-1997 Screws, 100 ° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa at ambient temperature/235 °C
BS QC 222000-1996 Radio-frequency connectors – RF coaxial connectors with inner diameter of outer conductor 6,5 mm 0,256 in with screw coupling – Characteristic impedance 50 ohms – Type TNC
BS EN 4509-2006 Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1 100 MPa at ambient temperature/315 °C
BS 3531-23.2-1993 Implants for osteosynthesis – Bone plates – Specification for holes and slots for use with screws of 4,5 mm, 4,2 mm, 4,0 mm, 3,9 mm, 3,5 mm and 2,9 mm nominal sizes
BS EN 3202-1995 Holes and traps for T-head bolts – Design standard
BS ISO 2351-3-2002 Assembly tools for screws and nuts – Machine-operated screwdriver bits – Screwdriver bits for hexagon socket screws
BS EN ISO 7085-1999 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
BS EN ISO 15481-1999 Cross recessed pan head drilling screws with tapping screw thread
BS 7814-1995 Specification for bolts and screws incorporating either underhead locking or anti-rotation features
BS EN ISO 4017-2001 Hexagon head screws – Product grades A and B
BS EN ISO 4027-2003 Hexagon socket set screws with cone point
BS 1127-2-1990 Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series
BS A 31-54-1951 Specification for British Association B.A. low tensile screws and nuts for aeronautical purposes
BS EN ISO 1479-1995 Specification for hexagon-head tapping screws
BS 7433-1-1991 Cross recessed machine screws – Specification for pan head screws of product grade A
BS EN 3303-1997 Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1100 MPa at ambient temperature/235 °C
BS EN 3760-1997 Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa at ambient temperature/425 °C
BS EN ISO 10664-2005 Hexalobular internal driving feature for bolts and screws
BS EN ISO 15065-2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
BS A 287, A 288 […]-1982 Specification for hexagon socket head cap screws – Metric series
BS EN ISO 4759-3-2000 Tolerances for fasteners – Plain washers for bolts, screws and nuts – Product grades A and C
BS EN ISO 7049-1995 Cross recessed pan head tapping screws
BS 6528-1984 Glossary of terms for cylindrical screw threads
BS 4174-1972 Specification for self-tapping screws and metallic drive screws
BS ISO 1085-2000 Assembly tools for screws and nuts – Double-ended wrenches – Size pairing
BS EN ISO 14587-2001 Hexalobular socket raised countersunk oval head tapping screws
BS 7433-3-1991 Cross recessed machine screws – Specification for raised countersunk head screws product grade A
BS 6040-1981 Nomenclature for bolts, screws, nuts and accessories
BS ISO 885-2000 General purpose bolts and screws – Metric series – Radii under the head
BS 1210-1963 Specification for wood screws
BS EN 2363-1989 Specification for locking clips for turnbuckles of control cables – Dimensions
BS EN ISO 3506-4-2003 Mechanical properties of corrosion-resistant stainless-steel fasteners – Tapping screws
BS EN ISO 14585-2001 Hexalobular socket pan head tapping screws
BS A 313-1997 Areospace – Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS EN ISO 11381-1995 Optics and optical instruments – Ophthalmic optics – Screw threads
BS EN ISO 10673-1999 Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A
BS EN 3306-1996 Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated – Classification – 1100 MPa at ambient temperature/315 °C
BS EN ISO 1580-1994 Slotted pan head screws – Product grade A
BS EN 20273-1992 Fasteners – Clearance holes for bolts and screws
BS ISO 2725-3-2001 Assembly tools for screws and nuts – Square drive sockets – Machine-operated sockets “non-impact” – Dimensions
BS EN 3381-1997 Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated – Classification: 1100 MPa at ambient temperature /315 °C
BS DD IEC/PAS 61169-4-2006 Radio-frequency connectors – Sectional specification – Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm 0,63 in with screw lock – Characteristic impedance 50 $2I type 7-16
BS 1473-1972 Specification for wrought aluminium and aluminium alloys for general engineering purposes – rivet, bolt and screw stock
BS 768-1958 Specification for slotted grub screws
BS 7715-1994 Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
BS EN ISO 2009-1995 Slotted countersunk flat head screws common head style – Product grade A
BS EN ISO 7051-1995 Specification for cross-recessed raised countersunk oval head tapping screws
BS 2A 204-1963 Specifications for machine screws and nuts Unified threads below 1/4 inch for aeronautical purposes
BS 3531-5.4-1993 Implants for osteosynthesis – Bone screws and auxiliary equipment – Specification for screws having symmetrical and asymmetrical thread and conical undersurfaces
BS EN ISO 15483-1999 Cross recessed raised countersunk head drilling screws with tapping screw thread
BS 6487-1984 Specification for split pin holes and wire holes in bolts, screws and studs
BS ISO 6787-2001 Assembly tools for screws and nuts – Adjustable wrenches
BS EN 27435-1992 Slotted set screws with long dog point
BS ISO 2351-2-2002 Assembly tools for screws and nuts – Machine-operated screwdriver bits – Screwdriver bits for cross-recessed head screws
BS EN 2937-1994 Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT A286 classification: 900 MPa at ambient temperature/650 °C
BS EN ISO 7050-1995 Specification for cross-recessed countersunk flat head tapping screws common head style
BS EN ISO 7721-2-1995 Countersunk flat head screws – Penetration depth of cross recesses
BS 4183-1967 Specification for machine screws and machine screw nuts – Metric series
BS A 287, A 288, A 289, A 290, A 291, A 292-1982 Specification for hexagon socket head cap screws – Metric series
BS EN ISO 14584-2001 Hexalobular socket raised countersunk head screws
BS EN 4307-2005 Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, 0,50 mm wall thickness
BS EN 4323-2004 Aerospace series – Screws, 100 ° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated – Classification – 900 MPa at ambient temperature / 350 °C
BS ISO 10103-2001 Assembly tools for screws and nuts – Double-headed, flat and offset, box wrenches – Length of wrenches and thickness of the heads
BS 4190-2001 ISO metric black hexagon bolts, screws and nuts – Specification
BS 3692-2001 ISO metric precision hexagon bolts, screws and nuts – Specification
BS 2A 296-1995 Bolts and screws, metric – Tolerances of form and position
BS EN ISO 6410-1-1996 Technical drawings – Screw threads and threaded parts – General conventions
BS EN 3035-1997 Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa at ambient temperature/235 °C
BS EN 2650-1997 Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa at ambient temperature /425 °C
BS EN 3307-1997 Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated – Classification: 1100 MPa at ambient temperature/315 °C
BS ISO 5414-1-2002 Tool chucks end mill holders with clamp screws for flatted cylindrical shank tools – Dimensions of the driving system of tool shanks
BS EN 4303-2005 Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, 0,25 mm wall thickness
BS ISO 10045-1993 Alpine skis – Binding mounting area – Requirements for test screws
BS ISO 262-1999 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
BS EN 3725-2005 Aerospace series – Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated – Strength class: 1100 MPa at ambient temperature
BS EN 3038-1997 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa at ambient temperature/425 °C
BS 2470-1973 Specification for hexagon socket screws and wrench keys – Inch series
BS EN ISO 7045-1995 Pan head screws with type H or type Z cross recess – Product grade A
BS EN ISO 14586-2001 Hexalobular socket countersunk head tapping screws
BS EN 27721-1992 Countersunk head screws – Head configuration and gauging
BS EN 2884-1996 Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoS2 lubricated – Classification: 1100 MPa at ambient temperature/315 °C
BS 6416-1983 Nomenclature for assembly tools for screws and nuts
BS A 312-1997 Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS ISO 7738-2001 Assembly tools for screws and nuts – Combination wrenches – Lengths of wrenches and maximum thickness of heads
BS 3531-5.5-1990 Implants for osteosynthesis – Bone screws and auxiliary equipment – Specification for taps and drills
BS ISO 2351-1-2007 Assembly tools for screws and nuts – Machine-operated screwdriver bits – Screwdriver bits for slotted head screws
BS EN ISO 3506-1-1998 Mechanical properties of corrosion-resistant stainless-steel fasteners – Bolts, screws and studs
BS 4185-1-1967 Machine tool components – Locknuts ‘C’ type, socket set screw locking
BS EN ISO 4026-2003 Hexagon socket set screws with flat point
BS EN 2939-1994 Screws, 100 ° countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT A286 – Classification: 900 MPa at ambient temperature/650 °C
BS EN ISO 4028-2003 Hexagon socket set screws with dog point
BS HR 650-1972 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3 limiting ruling section 20 mm
BS EN ISO 4757-1995 Cross recesses for screws
BS EN 3037-1997 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification: 1100 MPa at ambient temperature/315 °C
BS 1981-1991 Specification for unified machine screws and machine screw nuts
BS 7842-1996 Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
BS EN 3543-1997 Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa at ambient temperature/425 °C
BS EN ISO 4759-1-2001 Tolerances for fasteners – Bolts, screws, studs and nuts – Product grades A, B and C
BS 3531-5.1-1997 Implants for osteosynthesis – Bone screws and auxiliary equipment – Specification for keys for use with screws having heads with hexagon socket
BS EN ISO 8676-2001 Hexagon head screws with metric fine pitch thread – Product grades A and B
BS EN ISO 14580-2001 Hexalobular socket cheese head screws
BS 1127-5-1990 Screwing dies and dienuts – Specification for dimensions of hexagon dienuts
BS EN ISO 10669-1999 Plain washers for tapping screw and washer assemblies – Normal and large series – Product grade A
BS EN ISO 1482-1995 Specification for slotted countersunk flat head tapping screws common head style
BS EN ISO 10510-2000 Tapping screw and washer assemblies with plain washers
BS ISO 10102-2001 Assembly tools for screws and nuts – Double-headed open-ended engineers’ wrenches – Length of wrenches and thickness of the heads
BS EN ISO 14579-2001 Hexalobular socket head cap screws
BS 7599-1992 Specification for hexagon washer head tapping screws
BS ISO 10104-2001 Assembly tools for screws and nuts – Double-headed, deep offset and modified offset, box wrenches – Length of wrenches and thickness of the heads
BS EN ISO 15480-1999 Hexagon washer head drilling screws with tapping screw thread
BS EN ISO 1481-1995 Specification for slotted pan-head tapping screws
BS 7504-1995 Hydraulic fluid power – Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa 250 bar and 400 bar
BS EN ISO 1483-1995 Slotted raised countersunk oval head tapping screws common head style
BS A 55 and 56-1951 Specifications for grub screws for aeronautical purposes
BS EN 27436-1992 Slotted set screws with cup point
BS EN 4304-2005 Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, 0,25 mm wall thickness
BS EN 2897-1996 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa at ambient temperature /235 °C
BS 3531-5.6-1991 Implants for osteosynthesis – Bone screws and auxiliary equipment – Specification for the mechanical requirements and test methods for screws having asymmetrical thread and spherical undersurface
BS EN 4306-2005 Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, 0,50 mm wall thickness
BS EN ISO 6410-3-1996 Technical drawings – Screw threads and threaded parts – Simplified representation
BS A 260, A 261, A 262, A 263, A 264, A 265-1976 Specification for metric screws
BS 7795-1995 Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
BS EN ISO 4762-2004 Hexagon socket head cap screws
BS 2559-1994 Specification for screwdrivers and screwdriver accessories
BS A 322-1998 Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS 4185-9-1976 Specification – Machine tool components – Levelling screws, nuts and seating plates
BS EN ISO 2342-2004 Slotted headless screws with shank
BS ISO 10228-1993 Cross-country skis – Binding mounting area – Requirements for test screws
BS 6605-1990 Specification for cross recesses for screws
BS 3531-5.2-1990 Implants for osteosynthesis – Bone screws and auxiliary equipment – Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess
BS EN 2649-1995 Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated – Classification – 900 MPa at ambient temperature/235 °C
BS EN 2653-1997 Screws, 100 ° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa at ambient temperature /425 °C
BS EN 2940-1996 Screws, 100 ° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT A 286, silver plated – Classification: 900MPa at ambient temperature/650 °C
BS EN 26157-1-1992 Fasteners – Surface discontinuities – Bolts, screws and studs for general requirements
BS EN ISO 7046-1-1994 Countersunk flat head screws common head style with type H or type Z cross recess – Product grade A. Countersunk flat head screws common head style with type H or type Z cross recess – Product grade A. Steel property class 4.8
BS EN 2885-1996 Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa at ambient temperature/235 °C
BS 3531-23.3-1991 Implants for osteosynthesis – Bone plates – Specification for holes corresponding to screws with asymmetrical thread and spherical undersurfaces
BS EN ISO 2702-1992 Heat-treated steel tapping screws – Mechanical properties
BS EN ISO 1207-1993 Slotted cheese head screws – Product grade A
BS EN ISO 10644-1998 Screw and washer assemblies with plain washers – Washer hardness classes 200 HV and 300 HV
BS A 260, A 261 […]-1976 Specification for metric screws
BS 7364-1990 Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
BS 7600-1992 Specification for hexagon flange head tapping screws
BS 2A 204, 2A 206 […]-1963 Specifications for machine screws and nuts Unified threads below <1/4> inch for aeronautical purposes
BS ISO 10914-1998 Assembly tools for screws and nuts – Sockets and wrenches for spline drive
BS 1127-1-1990 Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks
BS EN ISO 887-2000 Plain washers for metric bolts, screws and nuts for general purposes – General plan
BS EN 14512-2006 Tanks for the transport of dangerous goods – Tank equipment for the transport of liquid chemicals – Hinged manhole cover and neckrings with pivoting bolts
BS EN ISO 15482-1999 Cross recessed countersunk head drilling screws with tapping screw thread
BS 450-1958 Specification for machine screws and machine screw nuts B.S.W. & B.S.F. threads
BS ISO 8992-2005 Fasteners – General requirements for bolts, screws, studs and nuts
BS EN 2654-1997 Screws, 100 ° countersunk normal head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa at ambient temperature/80 °C
BS EN 320-1993 Fibreboards – Determination of resistance to axial withdrawal of screws
BS ISO 6162-1-2002 Hydraulic fluid power – Flange connectors with split or one-piece flange clamps and metric or inch screws – Flange connectors for use at pressures of 3,5 MPa 35 bar to 35 MPa 350 bar, DN 13 to DN 127
BS EN ISO 7380-2004 Hexagon socket button head screws
BS EN ISO 4029-2003 Hexagon socket set screws with cup point
BS 4933-1973 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
BS EN 2652-1997 Screws, 100 ° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa at ambient temperature/235 °C
BS EN 28839-1992 Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals
BS A 260-1976 Specification for metric screws
BS 7345-1990 Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts
BS EN ISO 2010-1995 Countersunk slotted raised head screws common head style – Product grade A
BS 7433-2-1991 Cross recessed machine screws – Specification for countersunk flat head screws product grade A and property class 4.8 only
BS EN 26157-3-1992 Fasteners – Surface discontinuities – Bolts, screws and studs for special requirements
BS 1768-1963 Specification for Unified precision hexagon bolts, screws, & nuts UNC & UNF threads – Normal series
BS EN ISO 4018-2001 Hexagon head screws – Product grade C
BS EN 2938-1996 Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT A 286, silver plated – Classification: 900 MPa at ambient temperature/650 °C
BS EN ISO 10666-1999 Drilling screws with tapping screw threads – Mechanical and functional properties
BS 1083-1965 Specification for precision hexagon bolts, screws and nuts B.S.W. & B.S.F. threads
BS 3531-5.3-1991 Implants for osteosynthesis – Bone screws and auxiliary equipment – Specification for the dimensions of screws having hexagonal drive connection, spherical under-surfaces and asymmetrical thread
BS 4168-7-1982 Hexagon socket screws and wrench keys: metric series – Specification for hexagon socket shoulder screws
BS G 203-1967 Specification for Unified screws with captive facing and locking washers
BS EN ISO 898-1-1999 Mechanical properties of fasteners made of carbon steel and alloy steel – Bolts, screws and studs
BS EN 27434-1992 Slotted set screws with cone point
BS EN 4497-2005 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1 100 MPa at ambient temperature / 315 °C
BS ISO 1173-2001 Assembly tools for screws and nuts – Drive ends for hand and machine-operated screwdriver bits and connecting parts – Dimensions, torque testing
BS 1127-3-1990 Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series
BS A 311-1997 Aerospace – Screws, 100 ° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa – Dimensions
BS 1127-4-1990 Screwing dies and dienuts – Terminology for circular screwing dies
BS EN ISO 3506-3-1998 Mechanical properties of corrosion-resistant stainless-steel fasteners – Set screws and similar fasteners not under tensile stress
BS A 287-1982 Specification for hexagon socket head cap screws – Metric series
BS 2559-3-1973 Specification for screwdrivers – Insulated screwdrivers
BS EN ISO 14583-2001 Hexalobular socket pan head screws
BS ISO 6162-2-2002 Hydraulic fluid power – Flange connectors with split or one-piece flange clamps and metric or inch screws – Flange connectors for use at pressures of 35 MPa 350 bar to 40 MPa 400 bar, DN 13 to DN 51
BS EN 24766-1992 Slotted set screws with flat point
BS EN 3304-1997 Screws, 100 ° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification: 1100 MPa at ambient temperature/315 °C
BS EN 2886-1996 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification – 900 MPa at ambient temperature/235 °C
BS EN 2651-1997 Screws, pan head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa at ambient temperature/80 °C
BS EN ISO 7048-1999 Cross recessed cheese head screws
BS ISO 5414-2-2002 Tool chucks end mill holders with clamp screws for flatted cylindrical shank tools – Connecting dimensions of chucks and designation
BS ISO 2351-3-2002 Assembly tools for screws and nuts – Machine-operated screwdriver bits – Screwdriver bits for hexagon socket screws
BS EN ISO 10642-2004 Hexagon socket countersunk head screws
BS EN ISO 7047-1995 Countersunk raised head screws common head style with type H or type Z cross recess – Product grade A
BS 4429-1987 Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications
BS EN ISO 7046-2-1995 Countersunk flat head screws common head style with type H or type Z cross recess – Product grade A. Steel of property class 8.8, stainless steel and non-ferrous metals
BS EN 3308-1996 Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS2 lubricated – Classification – 1100 MPa at ambient temperature /315 °C
STANDARDSDESCRIPTION
BS 2S 205-2004 Austenitic chromium-nickel steel wire rod, wire and springs – Specification
BS 6225-1-1982 Method for determining the resistance to picking of paper and board: accelerating speed method using the IGT tester – Pendulum or spring model
BS SP 166-1982 Specification for spring retaining rings for aerospace application: carbon steel circlips metric series
BS 2HR 501-1973 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5
BS 1726-2-2002 Cylindrical helical springs made from round wire and bar – Guide to methods of specifying, tolerances and testing – Extension springs
BS 8726-2-2002 Cylindrical helical springs made from rectangular and square section wire and bar – Guide to calculation and design – Torsion springs
BS EN ISO 2162-3-1996 Technical product documentation – Springs – Vocabulary
BS EN ISO 8752-1998 Spring-type straight pins – Slotted, heavy duty
BS EN 10092-2-2003 Hot rolled spring steel flat bars – Ribbed and grooved spring leaves – Dimensions and tolerances on shape and dimensions
BS EN 3372-008-2007 Aerospace series – Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous – Free plug with grounding spring – Product standard
BS EN 14817-2006 Railway applications – Suspension components – Air-spring control elements
BS EN 13906-3-2002 Cylindrical helical springs made from round wire and bar – Calculation and design – Torsion springs
BS EN 4167-2005 Aerospace series – Clips, spring tension, three parts – Inner clips in heat resisting steel FE-PA2601 A286
BS EN ISO 13337-1998 Spring-type straight pins – Slotted, light duty
BS EN 10270-2-2001 Steel wire for mechanical springs – Oil hardened and tempered spring steel wire
BS EN ISO 8748-2007 Spring-type straight pins – Coiled, heavy duty
BS 7612-1993 Specification for non-circular steel wire for mechanical springs
BS EN 14200-2004 Railway applications – Suspension components – Parabolic springs, steel
BS 4464-1969 Specification for spring washers for general engineering and automobile purposes – Metric series
BS A 360-2000 Retainers, spring, sheet metal, for self-locking barrel nuts – Dimensions
BS 1429-1980 Specification for annealed round steel wire for general engineering springs
BS 4638-1970 Specification for carbon steel wire for zigzag and square-form springs
BS EN 4420-2003 Aerospace series – Clips, spring tension, in alloy steel FE-PA3903
BS 8726-1-2002 Cylindrical helical springs made from rectangular and square section wire and bar – Guide to calculation and design – Compression springs
BS EN 10270-3-2001 Steel wire for mechanical springs – Stainless spring steel wire
BS EN 10089-2002 Hot rolled steels for quenched and tempered springs – Technical delivery conditions
BS 3673-3-1968 Specification for spring retaining rings – Carbon steel C clips
BS EN ISO 2162-2-1996 Technical product documentation – Springs – Presentation of data for cylindrical helical compression springs
BS 7568-4-1992 Press tools – Compression springs with rectangular section – Housing dimensions and colour coding
BS ISO 11901-1-2003 Tools for pressing – Gas springs – General specifications
BS EN ISO 8751-2007 Spring-type straight pins – Coiled, light duty
BS EN 1654-1998 Copper and copper alloys – Strip for springs and connectors
BS 7568-13-1992 Press tools – Elastomer pressure springs – Specification of accessories
BS 3123-1959 Specification for spring calipers and spring dividers
BS EN 15049-2007 Railway applications – Suspension components – Torsion bar, steel
BS 2061-1953 Specification for phosphor bronze spring washers for general engineering purposes
BS EN 10151-2002 Stainless steel strip for springs – Technical delivery conditions
BS 2S 203-2004 Carbon steel wire rod, wire and springs – High duty unground wire – Hardened and tempered – Specification
BS EN 4590-2005 Aerospace series – Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
BS 2930-1970 Specification for surgical spring trusses
BS EN 4585-2003 Aerospace series – Clips, spring tension – Technical specification
BS EN ISO 2162-1-1996 Technical product documentation – Springs – Simplified representation
BS 2S 204-2004 Chromium-vanadium steel wire rod, wire and springs – High duty ground wire – Hardened and tempered – Specification
BS 2B 33-2001 Copper-beryllium alloy wire and springs solution treated and precipitation treated
BS 3173-1996 Specification for spring units for mattresses
BS ISO 11901-2-2004 Tools for pressing – Gas springs – Specification of accessories
BS 3673-4-1977 Specification for spring retaining rings – Carbon steel circlips – metric series
BS 3182-5-1978 Textile machinery and accessories: healds, heald frames and reeds – Specification for metal reeds with double-spring baulk: dimensions
BS 2S 202-2004 Carbon steel wire rod, patented cold drawn carbon steel wire and springs – High duty ground wire – Specification
BS 3673-2-1965 Specification for spring retaining rings – Carbon steel E clips
BS 2HR 502-1973 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5
BS EN 4168-2005 Aerospace series – Clips, spring tension, three parts – Outer clips in heat resisting steel FE-PA2601 A286
BS 1726-3-2002 Cylindrical helical springs made from round wire and bar – Guide to methods of specifying, tolerances and testing – Torsion springs
BS 2S 513-1970 Specification for spring steel strip
BS 7438-1991 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 1802-1951 Specification for steel spring washers for general engineering and automobile purposes
BS 1726-1-2002 Cylindrical helical springs made from round wire and bar – Guide to methods of specifying, tolerances and testing – Compression springs
BS EN 13906-1-2002 Cylindrical helical springs made from round wire and bar – Calculation and design – Compression springs
BS EN 60352-7-2002 Solderless connections – Spring clamp connections – General requirements, test methods and practical guidance
BS EN 13906-2-2002 Cylindrical helical springs made from round wire and bar – Calculation and design – Extension springs
BS SP 59 and SP 60-1955 Specifications for spring catches for aeronautical purposes
BS EN 10132-4-2000 Cold rolled narrow steel strip for heat treatment – Technical delivery conditions – Spring steels and other applications
BS EN ISO 8750-2007 Spring-type straight pins – Coiled, standard duty
BS EN ISO 10427-1-2002 Petroleum and natural gas industries – Casing centralizers – Bow-spring casing centralizers
BS 7568-12-1992 Press tools – Elastomer pressure springs – General specification
BS 2S 201-2004 Carbon steel wire rod, patented cold drawn carbon steel wire and springs – High duty unground wire – Specifcation
BS S 206-1999 Chromium-nickel-aluminium corrosion resisting steel precipitation hardening rod, cold drawn wire and springs
BS EN 4166-2005 Aerospace series – Clips, spring tension, three parts – PTFE bushes
BS EN 10092-1-2003 Hot rolled spring steel flat bars – Flat bars – Dimensions and tolerances on shape and dimensions
BS EN 10270-1-2001 Steel wire for mechanical springs – Patented cold drawn unalloyed spring steel wire
STANDARDSDESCRIPTION
BS EN 14874-2005 Inland navigation vessels – Studless anchor chain – Cable lifter
BS EN 353-1-2002 Personal protective equipment against falls from a height – Guided type fall arresters including a rigid anchor line
BS EN 15361-2007 Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
BS EN 13573-2001 Inland navigation vessels – Anchoring coupling towing hauling and mooring systems
BS EN 15271-2007 Inland navigation vessels – Studless anchor chain – Anchor equipment
BS EN 14330-2004 Inland navigation vessels – Studless anchor chain – Round steel link chain
BS EN 1504-6-2006 Products and systems for the protection and repair of concrete structures – Definitions requirements quality control and evaluation of conformity – Anchoring of reinforcing steel bar
BS EN 353-2-2002 Personal protective equipment against falls from a height – Guided type fall arresters including a flexible anchor line
BS EN 1881-2006 Products and systems for the protection and repair of concrete structures – Test methods – Testing of anchoring products by the pull-out method
BS ISO 17339-2003 Ships and marine technology – Sea anchors for survival craft and rescue boats
BS EN 959-2007 Mountaineering equipment – Rock anchors – Safety requirements and test methods
BS 7464-1991 Specification for anchor winches for mobile offshore units
BS EN 568-2007 Mountaineering equipment – Ice anchors – Safety requirements and test methods
BS 7160-1990 Specification for anchor chains for small craft
BS EN 1537-2000 Execution of special geotechnical work – Ground anchors
BS EN 795-1997 Protection against falls from a height – Anchor devices – Requirements and testing
BS EN ISO 15084-2003 Small craft – Anchoring mooring and towing – Strong points
BS EN 14606-2004 Inland navigation vessels – Studless anchor chain – Accessories