Monel k-500 Springs, Wire Springs, Flat Springs, Retaining Rings

Monel k-500 Springs, Wire Springs, Flat Springs, Retaining Rings

£4.00

£4-£2079

Write A Review | Questions & Answers

Monel K-500 Springs are cold drawn springs with very high corrosion resistance. Monel 500 Springs are good for use in elevated temperature applications. Torqbolt is a prominent Monel K-500 Spring supplier in India.

– Finish: Pickling and Passivation

– Compatible Fasteners: monel K-500 Spring Washers | monel K-500 Flat Washers

– Marking: TorqBolt N05500

– Type: Cold Formed, Hot Formed, Bar Stock Machined, Bar Stock Milling

SKU: 100101456 Categories: , Tags: ,
000

Product Features

DimensionsTailor Made as per Clients requirements
EndsSquare Ends, Grounded Ends
Melt OriginEast Europe/South America/Korea/Japan
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

Monel k-500 Springs Specification

Monel Alloy K-500 is a precipitation- hardened Nickel-copper alloy that merges the corrosion resistance of Monel alloy 400 with higher strength and hardness. It possesses low permeability and is non-magnetic at temperatures as low as -150 degrees F (-101 Degrees C). Widely used for various industry applications such as pump shafts, oil-well tools and instruments, doctor blades and scrappers, spring valve trim, fasteners and marine propeller shafts etc.

Monel K-500 Properties

Chemical Mechanical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

ADDITIONAL INFORMATION

TorqBolt is a well known stockist of Spring Tempered Monel k-500 Wires from ¼ Inch to 4 inch & 6mm to 100mm in 50 Kg, 100 Kg & 500 Kg Coils. All Spring Tempered WIres are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

Monel is a registered trademark of Special Metals Corporation.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.