316 Stainless Steel Springs, ASTM A276 condition “B”, Wire Springs, Flat Springs, Retaining Rings

316 Stainless Steel Springs, ASTM A276 condition “B”, Wire Springs, Flat Springs, Retaining Rings

£0.39

£0.39-£1450

Write A Review | Questions & Answers

316 Stainless Steel Springs are cold drawn springs with a better corrosion resistance as compared to 302/304 springs. 316 Stainless Springs are used for high temperature applications without magnetism. Torqbolt is a prominent 316 Stainless Steel Spring supplier in India.

– Finish: Pickling and Passivation

– Compatible Fasteners: 316 Stainless Steel Spring Washers | 316 Stainless Steel Flat Washers

– Marking: TorqBolt S31600

– Type: Cold Formed, Hot Formed, Bar Stock Machined, Bar Stock Milling

000

Product Features

DimensionsTailor Made as per Clients requirements
EndsSquare Ends, Grounded Ends
Melt OriginIndia
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

316 Stainless Steel Springs Specification

AISI 316 is an austentic grade second to 304 in commercial importance It has additional molybdenum which gives improved corossion resistance when exposed to chlorides, it is immune to grain bundaries carbide precipitation. It is suited to use in heavy guage (over 6mm welded component) stainless steel 316 is used in food processing equipment, chemical and petrochemical equipment, coastal architecture, boat fittings, chemical transportation containers etc. It has good resistance to oxidation.

316 Stainless Steel Properties

Chemical Mechanical Physical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

ADDITIONAL INFORMATION

TorqBolt is a well known stockist of Spring Tempered 316 Stainless Steel Wires from ¼ Inch to 4 inch & 6mm to 100mm in 50 Kg, 100 Kg & 500 Kg Coils. All Spring Tempered WIres are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.